NightShadow
New Member
- Joined
- May 11, 2012
- Messages
- 1 (0.00/day)
Well, here's my story: I tried to flash the new MSI BIOS. It bricked the card. Nada. Black screen. So I switched to the backup BIOS and found this site. Tried the simple update from here. Box poped up saying I had successfully updated the card to the same firmware it already had on it. Rebooted. Nothing. Still a brick. Tried to reflash the stock firm. Nope. Brick.
I don't get it. The flasher says it was a good flash. It is the correct card. Correct firmware.
The card seems dead but only with the switch in position #1. Works fine in #2, just not as fast as I'd like it.
I did the same but found a way to restore it (I know I'm late on the topic, but someone might read this and find it useful)
1st, you will need a "dos bootable usb drive" (google it, it usually uses files from win98..)
2nd, copy the files from msi to this usb drive (http://www.vortez.net/articles_pages/msi_r6950_twin_froz_iii_power_edition_unlocking,1.html) -- click "download the BIOS here"
3rd, set the bios switch to 2 (backup that works)
4th, boot computer from usb drive
5th, change bios switch to 1 (the bricked one)
6th, follow the two steps from MSI (cd\ati389, then, atiflash -p -f 0 r6950pex.bin)
7th UNBRICKED restart computer
Sadly, this only means your card was lasercut and you can't unlock the shaders. On the other hand, in doing this you have successfully unlocked the max clocks, you can now boost it up to 1300MHz gpu and 1600 for the memory (though I don't really recommend it!)
4th,