• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

TPU's Nostalgic Hardware Club

Joined
Jan 1, 2015
Messages
1,800 (0.53/day)
Location
EU
System Name Adison "Open Space" 19
Processor Intel Pentium II, 350MHz
Motherboard Chaintech 6BTM, Slot 1
Cooling SECC Cartridge
Memory 1x 64MB, PC100
Video Card(s) ATI Rage IIc AGP, Diamond Monster 3DII 12MB
Storage BTC BCD-40XH, Quantum Fireball 3.5 Series, EX6.4 GB
Display(s) LG StudioWorks 57M
Case Adison Midi Tower, ATX
Audio Device(s) Creative SoundBlaster 128
Power Supply Codegen 300W
Mouse Genius SlimStar 110, PS/2
Keyboard Genius SlimStar 110, PS/2
Software Microsoft Windows 98
BE6 is the vanilla board without RAID, and the BE6-II has the same HPT366 controller as my Soyo SY-6BA+IV.
Checked earlier today, turns out I got two BE-6II. Used to have one BE-6, but it seems I threw it away. (had a severe cap issues, to the point where I didn't want to invest any more time or money into it)
 
Last edited:
Joined
Jul 5, 2013
Messages
25,559 (6.48/day)
Thanks. If I'm right, it's limited to 137/128GB for each drive?
You're thinking of the artificial FAT32 limitation imposed by Microsoft. If you use a quality partition tool, such as AOMEI, FAT32 can be used in drives up to 2TB(2TB volume limitation).
 
Joined
Jan 16, 2014
Messages
747 (0.20/day)
Location
Bacau, Romania
System Name Star Platinum
Processor Intel Core i5-3470 3.20GHz
Motherboard Gigabyte B75M-D3H
Cooling EKL
Memory 16GB DDR3-1600
Video Card(s) Gigabyte GTX650 1GB GDDR5
Storage 2x Seagate ST31000340NS 1TB SATA II
Display(s) Samsung 32 inch
Case Delux MG760
Audio Device(s) Realtek High Definition Audio + X-Fi XtremeGamer SB0730
Power Supply FSP Bluestorm II 500W
Mouse Marvo KM400 Mouse
Keyboard Marvo KM400 keyboard
Software Windows 10 Enterprise LTSC 1809
Checked earlier today, turns out I got two BE-6II. Used to have one BE-6, but it seems I threw it away. (had a severe cap issues, to the point where I didn't want to invest any more time or money into it)
That's the exact reason Soyo and ABIT went under in USA. Soyo was banned because of using crapcaps (my 6BA+IV is filled to the brim with Wendell caps) and ABIT went bankrupt after a lawsuit that covered a whole range of Slot1/Skt370 boards, notably BE6, BE6-II, VP6, BP6, and a lot others.

From those two, Soyo still sells boards (they produced H61 boards!) in the Asia and Eurasia market (I've seen russian people buy H61 and AMD A77 boards manufactured by Soyo).

Gotta love them though for the fact that their English manual is up there with Gigabyte and MSI. At least the PDF for my 6BA+IV was nicely written.
 
Joined
Jul 5, 2013
Messages
25,559 (6.48/day)
Soyo was banned because of using crapcaps
They were never "banned". They just couldn't sell anything and went out of business by natural attrition.
ABIT went bankrupt after a lawsuit that covered a whole range of Slot1/Skt370 boards, notably BE6, BE6-II, VP6, BP6, and a lot others.
Never heard about that either. Never had any issues with the boards you mentioned either.
 
Joined
Mar 23, 2016
Messages
4,839 (1.64/day)
Processor Ryzen 9 5900X
Motherboard MSI B450 Tomahawk ATX
Cooling Cooler Master Hyper 212 Black Edition
Memory VENGEANCE LPX 2 x 16GB DDR4-3600 C18 OCed 3800
Video Card(s) XFX Speedster SWFT309 AMD Radeon RX 6700 XT CORE Gaming
Storage 970 EVO NVMe M.2 500 GB, 870 QVO 1 TB
Display(s) Samsung 28” 4K monitor
Case Phantek Eclipse P400S (PH-EC416PS)
Audio Device(s) EVGA NU Audio
Power Supply EVGA 850 BQ
Mouse SteelSeries Rival 310
Keyboard Logitech G G413 Silver
Software Windows 10 Professional 64-bit v22H2
Never heard about that either. Never had any issues with the boards you mentioned either.
Last I understood was the talent responsible for Abit's well regarded overclocking boards left for DFI.

Wikipedia said:
Abit had somewhat of a blow in March 2003, when Oskar Wu, a leading engineer on the famous Abit NF7-S motherboard, resigned after the NForce series to become head of the LANParty range at competitor DFI.

On 15 December 2004, the Taiwan Stock Exchange downgraded ABIT's stock due to questionable accounting practices. Investigations revealed that the majority of their import/export business was conducted through seven companies, all located at the same address and each of which had a capital of only HK$2. This made it easy to inflate the reported number of motherboards sold. The Hong Kong media also reported that the management was being investigated for embezzling funds from the company.

In June 2005, ABIT partnered with Wan Hai Industries. This container shipping company, also a principal investor in China Airlines, brought the company much needed capital,[10] since the company had financial problems at this time, partly due to a class action lawsuit involving faulty capacitors on their products, but also because of marketing highly technical products to the general public while offering longer-than-average warranties and generous return policies.

On 25 January 2006, ABIT announced that USI intended to purchase ABIT Computer's motherboard business and brand and announced a special shareholders meeting to discuss the sale of ABIT's Neihu building, changing ABIT's company name, the disposition of the company's assets, and the release of the directors from non-competition restrictions. ABIT sold its own office building in Taipei to Deutsche Bank in order to raise money to cut its debt.

Following USI's acquisition of the motherboard business, the remaining divisions of ABIT switched to distributing components and networking products, while using its Suzhou, China plant only to offer some motherboard contract manufacturing services.

The acquired motherboard business and the 'ABIT' brand name were used by USI under the new brand name Universal abit. In the US, it was known as Universal abit USA Corporation. The old company, ABIT Computer Corporation (USA), is now dissolved and is no longer in existence.

Universal Abit later announced that it would close on 31 December 2008, and officially cease to exist on 1 January 2009.[2] By 2009, Abit no longer sold motherboards.

 
Joined
Jul 5, 2013
Messages
25,559 (6.48/day)
Last I understood was the talent responsible for Abit's well regarded overclocking boards left for DFI.
That I'd heard about.

But this I'd not;

Thanks for the info!
 
Joined
Jan 16, 2014
Messages
747 (0.20/day)
Location
Bacau, Romania
System Name Star Platinum
Processor Intel Core i5-3470 3.20GHz
Motherboard Gigabyte B75M-D3H
Cooling EKL
Memory 16GB DDR3-1600
Video Card(s) Gigabyte GTX650 1GB GDDR5
Storage 2x Seagate ST31000340NS 1TB SATA II
Display(s) Samsung 32 inch
Case Delux MG760
Audio Device(s) Realtek High Definition Audio + X-Fi XtremeGamer SB0730
Power Supply FSP Bluestorm II 500W
Mouse Marvo KM400 Mouse
Keyboard Marvo KM400 keyboard
Software Windows 10 Enterprise LTSC 1809
They were never "banned". They just couldn't sell anything and went out of business by natural attrition.
Soyo still produces boards in Asia. Here's a FM2 Soyo board.
 
Joined
Jul 3, 2016
Messages
758 (0.27/day)
LUNIZ -- I GOT 5 ON IT

:D W.I.P. aka Work In Progress. :D

I never thought that I'll love P4 stuff. Time proved me wrong. :) P4P800 DELUXE and P4C800 DELUXE with an Asrock twist to spice things up. :D Yummy!!!

Cleaning is the order of the day, today and tomorrow to the infinity included. :D

I have tons of new HW to test but I decided to clean them first and ask questions later. :D We'll see if this was the right decision or not ... :D

More later.
 

Attachments

  • PRW-FM19-17.jpg
    PRW-FM19-17.jpg
    1.9 MB · Views: 151
  • PRW-FM19-21.jpg
    PRW-FM19-21.jpg
    1.3 MB · Views: 164
  • PRW-FM19-22.jpg
    PRW-FM19-22.jpg
    1.5 MB · Views: 186
  • PRW-FM19-23.jpg
    PRW-FM19-23.jpg
    1 MB · Views: 169
  • PRW-FM19-24.jpg
    PRW-FM19-24.jpg
    2 MB · Views: 184
Last edited:
Joined
Mar 23, 2016
Messages
4,839 (1.64/day)
Processor Ryzen 9 5900X
Motherboard MSI B450 Tomahawk ATX
Cooling Cooler Master Hyper 212 Black Edition
Memory VENGEANCE LPX 2 x 16GB DDR4-3600 C18 OCed 3800
Video Card(s) XFX Speedster SWFT309 AMD Radeon RX 6700 XT CORE Gaming
Storage 970 EVO NVMe M.2 500 GB, 870 QVO 1 TB
Display(s) Samsung 28” 4K monitor
Case Phantek Eclipse P400S (PH-EC416PS)
Audio Device(s) EVGA NU Audio
Power Supply EVGA 850 BQ
Mouse SteelSeries Rival 310
Keyboard Logitech G G413 Silver
Software Windows 10 Professional 64-bit v22H2
Joined
Jan 1, 2015
Messages
1,800 (0.53/day)
Location
EU
System Name Adison "Open Space" 19
Processor Intel Pentium II, 350MHz
Motherboard Chaintech 6BTM, Slot 1
Cooling SECC Cartridge
Memory 1x 64MB, PC100
Video Card(s) ATI Rage IIc AGP, Diamond Monster 3DII 12MB
Storage BTC BCD-40XH, Quantum Fireball 3.5 Series, EX6.4 GB
Display(s) LG StudioWorks 57M
Case Adison Midi Tower, ATX
Audio Device(s) Creative SoundBlaster 128
Power Supply Codegen 300W
Mouse Genius SlimStar 110, PS/2
Keyboard Genius SlimStar 110, PS/2
Software Microsoft Windows 98
Abit boards were notorious for their capacitor problems... BE-6 & BE-6II in particular!

I remember one time, when Abit board scared the crap out of me. I was working on an old Pentium III system, and had it plugged into the mains, but the system was shut down. Not standing-by, not hybernating, it was shut down. I turned my back to the tower case, and wanted to do a quick research on drivers & manuals. There was no one else in the room, or even close to me when all of the sudden & without any warnings, I heard the noise behind me ... the system turned itself on! To make things even better, this incident happened only a day or two after my dad passed away!

You can probably imagine the look on my face, when that happened :D Then, years later I was working on a BE-6II board and the same thing happened all over again. Which finally helped me connect all the dots together. Funny though, I never had the similar experience with ANY other board. Regardless of the age, socket (or slot) and brand. Abit sucks ... period!
 
Joined
Jul 5, 2013
Messages
25,559 (6.48/day)
Soyo still produces boards in Asia. Here's a FM2 Soyo board.
That looks pretty solid to me.

LUNIZ -- I GOT 5 ON IT

:D W.I.P. aka Work In Progress. :D

I never thought that I'll love P4 stuff. Time proved me wrong. :) P4P800 DELUXE and P4C800 DELUXE with an Asrock twist to spice things up. :D Yummy!!!

Cleaning is the order of the day, today and tomorrow to the infinity included. :D

I have tons of new HW to test but I decided to clean them first and ask questions later. :D We'll see if this was the right decision or not ... :D

More later.
Good stuff! That P4 was one of the best ones ever made. The Northwood cores were very easy to OC.
 
Last edited:
Joined
Jan 16, 2014
Messages
747 (0.20/day)
Location
Bacau, Romania
System Name Star Platinum
Processor Intel Core i5-3470 3.20GHz
Motherboard Gigabyte B75M-D3H
Cooling EKL
Memory 16GB DDR3-1600
Video Card(s) Gigabyte GTX650 1GB GDDR5
Storage 2x Seagate ST31000340NS 1TB SATA II
Display(s) Samsung 32 inch
Case Delux MG760
Audio Device(s) Realtek High Definition Audio + X-Fi XtremeGamer SB0730
Power Supply FSP Bluestorm II 500W
Mouse Marvo KM400 Mouse
Keyboard Marvo KM400 keyboard
Software Windows 10 Enterprise LTSC 1809
That looks pretty solid to me.
Yeah, it is. They also sell under the Maxsun brand, and they've been making some awesome boards for the recent chipsets. (such as B350)

Abit boards were notorious for their capacitor problems... BE-6 & BE-6II in particular!

I remember one time, when Abit board scared the crap out of me. I was working on an old Pentium III system, and had it plugged into the mains, but the system was shut down. Not standing-by, not hybernating, it was shut down. I turned my back to the tower case, and wanted to do a quick research on drivers & manuals. There was no one else in the room, or even close to me when all of the sudden & without any warnings, I heard the noise behind me ... the system turned itself on! To make things even better, this incident happened only a day or two after my dad passed away!

You can probably imagine the look on my face, when that happened :D Then, years later I was working on a BE-6II board and the same thing happened all over again. Which finally helped me connect all the dots together. Funny though, I never had the similar experience with ANY other board. Regardless of the age, socket (or slot) and brand. Abit sucks ... period!
Abit boards are actually great once you replace the capacitors. Their BIOSes are pretty good (I was surprised to find there's a backup FTP for ABIT) and they OC rather well.
 
Joined
Jul 5, 2013
Messages
25,559 (6.48/day)
Abit boards are actually great once you replace the capacitors. Their BIOSes are pretty good (I was surprised to find there's a backup FTP for ABIT) and they OC rather well.
I think ABit was a victim of the bad-caps thing like everyone else back then, perhaps it just hit them harder.
 
Joined
Jan 1, 2015
Messages
1,800 (0.53/day)
Location
EU
System Name Adison "Open Space" 19
Processor Intel Pentium II, 350MHz
Motherboard Chaintech 6BTM, Slot 1
Cooling SECC Cartridge
Memory 1x 64MB, PC100
Video Card(s) ATI Rage IIc AGP, Diamond Monster 3DII 12MB
Storage BTC BCD-40XH, Quantum Fireball 3.5 Series, EX6.4 GB
Display(s) LG StudioWorks 57M
Case Adison Midi Tower, ATX
Audio Device(s) Creative SoundBlaster 128
Power Supply Codegen 300W
Mouse Genius SlimStar 110, PS/2
Keyboard Genius SlimStar 110, PS/2
Software Microsoft Windows 98
Yeah, it is. They also sell under the Maxsun brand, and they've been making some awesome boards for the recent chipsets. (such as B350)


Abit boards are actually great once you replace the capacitors. Their BIOSes are pretty good (I was surprised to find there's a backup FTP for ABIT) and they OC rather well.
Right, I get that. But what good (or use) of a motherboard if it isn't going to last for years and years (without investing a lot of time, money and/or effort) into it? I had several Abit boards. BE-6, BE-6II, VH6 & others, ALL sharing the one thing in common - bad caps and serious problems!

Here's the previously-mentioned VH6 board (along with one of the BE-6II systems), I did my best to patch it up, but for some reason I never worked out the issue & eventually scrapped it, replacing the board with another brand.


See what I'm talking about?


I do have to point out however, that not all Abit boards seem to have the same issues. This AB-BH6 for example never had any problems... It only proves that miracles do happen from time to time :)
 
Joined
Jul 3, 2016
Messages
758 (0.27/day)
Flea market day today! 5 EUROS for the LOT!

1. Celeron (Tualatin) 1000A/256/100 1GHz SL5ZF
2. Celeron (Coppermine-128) 800/128/100 800MHz SL55R
3. Pentium III 1GHz/256/133 SL52R
4. Misc stuff - SST BIOS chip / RAM levers
5. Asus P4B533-E v1.02 (a few scratches on the back but nothing terminal)+ Cooler + Pentium 4 2.4GHz/512/533 - SL6DV
6. Pentium II - 266/66/512- 266MHz - SL2HE

WIN! WIN! WIN! :D
 

Attachments

  • PRW-FM19-25.jpg
    PRW-FM19-25.jpg
    2 MB · Views: 155
  • PRW-FM19-26.jpg
    PRW-FM19-26.jpg
    2.7 MB · Views: 199
  • PRW-FM19-27.jpg
    PRW-FM19-27.jpg
    666 KB · Views: 202
  • PRW-FM19-28.jpg
    PRW-FM19-28.jpg
    585.1 KB · Views: 156
Joined
Jan 1, 2015
Messages
1,800 (0.53/day)
Location
EU
System Name Adison "Open Space" 19
Processor Intel Pentium II, 350MHz
Motherboard Chaintech 6BTM, Slot 1
Cooling SECC Cartridge
Memory 1x 64MB, PC100
Video Card(s) ATI Rage IIc AGP, Diamond Monster 3DII 12MB
Storage BTC BCD-40XH, Quantum Fireball 3.5 Series, EX6.4 GB
Display(s) LG StudioWorks 57M
Case Adison Midi Tower, ATX
Audio Device(s) Creative SoundBlaster 128
Power Supply Codegen 300W
Mouse Genius SlimStar 110, PS/2
Keyboard Genius SlimStar 110, PS/2
Software Microsoft Windows 98
Taking a closer look at @Robert B 's pics & I've noticed that Pentium II cartridge came with retention frame, or bracket, whatever you want to call it. I seriously hope that it was properly unscrewed & not yanked off the motherboard...? :fear:

You'd be surprised how many of those ended up broken, bent and/or permanently removed (and lost) due to mishandling Slot-1 motherboards. Some brands were more clever than other ones, so Chaintech (6BTM) for example introduced a foldable frame, which can be folded horizontally when you more or store the board.
 
Joined
Jan 16, 2014
Messages
747 (0.20/day)
Location
Bacau, Romania
System Name Star Platinum
Processor Intel Core i5-3470 3.20GHz
Motherboard Gigabyte B75M-D3H
Cooling EKL
Memory 16GB DDR3-1600
Video Card(s) Gigabyte GTX650 1GB GDDR5
Storage 2x Seagate ST31000340NS 1TB SATA II
Display(s) Samsung 32 inch
Case Delux MG760
Audio Device(s) Realtek High Definition Audio + X-Fi XtremeGamer SB0730
Power Supply FSP Bluestorm II 500W
Mouse Marvo KM400 Mouse
Keyboard Marvo KM400 keyboard
Software Windows 10 Enterprise LTSC 1809
You'd be surprised how many of those ended up broken, bent and/or permanently removed (and lost) due to mishandling Slot-1 motherboards. Some brands were more clever than other ones, so Chaintech (6BTM) for example introduced a foldable frame, which can be folded horizontally when you more or store the board.

I think most boards came with foldable. I know that Jetway, Soyo and Acorp do come with foldable ones. A few exceptions I've had were an ASUS P2B and a P2L97, which had a non-foldable frame, but it compensated that by using screws instead of plastic push pins
 
Joined
Jul 3, 2016
Messages
758 (0.27/day)
The CPU came from an ACER V66LA motherboard. The motherboard was banged up and incomplete so I took what I needed and I left it behind.

I removed the CPU from the retention bracket. :) It was put like that during transport. The CPU has a temperature sensor in the middle of the heatsink and a proprietary cable plug. I can mount a new fan or use the old one so this is no biggie.
 

Attachments

  • PRW-FM19-29.jpg
    PRW-FM19-29.jpg
    2.2 MB · Views: 189
Joined
Mar 26, 2010
Messages
9,784 (1.90/day)
Location
Jakarta, Indonesia
System Name micropage7
Processor Intel Xeon X3470
Motherboard Gigabyte Technology Co. Ltd. P55A-UD3R (Socket 1156)
Cooling Enermax ETS-T40F
Memory Samsung 8.00GB Dual-Channel DDR3
Video Card(s) NVIDIA Quadro FX 1800
Storage V-GEN03AS18EU120GB, Seagate 2 x 1TB and Seagate 4TB
Display(s) Samsung 21 inch LCD Wide Screen
Case Icute Super 18
Audio Device(s) Auzentech X-Fi Forte
Power Supply Silverstone 600 Watt
Mouse Logitech G502
Keyboard Sades Excalibur + Taihao keycaps
Software Win 7 64-bit
Benchmark Scores Classified
Joined
Jan 1, 2015
Messages
1,800 (0.53/day)
Location
EU
System Name Adison "Open Space" 19
Processor Intel Pentium II, 350MHz
Motherboard Chaintech 6BTM, Slot 1
Cooling SECC Cartridge
Memory 1x 64MB, PC100
Video Card(s) ATI Rage IIc AGP, Diamond Monster 3DII 12MB
Storage BTC BCD-40XH, Quantum Fireball 3.5 Series, EX6.4 GB
Display(s) LG StudioWorks 57M
Case Adison Midi Tower, ATX
Audio Device(s) Creative SoundBlaster 128
Power Supply Codegen 300W
Mouse Genius SlimStar 110, PS/2
Keyboard Genius SlimStar 110, PS/2
Software Microsoft Windows 98
I think most boards came with foldable. I know that Jetway, Soyo and Acorp do come with foldable ones. A few exceptions I've had were an ASUS P2B and a P2L97, which had a non-foldable frame, but it compensated that by using screws instead of plastic push pins
Interesting... :wtf:

My experience was completely opposite. From all the Slot-1 systems in my collection, only one or two (QDI Advance, Chaintech 6BTM) had foldable frame. In fact, most of them had a fixed frame, made from a single piece of plastic (rather than two sides, each one bolted separately), which often resulted with damage on these things. In fact, I've managed to find & stack quite a few of these, just in case.

Because quite often, when I stumble upon Slot-1 board it is missing the frame and/or it needs replacing. Either partial replacement, or entire, which depends on design & brand. In fact, Abit BE-6II was one of them, I clearly remember replacing one side of the frame on 6II board.
 
Joined
Jul 5, 2013
Messages
25,559 (6.48/day)
The CPU came from an ACER V66LA motherboard. The motherboard was banged up and incomplete so I took what I needed and I left it behind.

I removed the CPU from the retention bracket. :) It was put like that during transport. The CPU has a temperature sensor in the middle of the heatsink and a proprietary cable plug. I can mount a new fan or use the old one so this is no biggie.
The picture in that post seems to have the heatsink mounted the wrong way. Would not fit into the slot like that. Flip it around and you should be good.
 
Joined
Jul 3, 2016
Messages
758 (0.27/day)
Someone has eagle eyes! :D That detail went under the radar. :D

It fits like a glove in the slot. :D I also had a Slot A CPU that had that exact "problem". To be exact, the metalic clips are mounted "wrong" (the other way arround). While in certain situations the ends can interfere with some components, in this instance they cleared the motherboard. That CPU didnt look to be touched for over 21 years so I'm sure it came like that from factory.

To be safe I'll mount the clips in the "correct" way.

The heatsink has some prongs that dont allow to be mounted the other way arround. That heatsink will not be removed as it is not budging and I dont want to warp it. :D I dont need headaches. :D

It is untested but I'm 100% sure it works. That stuff is bulletproof. I've yet to find a dead slot 1 or A CPU. It will be needed to be treaded over by a tank and then maybe I'll ask myself if it works or not. :D

A pic I found in the Internet. http://lileenchantee.blog40.fc2.com/blog-date-201108.html
 

Attachments

  • DSCF5879.jpg
    DSCF5879.jpg
    187 KB · Views: 150
Last edited:
Joined
Oct 15, 2017
Messages
106 (0.04/day)
Location
Czech Republic
Processor Ryzen 9 5900X
Motherboard Asus Prime X570-P
Cooling Scythe Ninja 4
Memory 32 GB DDR4 3000 CL14 (Corsair)
Video Card(s) Gainward RTX 3080 @ 1620 MHz @ 0.7V
Storage Crucial MX500 500 GB, SanDisk 3.84 TB SSD, Toshiba X300 6 TB
Display(s) Acer XF270HU, Philips 252B9
Case Corsair Carbide 300R
Audio Device(s) Asus Xonar DX
Power Supply Corsair RM850i
Mouse Logitech G604
Keyboard Cherry Stream 3.0
Software Windows 10 x64
Anyone remember the ultimate leaf blower? :-D

GeForce4 Ti4600 vs GeForce FX 5800 Ultra
 
Joined
May 9, 2012
Messages
8,405 (1.93/day)
Location
Ovronnaz, Wallis, Switzerland
System Name main/SFFHTPCARGH!(tm)/Xiaomi Mi TV Stick/Samsung Galaxy S23/Ally
Processor Ryzen 7 5800X3D/i7-3770/S905X/Snapdragon 8 Gen 2/Ryzen Z1 Extreme
Motherboard MSI MAG B550 Tomahawk/HP SFF Q77 Express/uh?/uh?/Asus
Cooling Enermax ETS-T50 Axe aRGB /basic HP HSF /errr.../oh! liqui..wait, no:sizable vapor chamber/a nice one
Memory 64gb Corsair Vengeance Pro 3600mhz DDR4/8gb DDR3 1600/2gb LPDDR3/8gb LPDDR5x 4200/16gb LPDDR5
Video Card(s) Hellhound Spectral White RX 7900 XTX 24gb/GT 730/Mali 450MP5/Adreno 740/RDNA3 768 core
Storage 250gb870EVO/500gb860EVO/2tbSandisk/NVMe2tb+1tb/4tbextreme V2/1TB Arion/500gb/8gb/256gb/2tb SN770M
Display(s) X58222 32" 2880x1620/32"FHDTV/273E3LHSB 27" 1920x1080/6.67"/AMOLED 2X panel FHD+120hz/FHD 120hz
Case Cougar Panzer Max/Elite 8300 SFF/None/back/back-front Gorilla Glass Victus 2+ UAG Monarch Carbon
Audio Device(s) Logi Z333/SB Audigy RX/HDMI/HDMI/Dolby Atmos/KZ x HBB PR2/Edifier STAX Spirit S3 & SamsungxAKG beans
Power Supply Chieftec Proton BDF-1000C /HP 240w/12v 1.5A/4Smart Voltplug PD 30W/Asus USB-C 65W
Mouse Speedlink Sovos Vertical-Asus ROG Spatha-Logi Ergo M575/Xiaomi XMRM-006/touch/touch
Keyboard Endorfy Thock 75% <3/none/touch/virtual
VR HMD Medion Erazer
Software Win10 64/Win8.1 64/Android TV 8.1/Android 13/Win11 64
Benchmark Scores bench...mark? i do leave mark on bench sometime, to remember which one is the most comfortable. :o
The CPU came from an ACER V66LA motherboard. The motherboard was banged up and incomplete so I took what I needed and I left it behind.

I removed the CPU from the retention bracket. :) It was put like that during transport. The CPU has a temperature sensor in the middle of the heatsink and a proprietary cable plug. I can mount a new fan or use the old one so this is no biggie.
one of the beauty in my collection is a V66LT 4MB from a Veriton AIO
IMG_20190908_201323_1.jpgIMG_20190908_201315.jpg

all caps in pristine condition board too, the 13.3" screen was busted but everything else worked ... ESS Solo-1 ahah i remember that one ...
IMG_20190908_201406.jpgIMG_20190908_201410_1.jpgIMG_20190908_201417.jpg

DIP switches fun and BX AGP set ( well the AGP "card" is integrated ... only 1 PCI/2PCI with riser as expansion ) the only annoying thing ... is the PSU connector :laugh: luckily the PSU was also perfectly working
IMG_20190908_201337.jpgIMG_20190908_201431.jpg

i already posted some pics of the thing installing and running WinXP back

yep :
1567967638659.png1567967684074.png1567968255945.png
1567967732954.png

forgot, the CPU that was in :
IMG_20190908_202908.jpgIMG_20190908_202913.jpgIMG_20190908_202917_1.jpg
 
Last edited:
Top