Hello. As explained, my laptop's GPU 1660 TI has higher temps than it did before i repasted it. I know that shouldn't happen, but i did the repaste twice and after i checked how it was after my first application it seemed ok for the GPU atleast, but the paste hadn't covered the CPU fully, so just for good measure i did the line method on them both. The CPU went from about 93-96 in Cyberpunk to about 83-85 or so. Not the best, but i've already done it twice. But the real problem is with the GPU which seems to have gone from it's max 83 with stock paste to 86 max with the repaste, with fans on max. it doesnt even seem to be moving 1 degree at all. but when i close the game, it instantly drops to about 50 and stays there, even on auto fan mode. And with the line method, there is almost a guarantee that the GPU is covered, since i also tightened the screws with the criss cross method and did it slowly, to make sure it spread out properly. But it still ends in higher temps than before. How come? can anybody help? i really dont want to open it up again and repaste the third time in just 2 days. Any help is appreciated.