• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Bricked RX580 POWERCOLOR REDDRAGON

Bashdar09

New Member
Joined
May 15, 2020
Messages
25 (0.01/day)
So i decided to force flash my rx580 to a lower clock and lower fan curve becuase its too damn loud and hot. i used CMD command line to do it with ati flash i flashed it with a rx580 dell bios one ( I know im stupid ) and now it won`t even boot to the motherboard.
Reminder i flashed the backup one cuz these cards have 2 bioses primary and backup i did not check the switch before flashing.

Is there a way to bring it back with PCI-e card dos method or in windows ? i don`t have apu laying around .

in case you are wondring why i flashed it with a different model . it worked with sapphire nitro + bios without any problems
 
Last edited:
 
ummmm .....yeah........
 
So i decided to force flash my rx580 to a lower clock and lower fan curve becuase its too damn loud and hot. i used CMD command line to do it with ati flash i flashed it with a rx580 dell bios one ( I know im stupid ) and now it won`t even boot to the motherboard.
Reminder i flashed the backup one cuz these cards have 2 bioses primary and backup i did not check the switch before flashing.

Is there a way to bring it back with PCI-e card dos method or in windows ? i don`t have apu laying around .

in case you are wondring why i flashed it with a different model . it worked with sapphire nitro + bios without any problems
have you got a bios switch on your 580? so worked with Sapphire Nitro and you just decided that you werent satisfied enough and decided to see how you could brick it one more time?

switch to working bios, post GPUz screenshot
 
Yes, try looking for a small switch on top the card. Near the PCIe power adapter, or above the outputs.

If you can't find it, or doesn't work, take off the cooler, and check the exact model of the card and memory chips installed on that card.

PowerColor RX 580 Red Dragon 8GB normally runs at 1350 / 2000, check the databases here and here.

If however, you have the 4GB version, this one runs at 1350 / 1750, and you should check this database instead.

Make sure the memory chip is listed in "Memory Support".
 
have you got a bios switch on your 580? so worked with Sapphire Nitro and you just decided that you werent satisfied enough and decided to see how you could brick it one more time?

switch to working bios, post GPUz screenshot
yes will do

Yes, try looking for a small switch on top the card. Near the PCIe power adapter, or above the outputs.

If you can't find it, or doesn't work, take off the cooler, and check the exact model of the card and memory chips installed on that card.

PowerColor RX 580 Red Dragon 8GB normally runs at 1350 / 2000, check the databases here and here.

If however, you have the 4GB version, this one runs at 1350 / 1750, and you should check this database instead.

Make sure the memory chip is listed in "Memory Support".
I know sir i have the backup rom .. i meant by backup in the thread to that switch that i fu*ked up

thanks m8 ordered a PCI-e card
 
Don't you have onboard graphics? IGD? APU? old graphics card laying around? You can try the 1-8 pin, maybe the card can still POST.
 
Don't you have onboard graphics? IGD? APU? old graphics card laying around? You can try the 1-8 pin, maybe the card can still POST.
No i don`t have an APU .. I can`t find bios chip there are 5 chips that i suspect its bios ( 1 GS710, 2 GS7256, 2 2502ASTIG 1751)
 
Back
Top