- Joined
- Feb 10, 2008
- Messages
- 3,393 (0.57/day)
- Location
- BC.CAN
Processor | 2700x under H100i progeebee |
---|---|
Motherboard | ASUS x470 prime |
Cooling | Fans |
Memory | gskill ripjaw 3200 |
Video Card(s) | MSi Vega 64 ref |
Storage | 120Gb OCZ Vertex 2E SSD - 500Gb Games - 1.5tb Storage and Media |
Case | CM HAF 932 |
Power Supply | Corsair TX750 |
Software | Win 10 |
Hi all. I've been busting my ass installing and reinstalling my CPU cooler hoping to get better temps than I have been. Maybe my expectations are too high.
I replaced the stock cooler a) because it's really loud when it's effective and b) because I figured I could get more from a massive heatsync. Enter the Cooler Master MA620P. It's huge, It has good fans, and 6 heat pipes vs the 4 pipes on the stock cooler. Not to mention its almost 4x the surface area of the stock cooler.
In the end the temps Im getting arent as good as I expected...
As I remounted the cooler for the 4th time I decided to look closer. I did notice scratch/deformity in the base of the MA620p and I wondering if it's been part of the problem.
I should also mention that I've tried a few different methods of applying the TIM and Ive tried the included CM Master Gel and AS5.
What temps should I expect when running the CPUz stress test or Prime95 Small FFTs?
Here's a photo of the base for consideration.
I replaced the stock cooler a) because it's really loud when it's effective and b) because I figured I could get more from a massive heatsync. Enter the Cooler Master MA620P. It's huge, It has good fans, and 6 heat pipes vs the 4 pipes on the stock cooler. Not to mention its almost 4x the surface area of the stock cooler.
In the end the temps Im getting arent as good as I expected...
As I remounted the cooler for the 4th time I decided to look closer. I did notice scratch/deformity in the base of the MA620p and I wondering if it's been part of the problem.
I should also mention that I've tried a few different methods of applying the TIM and Ive tried the included CM Master Gel and AS5.
What temps should I expect when running the CPUz stress test or Prime95 Small FFTs?
Here's a photo of the base for consideration.