[PLEASE READ ALL OF THIS
]
I know that.
But listen, my GPU is not outputting any signal, and PC doesn't want to POST or BOOT, just a black screen and fans spining, on a full speed.
Yes i have everything plugged in, a display cable is in DVI port, on a Sapphire GPU, yes the power is connected to my GPU via 6pin. YES my GPU is inserted in a PCIEx16 port
Yes i tested every one of display ports on my GPU, including HDMI and DisplayPort.
If i unplug the 6-pin connector, and put the display cable in iGPU my PC can start.
I can leave my GPU in a PCIEx16 port without 6pin, with cable connected to my iGPU and it POST's.
As soon as I plug 6pin in my Sapphire GPU, PC doesn't want to even POST.
I am not dumb, i tried everything. I know what I am doing, i fucked up, and i want to know if I can repair that.
If the card is fried, dead, burned to ashes, i will accept that, but i just want to try to repair it, is there an option of soldering something, or unsoldering something on a PCB of GPU to repair FlashChip/BIOS?
How can i flash the GPU when my PC won't post with it being plugged in, and when i unplug 6pin, it won't even detect that, something is in PCIEx16 port.
It's not like; "Ohh I don't get the signal, but PC posts, and goes to Windows, i can hear windows noises, without displaying anything" If it were like that Autoexec would got it done, but it doesn't even POST
I know i am repeating myself a lot, but i just want You to know that i very appreciate Your help, and that, You are wasting Your time on My problems, but You're giving me thing to try, that I already have tried
I tried to say as clear as I can what the problem is, english is NOT my native language, but i am trying my best, to at least make any sense
P.S.
About BIOS of my MOBO, that GPU worked in that PC before.
I have 2 of them, both were inside at some point and they were working without any problems, but I will update my BIOS tommorow, and will tell You if something changed.