Aorus X570 Master

[Ricardo Sonoda]

Hello people ! sorry about my English !! I have a problem with the Aorus X570 master, I set everything up correctly, I installed Windows, all ok! The problem started when I was downloading is memory latency (g-skill 3600 cl17) for cl16, I selected the option to save and restart, did not come back anymore! I bought new memories and it did not work! discarding the problem in the memories!
I did the clear cmos on the battery, by the jumper, by the Mb button, it did not come back! In the MB code 07 appears and the Dram LED is on!

 

[kapone32]

Just a question why does the RAM closest to the CPU seem a bit askew? Try to re seat your RAM and see if that helps.

 

[Ricardo Sonoda]

Thank you so much for answering! I dismounted from disassembled 2x! I believe the problem is in bios that does not reset

Just a question why does the RAM closest to the CPU seem a bit askew? Try to re seat your RAM and see if that helps.

 

[jesdals]

Could it be D7 instead of 07, no Console Input Device are found? Not that it makes much sence. But it does seem to be a memory error due to the led light at the bottom. But I cant see any info in the manual either - have you tried to boot with just one stick?

 

[Ricardo Sonoda]

Could it be D7 instead of 07, no Console Input Device are found? Not that it makes much sence. But it does seem to be a memory error due to the led light at the bottom. But I cant see any info in the manual either - have you tried to boot with just one stick?

no device is found! no image and nothing! I bought new memories and tested them one by one in all slots! I'm almost sure it's a bios! how do I boot the pendrive with bios ??

 

[kapone32]

no device is found! no image and nothing! I bought new memories and tested them one by one in all slots! I'm almost sure it's a bios! how do I boot the pendrive with bios ??

You need to go to the Gigabyte website and download the BIOS. Make sure your pendrive is formatted as FAT32. Go into the bios and look for the instant flash option. Run that and it should find the file on your pendrive. Follow the instructions and it should update. I am not sure but you should be able to update the BIOS without a CPU or RAM on that board.

 

[Ricardo Sonoda]

You need to go to the Gigabyte website and download the BIOS. Make sure your pendrive is formatted as FAT32. Go into the bios and look for the instant flash option. Run that and it should find the file on your pendrive. Follow the instructions and it should update. I am not sure but you should be able to update the BIOS without a CPU or RAM on that board.

can not access the bios, I have no image on the monitor

 

[azngreentea01]

Try to re-sit your slide, by using A2 and B2.

And the list of Gksill memory being support:

X570 AORUS MASTER (rev. 1.0) Support | Motherboard - GIGABYTE Global

Lasting Quality from GIGABYTE.GIGABYTE Ultra Durable™ motherboards bring together a unique blend of features and technologies that offer users the absolute ...

www.gigabyte.com

 

[TheLostSwede]

Had some funny crap when I set the memory timings wrong on my board as well. The watchdog simply wouldn't kick in.
Had to press the rear reset CMOS button for 10 seconds and then it took the board a little while to come back up.
Worst case, flip the switch to the backup BIOS chip, it should allow you to boot at least.

 

[Ricardo Sonoda]

Had some funny crap when I set the memory timings wrong on my board as well. The watchdog simply wouldn't kick in.
Had to press the rear reset CMOS button for 10 seconds and then it took the board a little while to come back up.
Worst case, flip the switch to the backup BIOS chip, it should allow you to boot at least.

thank you! already tried the button too!

 

[TheLostSwede]

thank you! already tried the button too!

But did you hold it pressed for 10 seconds, not just a quick press?

 

[oxrufiioxo]

thank you! already tried the button too!

Have you tried switching to the secondary Bios?

1-8 page 23 of the manual.

 

[Ricardo Sonoda]

But did you hold it pressed for 10 seconds, not just a quick press?

I'll try again

Have you tried switching to the secondary Bios?

1-8 page 23 of the manual.

I'll take a closer look.

 

[oxrufiioxo]

I'll try again


I'll take a closer look.

The board also supports usb bios flashback you could try updating the bios that way

 

[neko77025]

Did u solve this? I am having same issue... It has happy with 2 motherboards and 2 dodgier sets of ram... Have use clear cmos and even removed the battery

was talking about it here.

New PC issues...weird

Ok, so got A R7 3700x, Gigabyte Around master x570 , gskill 2x16gb DDR4 3200 c14 xpg 8200 pro... Already have g3 750w gold pay & RTX 2080. First time setting it up no post, just looped endlessly could here go fans raving over & over. Did a q flash and got 2 bios, then installed windows...

www.techpowerup.com

I have got it back into windows by Using Q Flash ( but is the same bios as it was)

This keeps happing . have replaced this motherboard and used .. 2 diffrent sets of ram.


Its almost like the bios goes bad and you can clear cmos

 

[valle]

Has anyone managed to solve this? I joined this forum specifically for this thread.

I have an Aorus X570 Master with a GTX 1070, Ryzen 7 3700x, and 4 16Gb sticks of Corsair Vengeance 3200MHz RAM. My pc was running fine for about a week and then I started a Windows update and walked away. When I tried to turn on the computer some time later it wouldn't post and I got the same 07 error code and DRAM LED that the OP has.

I have tried:

• unplugging all peripherals
• taking out the GPU and putting it back
• unplugging all the RAM and putting it back
• unplugging two of the RAM sticks so that the remaining two are in A2 and B2
• leaving just one RAM stick in the A1 slot
• clearing CMOS with the button
• clearing CMOS by shorting the pins
• using q-flash with a new FAT-32 formatted flash drive with the CPU in. (USB LED blinked, but Q-flash button did not)
• using q-flash with a several year old FAT-32 formatted flash drive with the CPU in. (USB LED blinked, but Q-flash button did not)
• using q-flash with a several year old FAT-32 formatted flash drive with the CPU OUT. (USB LED blinked, but Q-flash button did not)
• attempting to start with the backup BIOS switch flipped
• connecting to the monitor with an HDMI cable instead of Display Port

So far nothing has made any difference. I still get the 07 error code and the DRAM LED lit. Every 15 seconds or so it will cycle quickly through some other codes like 14, 15, 36, 63, 92, CC, and C8, and the CPU LED will very briefly come on.

 

[TheLostSwede]

Did u solve this? I am having same issue... It has happy with 2 motherboards and 2 dodgier sets of ram... Have use clear cmos and even removed the battery

was talking about it here.

New PC issues...weird

Ok, so got A R7 3700x, Gigabyte Around master x570 , gskill 2x16gb DDR4 3200 c14 xpg 8200 pro... Already have g3 750w gold pay & RTX 2080. First time setting it up no post, just looped endlessly could here go fans raving over & over. Did a q flash and got 2 bios, then installed windows...

www.techpowerup.com

I have got it back into windows by Using Q Flash ( but is the same bios as it was)

This keeps happing . have replaced this motherboard and used .. 2 diffrent sets of ram.


Its almost like the bios goes bad and you can clear cmos

Not sure what's going on with your gear, but I've reset my CMOS 3-4 times so far, using the rear button, no problems.

 

[neko77025]

Has anyone managed to solve this? I joined this forum specifically for this thread.

I have an Aorus X570 Master with a GTX 1070, Ryzen 7 3700x, and 4 16Gb sticks of Corsair Vengeance 3200MHz RAM. My pc was running fine for about a week and then I started a Windows update and walked away. When I tried to turn on the computer some time later it wouldn't post and I got the same 07 error code and DRAM LED that the OP has.

I have tried:

• unplugging all peripherals
• taking out the GPU and putting it back
• unplugging all the RAM and putting it back
• unplugging two of the RAM sticks so that the remaining two are in A2 and B2
• leaving just one RAM stick in the A1 slot
• clearing CMOS with the button
• clearing CMOS by shorting the pins
• using q-flash with a new FAT-32 formatted flash drive with the CPU in. (USB LED blinked, but Q-flash button did not)
• using q-flash with a several year old FAT-32 formatted flash drive with the CPU in. (USB LED blinked, but Q-flash button did not)
• using q-flash with a several year old FAT-32 formatted flash drive with the CPU OUT. (USB LED blinked, but Q-flash button did not)
• attempting to start with the backup BIOS switch flipped
• connecting to the monitor with an HDMI cable instead of Display Port

So far nothing has made any difference. I still get the 07 error code and the DRAM LED lit. Every 15 seconds or so it will cycle quickly through some other codes like 14, 15, 36, 63, 92, CC, and C8, and the CPU LED will very briefly come on.

Man I feel for you ... I have been dealing with this issue for 2 weeks .. even had new egg replace the motherboard and orderd another set of ram .

Come to find out its the newest bios they have released .. its bad .. i have have read A few things about it .. and everything points to F5I (the newest one as of right now) .. if you can roll back to F5g it seems to fix it. If you look at the gigabyte forums .. their are so many post about issues with their bios ... even a few about this ...

Clear Cmos wont work at all .. its bricking the bios .. however I got it back up and running Qflash Plus and Bios F5g ...

As for Qflash Plus ... Make sure you do these steps.

Put your bios switch back to stock
you need to have 24pin and 4pin PSU plugged

Download Bios F5g to A fat 32 USB drive
rename it to
gigabyte.bin
put the USB drive in the White USB slot
Press the Q flash + button ...
Sit back and wait ...
USB drive will flash and then the motherboard will turn on ... then the Qbutton should flash ... should take like 5 mins or so ...
but you will then see the it come on.

Not sure what's going on with your gear, but I've reset my CMOS 3-4 times so far, using the rear button, no problems.

man read the gigabyte forums .. its bad .. alot of people are having this same issue ... this bios is going bad cant do anything .. happens after A reset or shutdown.

 

[TheLostSwede]

Has anyone managed to solve this? I joined this forum specifically for this thread.

I have an Aorus X570 Master with a GTX 1070, Ryzen 7 3700x, and 4 16Gb sticks of Corsair Vengeance 3200MHz RAM. My pc was running fine for about a week and then I started a Windows update and walked away. When I tried to turn on the computer some time later it wouldn't post and I got the same 07 error code and DRAM LED that the OP has.

I have tried:

• unplugging all peripherals
• taking out the GPU and putting it back
• unplugging all the RAM and putting it back
• unplugging two of the RAM sticks so that the remaining two are in A2 and B2
• leaving just one RAM stick in the A1 slot
• clearing CMOS with the button
• clearing CMOS by shorting the pins
• using q-flash with a new FAT-32 formatted flash drive with the CPU in. (USB LED blinked, but Q-flash button did not)
• using q-flash with a several year old FAT-32 formatted flash drive with the CPU in. (USB LED blinked, but Q-flash button did not)
• using q-flash with a several year old FAT-32 formatted flash drive with the CPU OUT. (USB LED blinked, but Q-flash button did not)
• attempting to start with the backup BIOS switch flipped
• connecting to the monitor with an HDMI cable instead of Display Port

So far nothing has made any difference. I still get the 07 error code and the DRAM LED lit. Every 15 seconds or so it will cycle quickly through some other codes like 14, 15, 36, 63, 92, CC, and C8, and the CPU LED will very briefly come on.

I think you might want to ping Gigabyte support at this point...

Man I feel for you ... I have been dealing with this issue for 2 weeks .. even had new egg replace the motherboard and orderd another set of ram .

Come to find out its the newest bios they have released .. its bad .. i have have read A few things about it .. and everything points to F5I (the newest one as of right now) .. if you can roll back to F5g it seems to fix it. If you look at the gigabyte forums .. their are so many post about issues with their bios ... even a few about this ...

Clear Cmos wont work at all .. its bricking the bios .. however I got it back up and running Qflash Plus and Bios F5g ...

As for Qflash Plus ... Make sure you do these steps.

Put your bios switch back to stock
you need to have 24pin and 4pin PSU plugged

Download Bios F5g to A fat 32 USB drive
rename it to
gigabyte.bin
put the USB drive in the White USB slot
Press the Q flash + button ...
Sit back and wait ...
USB drive will flash and then the motherboard will turn on ... then the Qbutton should flash ... should take like 5 mins or so ...
but you will then see the it come on.

man read the gigabyte forums .. its bad .. alot of people are having this same issue ... this bios is going bad cant do anything .. happens after A reset or shutdown.

The latest UEFI is F5n, but I didn't have issues with F5l either.
Note that F5n seem to be limited to max 3600MHz RAM though.

GIGABYTE Latest Beta BIOS

Warning Some of beta BIOSes are still undergoing compatibility testing. GIGABYTE is sharing these BIOSes for testing purposes only and are not meant f

forums.tweaktown.com

 

[neko77025]

The latest UEFI is F5n, but I didn't have issues with F5l either.

GIGABYTE Latest Beta BIOS

Warning Some of beta BIOSes are still undergoing compatibility testing. GIGABYTE is sharing these BIOSes for testing purposes only and are not meant f

forums.tweaktown.com

Where do you see F5n ...

X570 AORUS MASTER (rev. 1.0) Support | Motherboard - GIGABYTE U.S.A.

Lasting Quality from GIGABYTE.GIGABYTE Ultra Durable™ motherboards bring together a unique blend of features and technologies that offer users the absolute ...

www.gigabyte.com

Last i see is F5I


and look all these

x570 master d7 error | GIGABYTE USA Forum

Hi I have a x570 master with a big problem, it doesn't even come to bios, I tried to unplug all cables, to put another wings, other RAM on every single slot, another vga remains only the master t

forum.gigabyte.us

X570 Aorus master odd bios behavior | GIGABYTE USA Forum

So I got everything installed, was on bios F3. Updated to F5e as it is the latest on the website. Got booted back into Windows, and the firmware update tool popped up. It said I had an update. I let

forum.gigabyte.us

X570 Master - 3900X : Fails on 4x16Gb 3600Mhz XMP | GIGABYTE USA Forum

3900X X570 Master with F5g bios 4 x 16 Gb GSkill Trident Royal 3600 Mhz 19-20-20 1.35v Won't post when XMP is enabled. Entering manually the same spec result in the Bios or Windows fre

forum.gigabyte.us

their are A ton more .. but all basicly the same issue when you read them.

Where do you see F5n ...

X570 AORUS MASTER (rev. 1.0) Support | Motherboard - GIGABYTE U.S.A.

Lasting Quality from GIGABYTE.GIGABYTE Ultra Durable™ motherboards bring together a unique blend of features and technologies that offer users the absolute ...

www.gigabyte.com

Last i see is F5I


and look all these

x570 master d7 error | GIGABYTE USA Forum

Hi I have a x570 master with a big problem, it doesn't even come to bios, I tried to unplug all cables, to put another wings, other RAM on every single slot, another vga remains only the master t

forum.gigabyte.us

X570 Aorus master odd bios behavior | GIGABYTE USA Forum

So I got everything installed, was on bios F3. Updated to F5e as it is the latest on the website. Got booted back into Windows, and the firmware update tool popped up. It said I had an update. I let

forum.gigabyte.us

X570 Master - 3900X : Fails on 4x16Gb 3600Mhz XMP | GIGABYTE USA Forum

3900X X570 Master with F5g bios 4 x 16 Gb GSkill Trident Royal 3600 Mhz 19-20-20 1.35v Won't post when XMP is enabled. Entering manually the same spec result in the Bios or Windows fre

forum.gigabyte.us

their are A ton more .. but all basicly the same issue when you read them.

Its also not just the master .. the elite is having the same issue

 

[TheLostSwede]

Where do you see F5n ...

X570 AORUS MASTER (rev. 1.0) Support | Motherboard - GIGABYTE U.S.A.

Lasting Quality from GIGABYTE.GIGABYTE Ultra Durable™ motherboards bring together a unique blend of features and technologies that offer users the absolute ...

www.gigabyte.com

Last i see is F5I


and look all these

x570 master d7 error | GIGABYTE USA Forum

Hi I have a x570 master with a big problem, it doesn't even come to bios, I tried to unplug all cables, to put another wings, other RAM on every single slot, another vga remains only the master t

forum.gigabyte.us

X570 Aorus master odd bios behavior | GIGABYTE USA Forum

So I got everything installed, was on bios F3. Updated to F5e as it is the latest on the website. Got booted back into Windows, and the firmware update tool popped up. It said I had an update. I let

forum.gigabyte.us

X570 Master - 3900X : Fails on 4x16Gb 3600Mhz XMP | GIGABYTE USA Forum

3900X X570 Master with F5g bios 4 x 16 Gb GSkill Trident Royal 3600 Mhz 19-20-20 1.35v Won't post when XMP is enabled. Entering manually the same spec result in the Bios or Windows fre

forum.gigabyte.us

their are A ton more .. but all basicly the same issue when you read them.

You know, if you slowed down for 1 second and actually read my post, you would've seen there was a link...

Mate of mine at Gigabyte suggested to remove the CPU and then do Q-Flash.

Apparently AGESA 1.0.0.4 is incoming.

 

[Eskimonster]

So glad i read this, i was going to buy a master.... guess ill wait & give bios some maturing time.

 

[TheLostSwede]

So glad i read this, i was going to buy a master.... guess ill wait & give bios some maturing time.

I've had zero issues with my board, as mentioned above.
New UEFI most likely out next week, with new AGESA.

Looks like UEFI F5o is out, using the link above.

 

[jesdals]

Im also happy with mine, but only using 2 stick of memory, currently running 5i bios.

 

[oxrufiioxo]

0 issues on the master here also but only running 2 sticks of ram.

Also on the 5i bios.