• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Are these good temps for my CPU?

Joined
May 5, 2020
Messages
58 (0.04/day)
I have a i7-8700, Thermaltake UX200 ARGB cpu cooler with MX-4 thermal paste, Z390 Aorus Pro motherboard, be quiet! Pure Base 500DX case, with 3 Pure Wings 140mm PWM High-Speed fans, one at the rear, two front intakes, and I left one of the stock fans (non-PWM) to run on the top.

My temps in Prime95 sit around 63-66C, after letting AIDA64 Stability Test run overnight I noticed that the CPU max temps reached 78C on some cores, but not any more above that. The CPU didn't throttle at all, always running at all cores 4.3 GHz, as it should. Every other piece of hardware performed as it should.

During gaming I have 55-65C, in GTA V as a point of reference, whereas before on the pre-built I had 72C+ in GTA V. In some games, the CPU load can be 50% yet the temps stay below 50C.

I also tried Minecraft Bedrock which liked to spike my CPU temps in the 70's when I changed render distance. I changed the render distance to the max on this build, with full antialiasing and particle render distance, and it remained between 60-65C.

I'm concerned if these temps are good or not because my cooler is sagging by about 2-3mm, however it looks like it makes contact with the IHS perfectly and the motherboard isn't bent. Are these temps okay and should I stop worrying and carry on with my new build?
 
Joined
Aug 25, 2015
Messages
185 (0.06/day)
Location
Denmark
System Name Red Bandit
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS PRIME X670E-PRO WIFI
Cooling Mo-Ra3 420 W/4x Noctua NF-A20S - 2xD5's/1xDDC 4.2
Memory G.SKILL Trident Z5 NEO EXPO 6000CL30/3000/2000
Video Card(s) GIGABYTE RX 6900 XT Ultimate Xtreme WaterForce WB 16GB
Storage Adata SX8200 PRO 2TB x 2
Display(s) Samsung Odyssey G7 32" 240HZ
Case Jonsbo D41 Mesh/Screen
Audio Device(s) Logitech Pro X Wireless
Power Supply Corsair RM1000e v2 ATX 3.0
Mouse Logitech G502 Hero
Keyboard Corsair K70 MX RED Low profile
Software W11 Pro
They are completly fine , nothing to worry about
 
Joined
May 5, 2020
Messages
58 (0.04/day)
They are completly fine , nothing to worry about
So the 2-3mm CPU cooler sag isn't an issue then? Board doesn't seem to flex at all with it sagging like that, it only flexes when I push the cooler up very slightly. It's mounted properly too so I have no idea.

I really don't wanna go through wasting more thermal compound wipes and paste reseating it just to find it still sagging.
 
Joined
Nov 24, 2018
Messages
2,109 (1.07/day)
Location
south wales uk
System Name 1.FortySe7en VR rig 2. intel teliscope rig 3.MSI GP72MVR Leopard Pro .E-52699, Xeon play thing
Processor 1.3900x @stock 2. i7 7700k @5. 3. i7 7700hq
Motherboard 1.aorus x570 ultra 2. z270 Maximus IX Hero,4 MR9A PRO ATX X99
Cooling 1.Hard tube loop, cpu and gpu 2. Hard loop cpu and gpu 4 360 AIO
Memory 1.Gskill neo @3600 32gb 2.hyperxfury 32gb @3000 3. 16gb hyperx @2400 4 64GB 2133 in quad channel
Video Card(s) 1.GIGABYTE RTX 3080 WaterForce WB 2. Aorus RTX2080 3. 1060 3gb. 4 Arc 770LE 16 gb
Storage 1 M.2 500gb , 2 3tb HDs 2. 256gb ssd, 3tbHD 3. 256 m.2. 1tb ssd 4. 2gb ssd
Display(s) 1.LG 50" UHD , 2 MSI Optix MAG342C UWHD. 3.17" 120 hz display 4. Acer Preditor 144hz 32inch.z
Case 1. Thermaltake P5 2. Thermaltake P3 4. some cheapo case that should not be named.
Audio Device(s) 1 Onboard 2 Onboard 3 Onboard 4. onboard.
Power Supply 1.seasonic gx 850w 2. seasonic gx 750w. 4 RM850w
Mouse 1 ROG Gladius 2 Corsair m65 pro
Keyboard 1. ROG Strix Flare 2. Corsair F75 RBG 3. steelseries RBG
VR HMD rift and rift S and Quest 2.
Software 1. win11 pro 2. win11 pro 3, win11 home 4 win11 pro
Benchmark Scores 1.7821 cb20 ,cb15 3442 1c 204 cpu-z 1c 539 12c 8847 2. 1106 cb 3.cb 970
id be happy with those temps mate, leave as is the coolers working well.
 
Joined
May 5, 2020
Messages
58 (0.04/day)
id be happy with those temps mate, leave as is the coolers working well.
So I'm guessing this is another one of those times I'm just being stupid paranoid over a change to my PC. This time a big change as I've never built a PC before, only got pre-builts. I just need reassurance -- if I leave the cooler sagging like that (barely a noticeable sag but I like to notice small things like an idiot) it won't have any long term damage on my motherboard for example? The motherboard is not flexing or bending with the cooler sagging (as it should, the mobo was $200).
 
Joined
Aug 25, 2015
Messages
185 (0.06/day)
Location
Denmark
System Name Red Bandit
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS PRIME X670E-PRO WIFI
Cooling Mo-Ra3 420 W/4x Noctua NF-A20S - 2xD5's/1xDDC 4.2
Memory G.SKILL Trident Z5 NEO EXPO 6000CL30/3000/2000
Video Card(s) GIGABYTE RX 6900 XT Ultimate Xtreme WaterForce WB 16GB
Storage Adata SX8200 PRO 2TB x 2
Display(s) Samsung Odyssey G7 32" 240HZ
Case Jonsbo D41 Mesh/Screen
Audio Device(s) Logitech Pro X Wireless
Power Supply Corsair RM1000e v2 ATX 3.0
Mouse Logitech G502 Hero
Keyboard Corsair K70 MX RED Low profile
Software W11 Pro
So I'm guessing this is another one of those times I'm just being stupid paranoid over a change to my PC. This time a big change as I've never built a PC before, only got pre-builts. I just need reassurance -- if I leave the cooler sagging like that (barely a noticeable sag but I like to notice small things like an idiot) it won't have any long term damage on my motherboard for example? The motherboard is not flexing or bending with the cooler sagging (as it should, the mobo was $200).

Pretty much mate. Remember that 8000 series is using paste between die and ihs. So thermals are very good imho
 
Joined
May 5, 2020
Messages
58 (0.04/day)
Pretty much mate. Remember that 8000 series is using paste between die and ihs. So thermals are very good imho
That MX-4 paste I applied should last a while then...

Alright, guess I'll have to get used to it looking like that. Gonna take me a few weeks... as is with every hardware change lol.
 
Joined
Nov 24, 2018
Messages
2,109 (1.07/day)
Location
south wales uk
System Name 1.FortySe7en VR rig 2. intel teliscope rig 3.MSI GP72MVR Leopard Pro .E-52699, Xeon play thing
Processor 1.3900x @stock 2. i7 7700k @5. 3. i7 7700hq
Motherboard 1.aorus x570 ultra 2. z270 Maximus IX Hero,4 MR9A PRO ATX X99
Cooling 1.Hard tube loop, cpu and gpu 2. Hard loop cpu and gpu 4 360 AIO
Memory 1.Gskill neo @3600 32gb 2.hyperxfury 32gb @3000 3. 16gb hyperx @2400 4 64GB 2133 in quad channel
Video Card(s) 1.GIGABYTE RTX 3080 WaterForce WB 2. Aorus RTX2080 3. 1060 3gb. 4 Arc 770LE 16 gb
Storage 1 M.2 500gb , 2 3tb HDs 2. 256gb ssd, 3tbHD 3. 256 m.2. 1tb ssd 4. 2gb ssd
Display(s) 1.LG 50" UHD , 2 MSI Optix MAG342C UWHD. 3.17" 120 hz display 4. Acer Preditor 144hz 32inch.z
Case 1. Thermaltake P5 2. Thermaltake P3 4. some cheapo case that should not be named.
Audio Device(s) 1 Onboard 2 Onboard 3 Onboard 4. onboard.
Power Supply 1.seasonic gx 850w 2. seasonic gx 750w. 4 RM850w
Mouse 1 ROG Gladius 2 Corsair m65 pro
Keyboard 1. ROG Strix Flare 2. Corsair F75 RBG 3. steelseries RBG
VR HMD rift and rift S and Quest 2.
Software 1. win11 pro 2. win11 pro 3, win11 home 4 win11 pro
Benchmark Scores 1.7821 cb20 ,cb15 3442 1c 204 cpu-z 1c 539 12c 8847 2. 1106 cb 3.cb 970
it really down to how you yourself see the sagging, me it wouldnt bother me in the slightest just as long as the temps are ok which thay are, its just the way big coolers hang :)
 
Joined
May 5, 2020
Messages
58 (0.04/day)
it really down to how you yourself see the sagging, me it wouldnt bother me in the slightest just as long as the temps are ok which thay are, its just the way big coolers hang :)
Yeah it tends to bother me. But if my temps remain good, I can get used to it. Just wanted to make sure I'm not damaging my motherboard leaving it like that.
It has a pushpin mount after all... not exactly the most premium mounting mechanism.
 
Last edited:
Joined
Jul 2, 2008
Messages
8,069 (1.40/day)
Location
Hillsboro, OR
System Name Main/DC
Processor i7-3770K/i7-2600K
Motherboard MSI Z77A-GD55/GA-P67A-UD4-B3
Cooling Phanteks PH-TC14CS/H80
Memory Crucial Ballistix Sport 16GB (2 x 8GB) LP /4GB Kingston DDR3 1600
Video Card(s) Asus GTX 660 Ti/MSI HD7770
Storage Crucial MX100 256GB/120GB Samsung 830 & Seagate 2TB(died)
Display(s) Asus 24' LED/Samsung SyncMaster B1940
Case P100/Antec P280 It's huge!
Audio Device(s) on board
Power Supply SeaSonic SS-660XP2/Seasonic SS-760XP2
Software Win 7 Home Premiun 64 Bit
Joined
May 5, 2020
Messages
58 (0.04/day)
Joined
Jul 2, 2008
Messages
8,069 (1.40/day)
Location
Hillsboro, OR
System Name Main/DC
Processor i7-3770K/i7-2600K
Motherboard MSI Z77A-GD55/GA-P67A-UD4-B3
Cooling Phanteks PH-TC14CS/H80
Memory Crucial Ballistix Sport 16GB (2 x 8GB) LP /4GB Kingston DDR3 1600
Video Card(s) Asus GTX 660 Ti/MSI HD7770
Storage Crucial MX100 256GB/120GB Samsung 830 & Seagate 2TB(died)
Display(s) Asus 24' LED/Samsung SyncMaster B1940
Case P100/Antec P280 It's huge!
Audio Device(s) on board
Power Supply SeaSonic SS-660XP2/Seasonic SS-760XP2
Software Win 7 Home Premiun 64 Bit
Top