Hi guys i have been trying to get answers everywhere and im desperate for them. Im building my own pc and i purchased a case from an official store in my country. My worst mistake is that i never looked about it other than the site description which is limited and realised that the case literarily doesnt exist on the internet. Now i want to buy https://www.msi.com/Motherboard/B450M-PRO-M2-MAX/Specification and the case is https://www.emmi.rs/kuciste-falcon-zeus-window-rgb-fcr15zbw.html . It came with 4 rgb fans that have(listen to me well) 1 3pin female connector and 2 wires coming of it and going into 1st and 2nd pin of molex(all of this is for 1 fan...there are 4). I know that the molex is for power but with 100% spin and i know that the 3 pin is for power too and it can regulate speed when i enable DC mode in my mb's BIOS. So can u tell me if i should use both molex and 3 pin or just one. And can 1 4pin fan hub support 4 fans and then go into System fan slot on MB (i mean can it provide enough Ampers) and will it be able to regulate speed with DC mode enabled(if u dont believe me on that DC mode u can check manual page 14 for MB). Please if u dont understand me i can explain better...or send pictures.
Thanks in advance!
Thanks in advance!