• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Unigine Heaven 4.0 Benchmark Scores Part 2

That's a pretty nice score/overclock for a 3070, for by just using a single 8-pin lol. Pretty impressed with those temps though, is the 3070FE cooler that good?
thank you , i can go higher with fine tuning and without the riser cable, can't wait intel 11 series to enable pcie4 as well, i can pump the memory at +1400 no problem, and that's with stock voltage,maybe I've got lucky with the sample.

about the temps, this is not on air clearly...with the stock cooler i got around 4800 points, i can post that too if you like, with 85% fan temps where around 66/68, wich is not bad for stock cooler i guess, just a bit noisy, i've noticed that after 60 the frequency start to drop, but you can't do much about that on air, especially during an overclock like this
 
RTX 3090 pre and post OC
Capture2.PNG
Capture.PNG
 
RTX3070 benchmark update

View attachment 192786
Dude you got OC +140 on GPU and +338 on VRAM and you wanna tell me you got 43 degrees under full load and 54.4 degrees hot spot,111.3% TDP.. and all that with 30% fan speed? Who are you kidding?
 
Dude you got OC +140 on GPU and +338 on VRAM and you wanna tell me you got 43 degrees under full load and 54.4 degrees hot spot,111.3% TDP.. and all that with 30% fan speed? Who are you kidding?
Dude if you just read 2 post before the last one, you would know as i said that this is under a custom loop, i have the one on air as well, temps were around 66/68 with 85% fan speed
 
Dude if you just read 2 post before the last one, you would know as i said that this is under a custom loop, i have the one on air as well, temps were around 66/68 with 85% fan speed
Oh sorry then..

Anyways, here is my Zotac 3080 Trinity, default clocks.
VRAM max temps seem bit high for a 2009 software, but I play Warzone daily all maxed @ 1440p with RT on and it sits around 86 degrees max.. So I guess its fine..
Just one question from me, any idea why in GPU -Z it says Zotac/PC partner lol? And not just Zotac? Although I have updated to latest GPU - Z only yesterday and I am almost certain it was only Zotac before.

 

Attachments

  • Unigine H4.jpg
    Unigine H4.jpg
    300.9 KB · Views: 629
Last edited:
Oh sorry then..

Anyways, here is my Zotac 3080 Trinity, default clocks.
VRAM max temps seem bit high for a 2009 software, but I play Warzone daily all maxed @ 1440p with RT on and it sits around 86 degrees max.. So I guess its fine..
Just one question from me, any idea why in GPU -Z it says Zotac/PC partner lol? And not just Zotac? Although I have updated to latest GPU - Z only yesterday and I am almost certain it was only Zotac before.
np...you got micron memory witch are not the best, anyway set the fan speed higher while benchmarking, about the gpuZ , well maybe they just update the database
 
np...you got micron memory witch are not the best, anyway set the fan speed higher while benchmarking, about the gpuZ , well maybe they just update the database
On the contrary though, AFAIK Micron is pretty much the only GDDR6X ram chips supplier for 3080s and 3090s. So its no like we have a choice :D
I will be happy to accept some more info on the topic though.. Lastly, I know the Zotac 3080 Trinity is probably the weakest 3080,but maan Am I happy I managed to get mine for £689!!
Looks amazing, its really quiet and after they have fixed the (global) CAPs issue and the (fair enough, quite embarrassing) Spectra Fiasco, My Trinity hasnt let me down.
 
On the contrary though, AFAIK Micron is pretty much the only GDDR6X ram chips supplier for 3080s and 3090s. So its no like we have a choice :D
I will be happy to accept some more info on the topic though.. Lastly, I know the Zotac 3080 Trinity is probably the weakest 3080,but maan Am I happy I managed to get mine for £689!!
Looks amazing, its really quiet and after they have fixed the (global) CAPs issue and the (fair enough, quite embarrassing) Spectra Fiasco, My Trinity hasnt let me down.
i see , you should be fine, maybe those temp are high just for overclock, since you are at stock now..good price anyway
 
i see , you should be fine, maybe those temp are high just for overclock, since you are at stock now..good price anyway
Once again, sorry about earlier jumping on your post without reading your previous post. And looking at your 3070 custom loop stats, it would really look like am too jealous if I wouldnt say quite impressive!
 
Once again, sorry about earlier jumping on your post without reading your previous post. And looking at your 3070 custom loop stats, it would really look like am too jealous if I wouldnt say quite impressive!
its better if i don't post the one on air then, it was already a nice score! lol...and what if i say that its a founder edition? :D
by the way its fine, don't worry..... i wouldn't had believe it myself, ive got very lucky with the sample, couldn't ask more for a 3070, I'm almost at limit now
 
hello there I use a sapphire nitro+ 6800 xt overclocked like in the picture with a ryzen 5600x cpu at stock settings cooled by coolermaster hyper 212 black rgb...........
 

Attachments

  • Ocsapphire 6800 xt.jpg
    Ocsapphire 6800 xt.jpg
    224.2 KB · Views: 410
  • heaven1080pgood.jpg
    heaven1080pgood.jpg
    66.2 KB · Views: 467
  • heaven 1440p good.jpg
    heaven 1440p good.jpg
    67.7 KB · Views: 575
This is mine currently. I'm new to all this so just wondering if everything is looking good or some advice at all?

Thanks guys!
a8tse-69sby.jpg
 
Hello again I post my latest and more stable gpu settings -changed voltage at 1050 mv and frequency 2500 to 2600 max ωραμ 2050 -including my benchmark results for default , rage mode and overclocked GPU.
 

Attachments

  • 1440pdefault.jpg
    1440pdefault.jpg
    68.1 KB · Views: 309
  • 1440pRageMode.jpg
    1440pRageMode.jpg
    68 KB · Views: 328
  • 1440pOc2.jpg
    1440pOc2.jpg
    71.6 KB · Views: 320
  • overclock2.jpg
    overclock2.jpg
    208.3 KB · Views: 282
Last edited:
Hello!!

First time, be gentle!

My latest benchmark results! Simple overclock to my CPU and i've fine tuned my GPU :)
Heaven.PNG


Hello!!

First time, be gentle!

My latest benchmark results! Simple overclock to my CPU and i've fine tuned my GPU :)
and at 1440p
received_214919717075604.jpeg
 
hello! i hope i did it properly
 

Attachments

  • Unigine_Heaven_Benchmark_4.0_20210417_0412.jpg
    Unigine_Heaven_Benchmark_4.0_20210417_0412.jpg
    32.8 KB · Views: 343
Hey guys. Just ran this on my Intel 7980XE at 4.8Ghz, and my RTX 2080Ti FE with a 530+ watt power limit. Not bad for a nearly 3 year old graphics cards. I dunno why people were panick selling these things.. They compete at the top with all the other high end GPU’s.

I get around 17,600 timespy graphics if anyone is wondering. (Sustainable gaming performance)

I have (3) EKWB 360MM radiators on a ekwb D5 pump.

My system ram is DDR4 4000Mhz CL15-15-15-30-280-1T. So this greatly helps performance as my latency is only about 47NS.


 
Last edited:
This is mine currently. I'm new to all this so just wondering if everything is looking good or some advice at all?

Thanks guys!
View attachment 193959


How am I having better min FPS with a 1080 and than your 3090? I dont think there is a difference between the 10900k and kF series. But still. Drivers?
 
file:///C:/Users/Camden/Unigine_Heaven_Benchmark_4.0_20210507_1651.html

I'm so new to all this. Just built my pc last weekend with some friends. I'm a noob with everything but I'm trying to learn. Guessing I didn't even post that right? lol
 
Just got my new laptop from Newegg yesterday. After getting everything set up today, here's my benchmark...
Default voltage & fan speed

ASUS ROG Strix G15 (2021) Gaming Laptop - G513QM-ES94
AMD Ryzen 9 5900HX
NVIDIA GeForce RTX 3060 Laptop GPU 115w (130w TGP)
16GB DDR4 3200
512GB PCIe NVMe PCIe 3.0 SSD
15.6" 144Hz IPS Type FHD Display 45% NTSC
Windows 10 Home
Screenshot 2021-05-11 165034.png
 
Last edited:
For funsies. I know this doesn't count, but I thought I'd try the OpenGL MacOS version on an M1 MacBook Air. For some reason it doesn't like 8x AA or 1920 x 1080, but it would run at the conditions pictured. This would have to be running under Rosetta 2. The minimum FPS appears to be very brief, and overall it feels rather consistent, running in the mid/low 30s for most of the bench. The MBA is passively cooled, and it gets pretty warm underneath. I don't know if putting it on something cold would improve scores or not.
1621255442181.png
 
This is an old screenshot from July 17, 2016 at 4 AM, which unfortunately was taken after the previous thread was shut down so I could not post it there back then. This is my first time back in a while and I see that this "new" thread is alive and well, and most everything has been migrated. It looks like some rules have become more strict though so I'm hoping that they don't impact the validity of my submission. I essentially didn't modify any drivers; never have. Hopefully the images are sufficient; they're all I've got. This should get me in the top 10 of 980 TI scores which ultimately was what I wanted.

Intel i7 4790K @ 4.7 GHz - MSI GTX 980 TI Gaming Edition 6G @ 1491 Core / 2029 Memory - Corsair Vengeance Pro 32GB 2400Mhz - Score 2684

Let me know if there's something I need to procure, and I will if I can.
 

Attachments

  • 980 Ti top 10.png
    980 Ti top 10.png
    3.5 MB · Views: 652
  • clock_2684.png
    clock_2684.png
    1.1 MB · Views: 229
  • i7clock.png
    i7clock.png
    36.4 KB · Views: 251
MSI 3090 suprim x @ stock air cooling + stock bios

1080p = 6744 points
1624120249932.png


1440p = 4387 points
1624120324471.png
 
Back
Top