The smallest water-cooled SFF (Core i 7 7800t rtx 2080ti) in a DAN A4 package. 7.25l

[sanchom]

How you manage to get all that in there and still keep it cool is mind blowing!! Awesome work!!

This is not all. A wattmeter will be installed at the bottom of the assembly under the radiator.

 

[Rimantas]

@sanchom What kind of cpu water block do you use?

 

[sanchom]

It remains to connect the cooler and fill in the liquid






12 volt to 5 volt converter with dynamic voltage regulation

 

[Bubster]

Looks like a very claustrophobic small box room i used to live in a couple decades ago

 

[sanchom]

Looks like a very claustrophobic small box room i used to live in a couple decades ago

In the lower part, under the radiator, I will install a wattmater (already ordered). And there will be no more room

 

[Arrakis9]

this build is absolutely crazy! this is the kind of hardware modding I love to see here, you sir are a god among men for the level of engineering you put into this build. keep it up!

 

[sanchom]

this build is absolutely crazy! this is the kind of hardware modding I love to see here, you sir are a god among men for the level of engineering you put into this build. keep it up!

Many thanks

 

[sanchom]

 

[sanchom]

Today I ordered a raiser for a PCI-E slot, assembled on a PLX microcircuit (bifurcation on ANY motherboard is NOT NEEDED), all two slots will work at a speed of 16X16 !!!. Just insert the raiser into the PCI slot and you have 2 PCIX16 connectors.

 

[Grisa2005]

Just came across this thread and it is very insane work, congratulations!
I plan to do something similar
May I ask the used cpu block height? One similar block I could find is alphacool eisblock xpx 1u which has 25.5mm height with sideport. it still wouldn't fit in dan a4 with 48mm cpu height constraint, considering 20mm rad+15 mm fan. Then This block should be 13 mm height or less. Is that correct? The cooler master block is intel one, did you have to do modify it fit to the am4?

Thanks a lot, and keep us posted about your awesome work!

 

[sanchom]

12mm waterblock height, no need to alter the Intel standard mount on this motherboard

 

[element72]

it's finally completed right?

 

[Deleted member 178884]

Today I ordered a raiser for a PCI-E slot, assembled on a PLX microcircuit (bifurcation on ANY motherboard is NOT NEEDED), all two slots will work at a speed of 16X16 !!!. Just insert the raiser into the PCI slot and you have 2 PCIX16 connectors.

What's the model? Sounds interesting.

 

[sanchom]

Supermicro RSC-G2F-A66-X1

Riser Card Matrix | Supermicro

www.supermicro.com

 

[Rimantas]

I have dan a4 v4.1 I tried to do similar build, but ran in to some clearance issue. CPU side is about 60mm depth and standoff + motherboard + vl ram is about 30mm. I am missing 5mm for noctua a12X15 + tx240. @sanchom did you modify you motherboard standoffs?

 

[sanchom]

I have dan a4 v4.1 I tried to do similar build, but ran in to some clearance issue. CPU side is about 60mm depth and standoff + motherboard + vl ram is about 30mm. I am missing 5mm for noctua a12X15 + tx240. @sanchom did you modify you motherboard standoffs?

https://i.postimg.cc/V649pxgf/image-23-02-20-10-26.jpg

https://i.postimg.cc/MpR7qM5r/image-23-02-20-10-26-1.jpg

 

[Rimantas]

thanks, shaving noctua on both sides should do the trick

 

[sanchom]

thanks, shaving noctua on both sides should do the trick

good luck

 

[sanchom]

Freon cooling and RTX 3090 FE coming soon in this case

 

[Lantern007]

I'm about to get someone else to modify my Nvlink bridge the same way as yours. Would you mind telling me which extension cable did you use to solder onto your Nvlink bridge?

 

[sanchom]

https://i.postimg.cc/vTBstcMv/IMG-5383.jpg

130$ - 30 days