• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Why the overvoltage when run on a rectangular wave UPS

  • Thread starter Deleted member 191766
  • Start date

OneMoar

There is Always Moar
Joined
Apr 9, 2010
Messages
8,740 (1.71/day)
Location
Rochester area
System Name RPC MK2.5
Processor Ryzen 5800x
Motherboard Gigabyte Aorus Pro V2
Cooling Enermax ETX-T50RGB
Memory CL16 BL2K16G36C16U4RL 3600 1:1 micron e-die
Video Card(s) GIGABYTE RTX 3070 Ti GAMING OC
Storage ADATA SX8200PRO NVME 512GB, Intel 545s 500GBSSD, ADATA SU800 SSD, 3TB Spinner
Display(s) LG Ultra Gear 32 1440p 165hz Dell 1440p 75hz
Case Phanteks P300 /w 300A front panel conversion
Audio Device(s) onboard
Power Supply SeaSonic Focus+ Platinum 750W
Mouse Kone burst Pro
Keyboard EVGA Z15
Software Windows 11 +startisallback
because its rectangular wave you sort of answered your own question ........
 
Joined
Oct 8, 2015
Messages
712 (0.23/day)
Location
Earth's Troposphere
System Name 3 "rigs"-gaming/spare pc/cruncher
Processor R7-5800X3D/i7-7700K/R9-7950X
Motherboard Asus ROG Crosshair VI Extreme/Asus Ranger Z170/Asus ROG Crosshair X670E-GENE
Cooling Bitspower monoblock ,custom open loop,both passive and active/air tower cooler/air tower cooler
Memory 32GB DDR4/32GB DDR4/64GB DDR5
Video Card(s) Gigabyte RX6900XT Alphacooled/AMD RX5700XT 50th Aniv./SOC(onboard)
Storage mix of sata ssds/m.2 ssds/mix of sata ssds+an m.2 ssd
Display(s) Dell UltraSharp U2410 , HP 24x
Case mb box/Silverstone Raven RV-05/CoolerMaster Q300L
Audio Device(s) onboard/onboard/onboard
Power Supply 3 Seasonics, a DeltaElectronics, a FractalDesing
Mouse various/various/various
Keyboard various wired and wireless
VR HMD -
Software W10.someting or another,all 3
Aren't them all rectangular wave? Yes them are.
 
Joined
Aug 20, 2007
Messages
20,709 (3.41/day)
System Name Pioneer
Processor Ryzen R9 7950X
Motherboard GIGABYTE Aorus Elite X670 AX
Cooling Noctua NH-D15 + A whole lotta Sunon and Corsair Maglev blower fans...
Memory 64GB (4x 16GB) G.Skill Flare X5 @ DDR5-6000 CL30
Video Card(s) XFX RX 7900 XTX Speedster Merc 310
Storage 2x Crucial P5 Plus 2TB PCIe 4.0 NVMe SSDs
Display(s) 55" LG 55" B9 OLED 4K Display
Case Thermaltake Core X31
Audio Device(s) TOSLINK->Schiit Modi MB->Asgard 2 DAC Amp->AKG Pro K712 Headphones or HDMI->B9 OLED
Power Supply FSP Hydro Ti Pro 850W
Mouse Logitech G305 Lightspeed Wireless
Keyboard WASD Code v3 with Cherry Green keyswitches
Software Windows 11 Enterprise (legit), Gentoo Linux x64
Joined
Aug 20, 2007
Messages
20,709 (3.41/day)
System Name Pioneer
Processor Ryzen R9 7950X
Motherboard GIGABYTE Aorus Elite X670 AX
Cooling Noctua NH-D15 + A whole lotta Sunon and Corsair Maglev blower fans...
Memory 64GB (4x 16GB) G.Skill Flare X5 @ DDR5-6000 CL30
Video Card(s) XFX RX 7900 XTX Speedster Merc 310
Storage 2x Crucial P5 Plus 2TB PCIe 4.0 NVMe SSDs
Display(s) 55" LG 55" B9 OLED 4K Display
Case Thermaltake Core X31
Audio Device(s) TOSLINK->Schiit Modi MB->Asgard 2 DAC Amp->AKG Pro K712 Headphones or HDMI->B9 OLED
Power Supply FSP Hydro Ti Pro 850W
Mouse Logitech G305 Lightspeed Wireless
Keyboard WASD Code v3 with Cherry Green keyswitches
Software Windows 11 Enterprise (legit), Gentoo Linux x64
Joined
Jul 25, 2006
Messages
12,011 (1.86/day)
Location
Nebraska, USA
System Name Brightworks Systems BWS-6 E-IV
Processor Intel Core i5-6600 @ 3.9GHz
Motherboard Gigabyte GA-Z170-HD3 Rev 1.0
Cooling Quality case, 2 x Fractal Design 140mm fans, stock CPU HSF
Memory 32GB (4 x 8GB) DDR4 3000 Corsair Vengeance
Video Card(s) EVGA GEForce GTX 1050Ti 4Gb GDDR5
Storage Samsung 850 Pro 256GB SSD, Samsung 860 Evo 500GB SSD
Display(s) Samsung S24E650BW LED x 2
Case Fractal Design Define R4
Power Supply EVGA Supernova 550W G2 Gold
Mouse Logitech M190
Keyboard Microsoft Wireless Comfort 5050
Software W10 Pro 64-bit
Aren't them all rectangular wave? Yes them are.
No, not at all. As 10 seconds with Bing Google would show.

BTW, I am not following that digilander link. My security apps don't like it.

And FTR, they are not rectangular. Nor are they square. As R-T-B notes, they are either pure sine wave or stepped, typically called simulated, modified or stepped approximation wave forms.

But WHY is this happening
Did you try Bing Google? It really is amazing what folks can learn and how quickly (much faster than waiting for a forum reply) they could learn for themselves if they just took a few seconds to type their questions in their favorite search engines. Others include DuckDuckGo, dogpile, Yahoo and others.

These search engines are great to verify what we think we know before posting inaccurate information too. I highly recommend them.

***

Batteries output DC. AC power supplies don't run on DC. So the voltages need to be inverted and turned into AC. That is not easy (or cheap) because a simple inverter does not provide a clean enough wave form so it has to be simulated or stepped and that takes more processes.

Think of a digital image. Curves are not really curved. They are jagged little steps. As the steps get smaller, the more the curve looks like a real curve, but they are still stepped.

See https://www.kstar.com/indexproblem/...n't really a sine wave, modified or otherwise.

Fortunately, power supplies are easily capable of dealing with stepped approximation wave forms - and have for decades. Don't let anyone try to convince you that you must go with a "pure sinewave" output UPS. There is a lot of marketing "hype" out there claiming pure sinewave UPS are better and a lot of hype claiming active PFC power supplies need pure sinewave power. That is pure marketing hogwash! Don't fall for it! That's all it is, marketing hype by those companies who make pure sinewave UPS trying to take the market share away from APC, who sells mostly "stepped approximation" output UPS.

Any 1/2 way decent AC/DC power supply can handle the "stepped sine wave" or "stepped approximation" waveform just fine. They have for the last 25+ years with no problems so there is no reason to believe the much more reliable and robust power supplies of today can't either. They are much more capable at handling power line anomalies than PSUs of yesteryear.

And that's not just computer PSUs, but the power supplies for our modems, routers, switches, monitors and more. The only time there really is a need for a "pure" sine wave output UPS is when used to support highly critical and sensitive health monitoring and life support equipment as found in hospital intensive care units.
 
Joined
Aug 20, 2007
Messages
20,709 (3.41/day)
System Name Pioneer
Processor Ryzen R9 7950X
Motherboard GIGABYTE Aorus Elite X670 AX
Cooling Noctua NH-D15 + A whole lotta Sunon and Corsair Maglev blower fans...
Memory 64GB (4x 16GB) G.Skill Flare X5 @ DDR5-6000 CL30
Video Card(s) XFX RX 7900 XTX Speedster Merc 310
Storage 2x Crucial P5 Plus 2TB PCIe 4.0 NVMe SSDs
Display(s) 55" LG 55" B9 OLED 4K Display
Case Thermaltake Core X31
Audio Device(s) TOSLINK->Schiit Modi MB->Asgard 2 DAC Amp->AKG Pro K712 Headphones or HDMI->B9 OLED
Power Supply FSP Hydro Ti Pro 850W
Mouse Logitech G305 Lightspeed Wireless
Keyboard WASD Code v3 with Cherry Green keyswitches
Software Windows 11 Enterprise (legit), Gentoo Linux x64
Heck, I ran AC fan motors in the past on my tripplites stepped sine wave. Other than a small RPM reduction, even they had no issue, and motors are technically the place you should see it most.

I have seen true square wave (which can be problematic) in really cheapo UPSes and battery inverters, but that is the least of my list of concerns about using them. If you buy a decent UPS, this’ll be a nonissue.
 
Joined
Jul 25, 2006
Messages
12,011 (1.86/day)
Location
Nebraska, USA
System Name Brightworks Systems BWS-6 E-IV
Processor Intel Core i5-6600 @ 3.9GHz
Motherboard Gigabyte GA-Z170-HD3 Rev 1.0
Cooling Quality case, 2 x Fractal Design 140mm fans, stock CPU HSF
Memory 32GB (4 x 8GB) DDR4 3000 Corsair Vengeance
Video Card(s) EVGA GEForce GTX 1050Ti 4Gb GDDR5
Storage Samsung 850 Pro 256GB SSD, Samsung 860 Evo 500GB SSD
Display(s) Samsung S24E650BW LED x 2
Case Fractal Design Define R4
Power Supply EVGA Supernova 550W G2 Gold
Mouse Logitech M190
Keyboard Microsoft Wireless Comfort 5050
Software W10 Pro 64-bit
Heck, I ran AC fan motors in the past on my tripplites stepped sine wave.
Yeah, I have my 3/4 HP garage door opener on my 25 year old APC 900VA UPS. Works fine. But motors are not high speed digital devices either.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
But WHY is this happening

First, it isn't necessarily overvoltage unless the cap isn't designed to handle that voltage. Not knowing the PSU they used personally, and not knowing the circuit, I don't know if that cap is actually being overvolted. I will say, most consumer PSUs with APFC tend to use 400v caps for the bulk cap, so this would be driving those caps a little hard.

As to why this is happening, it is likely due to the voltage spikes at the beginning of the square wave forms. These spikes go beyond the normal output voltage, and that is what is causing the cap to be overcharged. You can see these spikes in the oscilloscope shots.

I don't think it would be much of an issue for the small amount of time the PSU is likely going to be running off the UPS, and the small time of the spikes.

Heck, I ran AC fan motors in the past on my tripplites stepped sine wave. Other than a small RPM reduction, even they had no issue, and motors are technically the place you should see it most.

I've done the same. Running motors off modified sine/square wave tends to make the motors hum pretty loudly, at least to me. But, hey, when the power is out I'll live with the loud hum if it means I have a fan pointed at me. I'll also say the fan motor did get a little warmer than usual when running off a square wave, but it wasn't dangerous.
 
D

Deleted member 191766

Guest
Not to be a pain... but one of the voltages was 497V (Model: 1000VA) and no beginning spike showed on the oscilloscope trace.

I have a theory, but the circuit diagram is at home, and I'm not sure my reasoning is sound; so I wanted to know what the folks here thought.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
Not to be a pain... but one of the voltages was 497V (Model: 1000VA) and no beginning spike showed on the oscilloscope trace.

I have a theory, but the circuit diagram is at home, and I'm not sure my reasoning is sound; so I wanted to know what the folks here thought.

But the oscilloscope they are using is also a piece of junk, so it's easy that the spike just isn't showing up. Note on the oscilloscope shots that are missing the spike, the rise and fall lines are either missing or half missing too.
 
Joined
Aug 20, 2007
Messages
20,709 (3.41/day)
System Name Pioneer
Processor Ryzen R9 7950X
Motherboard GIGABYTE Aorus Elite X670 AX
Cooling Noctua NH-D15 + A whole lotta Sunon and Corsair Maglev blower fans...
Memory 64GB (4x 16GB) G.Skill Flare X5 @ DDR5-6000 CL30
Video Card(s) XFX RX 7900 XTX Speedster Merc 310
Storage 2x Crucial P5 Plus 2TB PCIe 4.0 NVMe SSDs
Display(s) 55" LG 55" B9 OLED 4K Display
Case Thermaltake Core X31
Audio Device(s) TOSLINK->Schiit Modi MB->Asgard 2 DAC Amp->AKG Pro K712 Headphones or HDMI->B9 OLED
Power Supply FSP Hydro Ti Pro 850W
Mouse Logitech G305 Lightspeed Wireless
Keyboard WASD Code v3 with Cherry Green keyswitches
Software Windows 11 Enterprise (legit), Gentoo Linux x64
Yeah, I have my 3/4 HP garage door opener on my 25 year old APC 900VA UPS. Works fine. But motors are not high speed digital devices either.

Oh no, not at all. But you'd think logically speaking AC motors would be the first to exhibit issues due to how they work. But I get your point, a digital computer has so many little things that it has room for failure in it's own right.

Point is, being of even halfway decent build quality, none should have an issue.
 
D

Deleted member 191766

Guest

Attachments

  • active-pfc.jpg
    active-pfc.jpg
    18.4 KB · Views: 143
Last edited by a moderator:
Joined
Jul 25, 2006
Messages
12,011 (1.86/day)
Location
Nebraska, USA
System Name Brightworks Systems BWS-6 E-IV
Processor Intel Core i5-6600 @ 3.9GHz
Motherboard Gigabyte GA-Z170-HD3 Rev 1.0
Cooling Quality case, 2 x Fractal Design 140mm fans, stock CPU HSF
Memory 32GB (4 x 8GB) DDR4 3000 Corsair Vengeance
Video Card(s) EVGA GEForce GTX 1050Ti 4Gb GDDR5
Storage Samsung 850 Pro 256GB SSD, Samsung 860 Evo 500GB SSD
Display(s) Samsung S24E650BW LED x 2
Case Fractal Design Define R4
Power Supply EVGA Supernova 550W G2 Gold
Mouse Logitech M190
Keyboard Microsoft Wireless Comfort 5050
Software W10 Pro 64-bit
Oh no, not at all. But you'd think logically speaking AC motors would be the first to exhibit issues due to how they work.
IMO, the biggest issue with AC motors is the HUGE current demand they place on the circuit when first spinning up until they get to their operational speed. That is, it takes a lot more energy to get a motor (same with a gas engine) up to full speed than it does to maintain that speed.

It is a similar problem with laser printers. They should not go on a UPS because laser printers require a lot of energy to fuse the toner, but even more so to heat up the fuser during the initial power on process.
But I get your point, a digital computer has so many little things that it has room for failure in it's own right.
Not only that, but a spinning motor has momentum and will keep spinning for a short time if there is a dip or short duration sag in power, and consequently recover quickly after the anomaly passes. High speed digital electronics are likely to come to total stop (halt) state and will wait in that state until signaled to start again.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
I finally got to the circuit diagram

That isn't what I meant. Yes, I know what a APFC circuit design looks like. When I said I didn't know the circuit, I meant I don't know what component values they are using in their design. If they are using a 500v capacitor then it's not being overvolted in the link from the original post.
 
D

Deleted member 191766

Guest
Good point; wish the author of the article
had reported the values.

But what I am after is understanding WHY the voltage gets higher, and the answer is not 'because its rectangular wave '.

Because squarewave gets/stays ultra high at the wave peak? That's about all there is to it.

As I understand it, it is a rectangular wave whose height matches that of the sine wave and whose width is such that the resistive heating is the same as the sine wave it replaces; i.e. it is built to be the same height.

Did you try Bing Google? It really is amazing what folks can learn and how quickly (much faster than waiting for a forum reply) they could learn for themselves if they just took a few seconds to type their questions in their favorite search engines. Others include DuckDuckGo, dogpile, Yahoo and others.

These search engines are great to verify what we think we know before posting inaccurate information too. I highly recommend them.

Of course; that is why I am here to inquire of the collective brain.

I actually have a theory based on the circuit diagram I attached, but I am not sure that theory is sound.

Apologies that it took me so long to get back with a reply.
 

Attachments

  • active-pfc.jpg
    active-pfc.jpg
    18.4 KB · Views: 97
Last edited by a moderator:

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
But what I am after is understanding WHY the voltage gets higher, and the answer is not 'because its rectangular wave '.

And I already gave you that answer.
 
Joined
Nov 1, 2008
Messages
4,213 (0.75/day)
Location
Vietnam
System Name Gaming System / HTPC-Server
Processor i7 8700K (@4.8 Ghz All-Core) / R7 5900X
Motherboard Z370 Aorus Ultra Gaming / MSI B450 Mortar Max
Cooling CM ML360 / CM ML240L
Memory 16Gb Hynix @3200 MHz / 16Gb Hynix @3000Mhz
Video Card(s) Zotac 3080 / Colorful 1060
Storage 750G MX300 + 2x500G NVMe / 40Tb Reds + 1Tb WD Blue NVMe
Display(s) LG 27GN800-B 27'' 2K 144Hz / Sony TV
Case Xigmatek Aquarius Plus / Corsair Air 240
Audio Device(s) On Board Realtek
Power Supply Super Flower Leadex III Gold 750W / Andyson TX-700 Platinum
Mouse Logitech G502 Hero / K400+
Keyboard Wooting Two / K400+
Software Windows 10 x64
Benchmark Scores Cinebench R15 = 1542 3D Mark Timespy = 9758
I thought that square wave input was much better than sinusoidal voltage for devices which use a switched mode power supply?
In theory they should.
 
Joined
Jul 25, 2006
Messages
12,011 (1.86/day)
Location
Nebraska, USA
System Name Brightworks Systems BWS-6 E-IV
Processor Intel Core i5-6600 @ 3.9GHz
Motherboard Gigabyte GA-Z170-HD3 Rev 1.0
Cooling Quality case, 2 x Fractal Design 140mm fans, stock CPU HSF
Memory 32GB (4 x 8GB) DDR4 3000 Corsair Vengeance
Video Card(s) EVGA GEForce GTX 1050Ti 4Gb GDDR5
Storage Samsung 850 Pro 256GB SSD, Samsung 860 Evo 500GB SSD
Display(s) Samsung S24E650BW LED x 2
Case Fractal Design Define R4
Power Supply EVGA Supernova 550W G2 Gold
Mouse Logitech M190
Keyboard Microsoft Wireless Comfort 5050
Software W10 Pro 64-bit
I thought that square wave input was much better than sinusoidal voltage for devices which use a switched mode power supply?
In theory they should.
There is some truth to this - though in this case "better" should probably be defined as "easier" rather than implying sinewaves are not as good or even bad.

The reason why is because in this scenario, DC can be thought of as basically a square wave that has been rectified - that is, one polarity (the negative side, for example) has been flipped so now you have 2 positives for a constant positive with a "flat top" on the waveform. That is a lot easier to achieve than a sinewave which is really constantly varying voltage. Also, when producing DC voltages, you want to remove (suppress) all AC components (such as ripple) riding the DC output voltage. This is a lot "easier" to obtain when you don't have to employ as much filtering circuitry when you already start out with a "flat top" waveform.

While this article was written way back in 1985/1989, it is still applicable today:
UPS - UNINTERRUPTIBLE POWER SYSTEM WAVEFORMS
IS A SINE WAVE NECESSARY?


This is why the push for pure sinewave UPS is nothing more than pure marketing bullfeathers. The only real reason pure sinewave UPS have become more popular in recent years is their prices have [finally] come down so they are competitive with stepped approximation or simulated sinewave (the traditional type) UPS.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
Not all waveforms had spikes.

And apparently, by your logic, not all the wave forms had rising edges either. We know they do, but if that junk scope doesn't show it, it must not exist, right?
 
D

Deleted member 191766

Guest
By the same logic; if the scope doesn't show it, it is still there?

My guess is that these are unloaded outputs.

I thought that square wave input was much better than sinusoidal voltage for devices which use a switched mode power supply?
In theory they should.

Well, the instantaneous currents can be higher, and so the heating losses more.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
By the same logic; if the scope doesn't show it, it is still there?

My guess is that these are unloaded outputs.

Yes, because you can see artifacts of them on the scope. All square wave AC outputs have a spike. The design and components necessary to suppress the spike are so expensive, that implementing them is just as expensive as just using a pure sine wave inverter.

The square wave waveform always has a rising edge that overshoots the voltage(spike), then a small falling edge that dips below the desired voltage, then a small rising edge again that gets pretty close to the desired voltage. The reality is that the voltage actually continued to oscillate the entire time until it drops back to 0, but the oscillation is so small after the initial spike it doesn't matter. I have never seen a square wave UPS that didn't have these spikes.

On the pictures that are missing the spike(and part or all of the rising edge) still have the secondary smaller rising edge that happens after the spike. So we can use that to assume that the spikes are still there. Again, yes, this is only an assumption because of the garbage scope, but it is the best assumption based on the facts we know. /thread
 
D

Deleted member 191766

Guest
Fair enough

Here is my conjecture: when the voltage and current match in phase the PFC control has nothing to do and one gets a certain voltage on the capacitor; but
  • If the PFC circuit is active (trying to phase match) it will be pulling current off (see the attached circuit diagram)
  • Now, since the circuit is designed not to waste energy the output DC I*V must be the same... so if one is reducing the current out, the voltage out must increase.
By trying to understand the cause I was wondering if there was a way to avoid the problem; in this case phase matching to a rectangular wave is probably not worth the trouble.
 

Attachments

  • active-pfc.jpg
    active-pfc.jpg
    18.4 KB · Views: 98
Last edited by a moderator:
Top