Can the new P35 chip motherboard accept ddr2

[trt740]

they say ddr 3 but are they backwards compatable with ddr2 anyone

 

[infrared]

They come for either DDR2 or DDR3. I believe there's a Gigabyte board that has the slots for both types of ram.

The P35 chipset doesn't seem too efficient with DDR2, and doesn't perform well 1:1. You have to use a higher divider, and get some high frequencies to get the best out of this chipset. It looks like it might be worth waiting a bit for ddr3 to mature, but by then there will probably have been quite a lot of intel chipsets made and then replaced

 

[DOM]

no, there 240-pin but there not the same as DDR2 how they line up I think so not sure

but im sure you seen the boards with DDR2 and 3 slots ??

 

[infrared]

Here's my results with the board so far. These are my 24/7 settings, but even when i push to 1240mhz + on the ram, i can't seem to break 10,000mb/s, which i could do quite easily on my old i975 board.

 

[LiveOrDie]

intels P35 Chipset can take DDR2 or DDR3 depending on the board but DDR3 mother boards arnt Backwoulds Compatible only if the board has both ram slots

 

[Wile E]

Here's my results with the board so far. These are my 24/7 settings, but even when i push to 1240mhz + on the ram, i can't seem to break 10,000mb/s, which i could do quite easily on my old i975 board.

Yeah, that board was a beast with the ram. I remember having both tighter timings AND higher clocks than you, and you still whipped my az in mem throughput. lol

 

[trt740]

http://www.newegg.com/Product/Product.aspx?Item=N82E16813127030 this is the board I was going to get it's supposed to do 500 fsb but Evga did the right thing is exchanging my old tr board sending me a free A1 board that will almost match it and unlike my TR board will overclock a quad core. They have a upgrade program for the quad bug. The A1 has a better power system ocing the quad for effiecently.