• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Computer is locking leaving standby...

Joined
Dec 5, 2006
Messages
7,704 (1.21/day)
System Name Back to Blue
Processor i9 14900k
Motherboard Asrock Z790 Nova
Cooling Corsair H150i Elite
Memory 64GB Corsair Dominator DDR5-6400 @ 6600
Video Card(s) EVGA RTX 3090 Ultra FTW3
Storage 4TB WD 850x NVME, 4TB WD Black, 10TB Seagate Barracuda Pro
Display(s) 1x Samsung Odyssey G7 Neo and 1x Dell u2518d
Case Lian Li o11 DXL w/custom vented front panel
Audio Device(s) Focusrite Saffire PRO 14 -> DBX DriveRack PA+ -> Mackie MR8 and MR10 / Senn PX38X -> SB AE-5 Plus
Power Supply Corsair RM1000i
Mouse Logitech G502x
Keyboard Corsair K95 Platinum
Software Windows 11 x64 Pro
Benchmark Scores 31k multicore Cinebench - CPU limited 125w
Out of the blue one of my systems started locking up resuming from standby, not hibernation.

Anyways it didn't do it before and now its locking up so hard that holding the power button doesn't work, and to even get it to start again I have to pull the cmos battery out and put it back in.

Not sure whats going on here, but its driving me nuts!

Any ideas?
*Besides the obvious turn off standby*
System-
Asus P5Ld2
E6420
*Mainboard might be bad somewhere?*

I also turned off ALL thermal control and the voltage is a nice steady 1.3 so its not a lack of power. Power supply checks all good and is more than plenty large enough for the system.
 

Namslas90

New Member
Joined
Aug 27, 2006
Messages
4,846 (0.75/day)
Location
Earth
Ram might have gone bad, can you get it going at all, look in error logs.
How long did you wait before resetting first time, maybe it was trying to continue an app or something.
I suppose no Beeps?
 
Last edited:
Joined
Dec 5, 2006
Messages
7,704 (1.21/day)
System Name Back to Blue
Processor i9 14900k
Motherboard Asrock Z790 Nova
Cooling Corsair H150i Elite
Memory 64GB Corsair Dominator DDR5-6400 @ 6600
Video Card(s) EVGA RTX 3090 Ultra FTW3
Storage 4TB WD 850x NVME, 4TB WD Black, 10TB Seagate Barracuda Pro
Display(s) 1x Samsung Odyssey G7 Neo and 1x Dell u2518d
Case Lian Li o11 DXL w/custom vented front panel
Audio Device(s) Focusrite Saffire PRO 14 -> DBX DriveRack PA+ -> Mackie MR8 and MR10 / Senn PX38X -> SB AE-5 Plus
Power Supply Corsair RM1000i
Mouse Logitech G502x
Keyboard Corsair K95 Platinum
Software Windows 11 x64 Pro
Benchmark Scores 31k multicore Cinebench - CPU limited 125w
Ram might have gone bad, can you get it going at all, look in error logs.
How long did you wait before resetting, maybe it was trying to continue an app or something.

All apps were closed...

I forgot to check error logs... Duh... Thanks I'll take a look and run a test on ram..

And ya bios says everything is good.
 
Joined
Jan 12, 2007
Messages
2,276 (0.36/day)
Location
Cairns QLD, Aussie
System Name GaMEr / HTPC
Processor FX8320 4.5ghz so far NB- 2815mhz / X2 255 @ 3.2ghz (Temp till BD)
Motherboard 990FX-UD5 / GA-MA785GPMT-US2H
Cooling XSPC - 240rad 480rad 5 x 120mm out, 6 x 80mm in / H220-edge 1/2" & 2 x 120mm Magma
Memory 4gb PI 6,8,6,18 1T 1706mhz / 4gb Crucial D9's 1400 @ 6,6,6,18,1T
Video Card(s) 3gb HD7950 / Onboard
Storage 2 x 120gb Sandisk ultra plus 2tb WD / 60gb vertex 2 + 2 x 2tb WD Greens
Display(s) 3x24in Dell Ultra (portrait) / NEC 32" FullHD LCD
Case LL PC71A Full tower / Antec fusion black with Imon remote Modded for WC
Audio Device(s) OB / Auzentech cinema 7.1
Power Supply TT 700w TR2 / TT 600w Litepower modded with Noctua S12 fan.
Software 7 Ult / 7 premium x64
Like Namslas said, I would probably start with the ram, considering you have 4 sticks label them 1 - 4 with tape and test them 1 at a time....

If they are all good then go 2 at a time.

Other than that have you got your raptors in a Raid.... you may have problems there somewhere with a driver or your raid controller...

Start with the ram though to eliminate it, its the easiest part to test...

And yeah, I would be surprised if it was your psu, seasonic make rock solid supplies..
 
Joined
Dec 5, 2006
Messages
7,704 (1.21/day)
System Name Back to Blue
Processor i9 14900k
Motherboard Asrock Z790 Nova
Cooling Corsair H150i Elite
Memory 64GB Corsair Dominator DDR5-6400 @ 6600
Video Card(s) EVGA RTX 3090 Ultra FTW3
Storage 4TB WD 850x NVME, 4TB WD Black, 10TB Seagate Barracuda Pro
Display(s) 1x Samsung Odyssey G7 Neo and 1x Dell u2518d
Case Lian Li o11 DXL w/custom vented front panel
Audio Device(s) Focusrite Saffire PRO 14 -> DBX DriveRack PA+ -> Mackie MR8 and MR10 / Senn PX38X -> SB AE-5 Plus
Power Supply Corsair RM1000i
Mouse Logitech G502x
Keyboard Corsair K95 Platinum
Software Windows 11 x64 Pro
Benchmark Scores 31k multicore Cinebench - CPU limited 125w
This is not the system in my specs....

I think something is wrong with my mainboard or cmos...

Processor runs great, ram tested fine, hard drives are not in raid and are good....
But I have just now even had it lock up in cmos setup 2 times. Northbridge seems a little warmer than usual but everything is set normal. I'm on that machine now... I am really lost here in whats going on.
 
Joined
Dec 5, 2006
Messages
7,704 (1.21/day)
System Name Back to Blue
Processor i9 14900k
Motherboard Asrock Z790 Nova
Cooling Corsair H150i Elite
Memory 64GB Corsair Dominator DDR5-6400 @ 6600
Video Card(s) EVGA RTX 3090 Ultra FTW3
Storage 4TB WD 850x NVME, 4TB WD Black, 10TB Seagate Barracuda Pro
Display(s) 1x Samsung Odyssey G7 Neo and 1x Dell u2518d
Case Lian Li o11 DXL w/custom vented front panel
Audio Device(s) Focusrite Saffire PRO 14 -> DBX DriveRack PA+ -> Mackie MR8 and MR10 / Senn PX38X -> SB AE-5 Plus
Power Supply Corsair RM1000i
Mouse Logitech G502x
Keyboard Corsair K95 Platinum
Software Windows 11 x64 Pro
Benchmark Scores 31k multicore Cinebench - CPU limited 125w
Now its half locked again... I don't get it... My start bar wont show up.. I can't open anything but this browser is still working fine..
 
Joined
Dec 5, 2006
Messages
7,704 (1.21/day)
System Name Back to Blue
Processor i9 14900k
Motherboard Asrock Z790 Nova
Cooling Corsair H150i Elite
Memory 64GB Corsair Dominator DDR5-6400 @ 6600
Video Card(s) EVGA RTX 3090 Ultra FTW3
Storage 4TB WD 850x NVME, 4TB WD Black, 10TB Seagate Barracuda Pro
Display(s) 1x Samsung Odyssey G7 Neo and 1x Dell u2518d
Case Lian Li o11 DXL w/custom vented front panel
Audio Device(s) Focusrite Saffire PRO 14 -> DBX DriveRack PA+ -> Mackie MR8 and MR10 / Senn PX38X -> SB AE-5 Plus
Power Supply Corsair RM1000i
Mouse Logitech G502x
Keyboard Corsair K95 Platinum
Software Windows 11 x64 Pro
Benchmark Scores 31k multicore Cinebench - CPU limited 125w
Something is wrong with the chipset or voltage regs, the chipset is getting so hot it burnt my finger and blistered it by touching the heatsink, voltages for it were never changed.

RMA'd.
 
Joined
Jul 1, 2005
Messages
5,197 (0.76/day)
Location
Kansas City, KS
System Name Dell XPS 15 9560
Processor I7-7700HQ
Memory 32GB DDR4
Video Card(s) GTX 1050/1080 Ti
Storage 1TB SSD
Display(s) 2x Dell P2715Q/4k Internal
Case Razer Core
Audio Device(s) Creative E5/Objective 2 Amp/Senn HD650
Mouse Logitech Proteus Core
Keyboard Logitech G910
Does it work in linux?

Windows standby/low power support has always been poor.

And its even worse in vista.
 
Joined
Dec 5, 2006
Messages
7,704 (1.21/day)
System Name Back to Blue
Processor i9 14900k
Motherboard Asrock Z790 Nova
Cooling Corsair H150i Elite
Memory 64GB Corsair Dominator DDR5-6400 @ 6600
Video Card(s) EVGA RTX 3090 Ultra FTW3
Storage 4TB WD 850x NVME, 4TB WD Black, 10TB Seagate Barracuda Pro
Display(s) 1x Samsung Odyssey G7 Neo and 1x Dell u2518d
Case Lian Li o11 DXL w/custom vented front panel
Audio Device(s) Focusrite Saffire PRO 14 -> DBX DriveRack PA+ -> Mackie MR8 and MR10 / Senn PX38X -> SB AE-5 Plus
Power Supply Corsair RM1000i
Mouse Logitech G502x
Keyboard Corsair K95 Platinum
Software Windows 11 x64 Pro
Benchmark Scores 31k multicore Cinebench - CPU limited 125w
Does it work in linux?

Windows standby/low power support has always been poor.

And its even worse in vista.

No wont even boot, locked up on me in cmos, and the chipset heatsink got so friggen hot it put a blister on my thump nearly on contact...

Really funny, psu's voltages are perfect, no burning smell, and I checked the thermal paste, its all good.... Got the RMA today, I'll ship it out tomorrow. Probably just going to replace the board and have the new one when it comes laying around.
 
Top