• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

TPU's Nostalgic Hardware Club

Joined
Jul 3, 2016
Messages
758 (0.27/day)
New HW found!

1. Micropolis ST506 - 85MB - 1985 - 5.25" MFM HDD - full height. 900435-01-7B - Rated Input Power 32W!!! :D Someone opened the HDD for who knows what reason. The top platter is scraped a little but there is no r/w head there, so the chances are that it is still ok. I found some case screws that fit perfectly and after I gently used an air compressor to clean it, I put the lid on, never to be opened again. Ideally I would've needed some screws with a sunken head but these are good too and they also look the part. :D At first I thought that some exotic screws would be needed but in the end it was a case of regular chunky threaded screws. Well, a beast like this doesn't need flimsy stuff bolted to it. :D
2. MagTron Inc MT-4170S - 170MB - 5.25" SCSI HDD - half height. 2 pieces
3. Gainward Silent Copper nVIDIA 6800GT PCI-E
4. Shuttle Spacewalker AK32V2.1 - VIA KT266 - The "good" chipset! :D Who in their right mind would prefer the KT266A?!?!??! :D
5. Finally an ASROCK 4CoreDual-SATA2 REV. G/A 2.00

I tested the HDDs and they powered up nicely. For the SCSI HDDs I have a suitable motherboard and add-on cards to test them, but for the MFM HDD I have nothing to try it on. Read write heads activity could be heard.

After 30 minutes of running the sound they made became better and once they were "hot and toasty" I enjoyed them so much more. Music to my ears. :D Imagine running something like this every day. :)
 

Attachments

  • PRW-2021-231.jpg
    PRW-2021-231.jpg
    857.2 KB · Views: 99
  • PRW-2021-232.jpg
    PRW-2021-232.jpg
    816.4 KB · Views: 83
  • PRW-2021-233.jpg
    PRW-2021-233.jpg
    824.7 KB · Views: 94
  • PRW-2021-234.jpg
    PRW-2021-234.jpg
    1.1 MB · Views: 77
  • PRW-2021-235.jpg
    PRW-2021-235.jpg
    728.1 KB · Views: 84
  • PRW-2021-236.jpg
    PRW-2021-236.jpg
    1.1 MB · Views: 94
  • PRW-2021-237.jpg
    PRW-2021-237.jpg
    311.2 KB · Views: 85
  • PRW-2021-238.jpg
    PRW-2021-238.jpg
    745.1 KB · Views: 85
  • PRW-2021-239.jpg
    PRW-2021-239.jpg
    397.6 KB · Views: 93
  • PRW-2021-240.jpg
    PRW-2021-240.jpg
    1.3 MB · Views: 77
  • PRW-2021-241.jpg
    PRW-2021-241.jpg
    1 MB · Views: 99
  • PRW-2021-242.jpg
    PRW-2021-242.jpg
    1.2 MB · Views: 99
  • PRW-2021-243.jpg
    PRW-2021-243.jpg
    1.6 MB · Views: 101
  • PRW-2021-244.jpg
    PRW-2021-244.jpg
    721.6 KB · Views: 93
  • PRW-2021-245.jpg
    PRW-2021-245.jpg
    2 MB · Views: 100
  • PRW-2021-246.jpg
    PRW-2021-246.jpg
    2.2 MB · Views: 89
Joined
Jun 29, 2009
Messages
1,871 (0.35/day)
Location
Heart of Eutopia!
System Name ibuytheusedstuff
Processor 5960x
Motherboard x99 sabertooth
Cooling old socket775 cooler
Memory 32 Viper
Video Card(s) 1080ti on morpheus 1
Storage raptors+ssd
Display(s) acer 120hz
Case open bench
Audio Device(s) onb
Power Supply antec 1200 moar power
Mouse mx 518
Keyboard roccat arvo
love the gainward copper cooler and card !
and the asrock mobo
 

Chloefile

S.T.A.R.S.
Joined
Dec 16, 2012
Messages
10,879 (2.64/day)
Location
Finland
System Name 4K-gaming
Processor AMD Ryzen 7 5800X
Motherboard Gigabyte B550M Aorus Elite
Cooling Custom loop (CPU+GPU, 240 & 120 rads)
Memory 32GB Kingston HyperX Fury @ DDR4-3466
Video Card(s) PowerColor RX 6700 XT Fighter
Storage ~4TB SSD + 6TB HDD
Display(s) Acer 27" 4K120 IPS + Lenovo 32" 4K60 IPS
Case Fractal Design Define Mini C
Audio Device(s) Asus TUF H3 Wireless
Power Supply EVGA Supernova G2 750W
Mouse Logitech MX518
Keyboard Roccat Vulcan 121 AIMO
VR HMD Oculus Rift CV1
Software Windows 11 Pro
Benchmark Scores It runs Crysis remastered at 4K
I had a 6800U AGP with the same cooler, love that one :)
 
Joined
Sep 21, 2020
Messages
1,465 (1.14/day)
Processor 5800X3D -30 CO
Motherboard MSI B550 Tomahawk
Cooling DeepCool Assassin III
Memory 32GB G.SKILL Ripjaws V @ 3800 CL14
Video Card(s) ASRock MBA 7900XTX
Storage 1TB WD SN850X + 1TB ADATA SX8200 Pro
Display(s) Dell S2721QS 4K60
Case Cooler Master CM690 II Advanced USB 3.0
Audio Device(s) Audiotrak Prodigy Cube Black (JRC MUSES 8820D) + CAL (recabled)
Power Supply Seasonic Prime TX-750
Mouse Logitech Cordless Desktop Wave
Keyboard Logitech Cordless Desktop Wave
Software Windows 10 Pro
1. Micropolis ST506 - 85MB - 1985 - 5.25" MFM HDD - full height.
That sure is an odd find! This drive is massive, look at how thick the case is. I've looked up the specs:
transfer rate 625 KB/s
weight 2.6 kg
acoustic noise 51 dB
:twitch:
 
Joined
Apr 7, 2021
Messages
83 (0.08/day)
Location
Republic of Hrvatsko Zagorje
New toy. Category: "modded and un-original". Best kind :).
Actually, it came with busted cooler so I took the liberty to pimp it up.

IMG_20210905_174340.jpg


IMG_20210905_174402.jpg



And some scores.
First take with default clocks 250/512. Second with 290/550.
4200Ti_2001.JPG

4200Ti_2001_OC.JPG


Temps: 46°C under load, 42°C when idle.
 
Last edited:
Joined
Nov 23, 2020
Messages
538 (0.44/day)
Location
Not Chicago, Illinois
System Name Desktop-TJ84TBK
Processor Ryzen 5 3600
Motherboard Asus ROG Strix B350-F Gaming
Cooling ARCTIC Liquid Freezer II 120mm, Noctua NF-F12
Memory B-Die 2x8GB 3200 CL14, Vengeance LPX 2x8GB 3200 CL16, OC'd to 3333 MT/s C16-16-16-32 tRC 48
Video Card(s) PNY GTX 690
Storage Crucial MX500 1TB, MX500 500GB, WD Blue 1TB, WD Black 2TB, WD Caviar Green 3TB, Intel Optane 16GB
Display(s) Sceptre M25 1080p200, ASUS 1080p74, Apple Studio Display M7649 17"
Case Rosewill CRUISER Black Gaming
Audio Device(s) SupremeFX S1220A
Power Supply Seasonic FOCUS GM-750
Mouse Kensington K72369
Keyboard Razer BlackWidow Ultimate 2013
Software Windows 10 Home 64-bit, macOS 11.7.8
Benchmark Scores are good
I went to a friend's house to take care of their cat and it turns out they have:
- A Commodore 128 (they still have the original box)
- Pentium II system
- NES, SNES, N64, GameCube, Wii
- PS2, PS3
- 2x Sega somethings
According to him, anything he owns that can be modded is modded.
Here's some pictures I took (cat pictures too!):
c128 box.jpeg
c128.jpeg
beige.jpeg
GC.jpeg
Cat
luna 1.jpg
luna 2.jpg

I know the pictures are bad, my iPhone 6S isn't great in low light
 
Joined
Sep 12, 2015
Messages
177 (0.06/day)
Location
Croatia
Processor Intel Pentium III-S 1.4 Ghz
Motherboard Asus TUSL2-C
Cooling CoolerMaster Sckt.370
Memory Kingston 2x256Mb SDR 133 Mhz
Video Card(s) 3dfx Voodoo 5 5500 AGP 64Mb
Storage Crucial BX500 240GB
Display(s) Fujitsu B19-5 ECO
Case Antec PlusView 1000 AMG
Audio Device(s) Creative X-FI XtremeGamer
Power Supply XFX TS 550W Bronze
Mouse Glorious MODEL O-
Keyboard Corsair K70 RGB MK.2
Software Windows XP
Benchmark Scores 3DMARK00-4905, 3DMARK01SE-2168
So the fans on the Voodoo 5 5500 are going to drive me insane and that is a fact :D So to remedy the situation I ordered some Noiseblocker BlackSilentPro fans 40mm. Now this would be a strait forward DIY but it seems people don't know how to count these days so I got only 7 rubber spacers instead of 8.

This is very easy to fix don't get me wrong but the fans were pricey and I want it to look good. I contacted Blacknoise and are now waiting for a response. Here are some pictures of the DIY :banghead:

1.jpg
2.jpg
3.jpg
4.jpg
5.jpg
6.jpg
7.jpg
8.jpg
9.jpg
10.jpg
11.jpg
 
Joined
Jul 3, 2016
Messages
758 (0.27/day)
Thicc!!! :)



On the V5 5500 I'd mount a couple of Noctua (puke edition) https://noctua.at/en/nf-a4x10-5v/specification 5V version. They come in 10mm and 20mm thickness. I preffer the 10mm.

I have a 12V 40x40x10 on my 5x86 and it is pretty silent.


Also I would mod them with the wires from the old fans to keep everything tidy or I would buy new fan headers and wires that plug into the existing ones that are on the board. :D

Just my 2 cents. :)

Anyway. Both of these methods, yours and what I would do if I'd use a V5 5500 in a build, accomplish the same thing. Keeping cool and quiet a great card.

The NB fans that you bought are 12V.
 
Last edited:
Joined
Sep 12, 2015
Messages
177 (0.06/day)
Location
Croatia
Processor Intel Pentium III-S 1.4 Ghz
Motherboard Asus TUSL2-C
Cooling CoolerMaster Sckt.370
Memory Kingston 2x256Mb SDR 133 Mhz
Video Card(s) 3dfx Voodoo 5 5500 AGP 64Mb
Storage Crucial BX500 240GB
Display(s) Fujitsu B19-5 ECO
Case Antec PlusView 1000 AMG
Audio Device(s) Creative X-FI XtremeGamer
Power Supply XFX TS 550W Bronze
Mouse Glorious MODEL O-
Keyboard Corsair K70 RGB MK.2
Software Windows XP
Benchmark Scores 3DMARK00-4905, 3DMARK01SE-2168
Thicc!!! :)



On the V5 5500 I'd mount a couple of Noctua (puke edition) https://noctua.at/en/nf-a4x10-5v/specification 5V version. They come in 10mm and 20mm thickness. I preffer the 10mm.

I have a 12V 40x40x10 on my 5x86 and it is pretty silent.

Also I would mod them with the wires from the old fans to keep everything tidy or I would buy new fan headers and wires that plug into the existing ones that are on the board. :D

Just my 2 cents. :)

Anyway. Both of these methods, yours and what I would do if I'd use a V5 5500 in a build, accomplish the same thing. Keeping cool and quiet a great card.

The NB fans that you bought are 12V.
You know I was looking at Noctua fans but I just couldn't get over the brown color. I wanted something black and industrial looking and they are really quiet. The best part is that I didn't have to mod anything I just screwed the fans in the exact same spots so no additional screw damage to the original passive heatsinks. Thanks !
 
Joined
Jun 22, 2006
Messages
1,044 (0.16/day)
System Name Beaver's Build
Processor AMD Ryzen 9 5950X
Motherboard Asus ROG Crosshair VIII Hero (WI-FI) - X570
Cooling Corsair H115i RGB PLATINUM 97 CFM Liquid
Memory G.Skill Trident Z Neo 32 GB (2 x 16 GB) DDR4-3600 Memory - 16-19-19-39
Video Card(s) NVIDIA GeForce RTX 4090 Founders Edition
Storage Inland 1TB NVMe M.2 (Phison E12) / Samsung 950 Pro M.2 NVMe 512G / WD Black 6TB - 256M cache
Display(s) Alienware AW3225QF 32" 4K 240 Hz OLED
Case Fractal Design Design Define R6 USB-C
Audio Device(s) Focusrite 2i4 USB Audio Interface
Power Supply SuperFlower LEADEX TITANIUM 1600W
Mouse Razer DeathAdder V2
Keyboard Razer Cynosa V2 (Membrane)
Software Microsoft Windows 10 Pro x64
Benchmark Scores 3dmark = https://www.3dmark.com/spy/32087054 Cinebench R15 = 4038 Cinebench R20 = 9210
Joined
Jan 1, 2015
Messages
1,799 (0.53/day)
Location
EU
System Name Adison "Open Space" 19
Processor Intel Pentium II, 350MHz
Motherboard Chaintech 6BTM, Slot 1
Cooling SECC Cartridge
Memory 1x 64MB, PC100
Video Card(s) ATI Rage IIc AGP, Diamond Monster 3DII 12MB
Storage BTC BCD-40XH, Quantum Fireball 3.5 Series, EX6.4 GB
Display(s) LG StudioWorks 57M
Case Adison Midi Tower, ATX
Audio Device(s) Creative SoundBlaster 128
Power Supply Codegen 300W
Mouse Genius SlimStar 110, PS/2
Keyboard Genius SlimStar 110, PS/2
Software Microsoft Windows 98
With those few bits & pieces of what's left to do on my Adison systems, I'm actually working on something modern, which doesn't quite fit into this thread ... but depending on the overall interest, I may (or may not) document everything & make it a project of its own.

Long story short, I'm finally stepping up from Q6600 and upgrading to Core i5. Both the mobo, CPU (i5, 760) and 8GB of DDR3 RAM have been kindly donated to me by someone from TPU (I already asked him, and will gladly credit him in public unless he prefers to stay anonymous)

So, with that being said ... I bought all the remaining bits & pieces and now I'm slowly putting everything together. Still waiting on SSD drive, I/O Shield plate & CPU cooler (Hyper 212 EVO), but otherwise I'm good to go :clap:

What I've been given for free:
CPU: Core i5 760 (Socket 1156) ... in addition to 760, I was also kindly given i5 750 & i5 661
MBO: Gigabyte P55M-UD4
RAM: 2x 4GB HyperX Beast 2400 CL11

What I already have in stock & will recycle, re-purpose from the existing Q6600 setup:
GPU: Gigabyte GTX760
PSU: CoolerMaster 600W
Case: CoolerMaster Cosmos
ODD1: Philips ATA DVD/DVD-RW
ODD2: Philips ATA DVD/DVD-RW
HDD: Western Digital 320GB

What I bought in addition to all the previously-mentioned components:
RAM: 2x 4GB HyperX Fury 1866
SSD: Western Digital Blue SSD 500GB (+ mounting bracket conversion kit)
HDD: Western Digital Gold 2TB (Enterprise)
Other: Hyper 212 cooler/heatsink, L-Shaped SATA cables

Meanwhile, my existing Q6600 system (MSI P43 Neo) will replace yet another Q6600 in another case, where the motherboard (Gigabyte P31-ES3G) is being limited by the amount of DDR2 modules (2x DDR2) ... vs the MSI board, which supports of up to 4x and therefore 8GB of DDR2 in total.

Furthermore, the existing, Gigabyte Q6600 system is being cooled by Hyper TX3 vs the MSI rig, which already has 212 EVO, identical to the one which I bought for i5. So, by swapping out the entire assembly I'm going to upgrade in more ways than one ... or at least that's the plan :)

At the same time, the old Gigabyte Q6600 will be stripped for parts & repurposed elsewhere. 2x 2GB of DDR2 will be given to a family member, P31-ES3G will be safely stored inside the original box, Q6600 will be mounted inside the Adison "sleeper" (replacing the existing Core2 Duo) along with the cooler, Cooler Master Hyper TX3, because I'll have to upgrade the existing cooling to match the new requirements for Q6600.
 
Joined
Jan 16, 2014
Messages
734 (0.20/day)
Location
Bacau, Romania
System Name Star Platinum
Processor Intel Core i5-3470 3.20GHz
Motherboard Gigabyte B75M-D3H
Cooling EKL
Memory 16GB DDR3-1600
Video Card(s) Gigabyte GTX650 1GB GDDR5
Storage 2x Seagate ST31000340NS 1TB SATA II
Display(s) Samsung 32 inch
Case Delux MG760
Audio Device(s) Realtek High Definition Audio + X-Fi XtremeGamer SB0730
Power Supply FSP Bluestorm II 500W
Mouse Marvo KM400 Mouse
Keyboard Marvo KM400 keyboard
Software Windows 10 Enterprise LTSC 1809
Remember how I said back in post #9027 that I'd be getting white hair early in my life until I will see an Acer 6530G that still works perfectly as it should? Well, I still have my brown hair, but I finally live to own a working 6530G.

20210909_201645.jpg
20210909_201651.jpg

The smallest issues with it were a HD3470 that was about to go bad (thankfully I had a spare one) and a long dead small CMOS battery (which in shortage of such small batteries (it's way smaller than a 2032, about half its size.) I replaced with a normal wired 2032 size battery) which were solved fast enough. I'll probably up the GPU to a 3650 though, and maybe go for Win10 LTSC.

EDIT: Found out the type of the old battery, it's a CR1220.
 
Last edited:
Joined
Apr 7, 2021
Messages
83 (0.08/day)
Location
Republic of Hrvatsko Zagorje
Arrived yesterday, "new old stock" FireGL X3:
FireGL_X3_1.jpg

FireGL_X3_2.jpg


Card was unlockable to 16 pipelines:
FireGL_X3_2001.JPG

FireGL_X3_2003.JPG


D3D games work as good as on standard Radeon with Catalyst.
OpenGL should be problematic on FireGL, I didn't test it yet. But, there are scripts to patch the driver via Riva Tuner. I need to look into it.
 
Joined
Jul 15, 2006
Messages
972 (0.15/day)
Location
Malaysia
Processor AMD Ryzen 7 5700G
Motherboard Gigabyte B450M-S2H
Cooling Scythe Kotetsu Mark II
Memory 2 x 16GB SK Hynix OEM DDR4-3200 @ 3666 18-20-18-36
Video Card(s) Colorful RTX 2060 SUPER 8GB
Storage 250GB WD BLACK SN750 M.2 + 4TB WD Red Plus + 4TB WD Purple
Display(s) AOpen 27HC5R 27" 1080p 165Hz
Case COUGAR MX440 Mesh RGB
Audio Device(s) Creative X-Fi Titanium HD + Kurtzweil KS-40A bookshelf
Power Supply Corsair CX750M
Mouse Razer Deathadder Essential
Keyboard Cougar Attack2 Cherry MX Black
Software Windows 10 Pro 22H1 x64
Arrived yesterday, "new old stock" FireGL X3:

Card was unlockable to 16 pipelines:

D3D games work as good as on standard Radeon with Catalyst.
OpenGL should be problematic on FireGL, I didn't test it yet. But, there are scripts to patch the driver via Riva Tuner. I need to look into it.
Do let me know, I'm kinda wanted to buy this card before because its the last arch to support Truform, but ever since dgVoodoo support Truform emulation I don't need it anymore :rockout: For those who wanted to see how Truform looks like can download it here. Its supported since WIP80, it only work for DirectX games I believe since OpenGL games like RtCW doesn't work.
 
Joined
Jan 16, 2014
Messages
734 (0.20/day)
Location
Bacau, Romania
System Name Star Platinum
Processor Intel Core i5-3470 3.20GHz
Motherboard Gigabyte B75M-D3H
Cooling EKL
Memory 16GB DDR3-1600
Video Card(s) Gigabyte GTX650 1GB GDDR5
Storage 2x Seagate ST31000340NS 1TB SATA II
Display(s) Samsung 32 inch
Case Delux MG760
Audio Device(s) Realtek High Definition Audio + X-Fi XtremeGamer SB0730
Power Supply FSP Bluestorm II 500W
Mouse Marvo KM400 Mouse
Keyboard Marvo KM400 keyboard
Software Windows 10 Enterprise LTSC 1809
This "gem" came in yesterday.

20210911_090610.jpg

PCChips M726MRT. Slot1+370 in AT format, ALI Aladdin Pro chipset.
 
Joined
Jul 5, 2013
Messages
25,559 (6.52/day)
This "gem" came in yesterday.

View attachment 216420

PCChips M726MRT. Slot1+370 in AT format, ALI Aladdin Pro chipset.
WOW! That takes me back... I had a bunch of those boards BITD. They were great for upgrading old AT PC's! People could keep their old cases and upgrade to some new-hotness. That board and a similar one from Epox made me a TON of money. My shop was one of the only places in town that did in-case upgrades from 486 CPUs to Pentium 2/3 CPUs. They were good boards as well.
 
Last edited:
Joined
Jul 3, 2016
Messages
758 (0.27/day)
I'm on a roll baby! :)

Fresh loot! Untested but who cares! The mobos need some caps but I'm not worried. Latelty Sk. A stuff has come in big numbers. My stash of KT133/A boards is growing fast. :)

1. AOpen AK73(A) - S462 - VIA KT133A + Duron 1.4GHz
2. ASUS A7N8X Ver 2.0 DELUXE Gold - S462 - nForce 2 Ultra 400 + AXP 2000+
3. ASRock P4AL-800 - S478 - ULi® A800N chipset - needs caps
4. Intel i7-860 - SLBJJ + H57 Mobo + 4GB DDR3
5. QDI KinetiZ 7T - QDI K7V8363A/K7E-A - VIA KT133 - needs caps
6. MSI MS-6318, MED 2000 VERL2 - S370 - VIA Apollo Pro133A + CPU (I don't know the model yet) - needs caps
7. AOpen MX46 U2 - SiS 650GX SIS 962L + CPU ( I don't know the model yet) - needs caps
8. Hercules 3D Prophet 4500 64MB TV-OUT - Kyro II
9. AMD K6-2/300AFR
10. Intel Q6600 x2, Q8300, Q8400
11. Cyrix 486 DX4 100MHz - Cx486DX4-100GP
12. AXP 2000+ Palomino
13. Creative Labs – Creative Labs ct2290 Sound Blaster 16 SB16IDE - CT2291 - FCC ID:IBACT-SB16IDE
14. OCZ Platinum Edition PC2 8500 2x2GB 5-5-5@2.2V
15. OCZ PC2 5400 2x2GB
16. Labway Audio Sound Card LWHA151A00 A151-a00 16-bit ISA - YAMAHA YMF719E-S
17. MSI MS-8818 VER:10B - Geforce 2 MX
18. MSI 8800GTS - Zalman Cooler
19. ATI Mach64 VT4 PCI
20. AIW ATI 3D Rage PRO + VRAM ext.
21. Logitech C7-3F-9F mouse
22. Sealed NIB Iomega zip 250 - 3.5" internal
23. CD-ROM Plextor PX-54TA
24. Mushkin Enhanced 2x1GB PC6400
25. 10 MFM HDD cables - the wider ones. I still need to find the pair. (the slim one)
26. AXP 2400+ https://www.cpu-world.com/CPUs/K7/AMD-Athlon XP 2400+ - AXDA2400DKV3C.html 2GHz/266
27. No name ISA FDD/SER/PARALEL/IDE controller
28. Future Domain TMC-850MEX 8-BIT ISA SCSI CONTROLLER 01-00850-043-00 PC or Apple
 

Attachments

  • PRW-2021-248.jpg
    PRW-2021-248.jpg
    1.2 MB · Views: 82
  • PRW-2021-249.jpg
    PRW-2021-249.jpg
    2.5 MB · Views: 78
  • PRW-2021-250.jpg
    PRW-2021-250.jpg
    1.3 MB · Views: 80
  • PRW-2021-251.jpg
    PRW-2021-251.jpg
    1.9 MB · Views: 67
  • PRW-2021-252.jpg
    PRW-2021-252.jpg
    1.5 MB · Views: 82
  • PRW-2021-253.jpg
    PRW-2021-253.jpg
    556.4 KB · Views: 73
  • PRW-2021-254.jpg
    PRW-2021-254.jpg
    1.6 MB · Views: 73
  • PRW-2021-255.jpg
    PRW-2021-255.jpg
    2.2 MB · Views: 72
  • PRW-2021-256.jpg
    PRW-2021-256.jpg
    2.6 MB · Views: 82
  • PRW-2021-257.jpg
    PRW-2021-257.jpg
    2.7 MB · Views: 78
  • PRW-2021-258.jpg
    PRW-2021-258.jpg
    2.6 MB · Views: 73
  • PRW-2021-259.jpg
    PRW-2021-259.jpg
    649.5 KB · Views: 69
  • PRW-2021-260.jpg
    PRW-2021-260.jpg
    2 MB · Views: 68
  • PRW-2021-261.jpg
    PRW-2021-261.jpg
    1.8 MB · Views: 60
  • PRW-2021-262.jpg
    PRW-2021-262.jpg
    1.8 MB · Views: 69
  • PRW-2021-263.jpg
    PRW-2021-263.jpg
    2.6 MB · Views: 70
  • PRW-2021-264.jpg
    PRW-2021-264.jpg
    1.7 MB · Views: 73
  • PRW-2021-265.jpg
    PRW-2021-265.jpg
    2.3 MB · Views: 60
  • PRW-2021-266.jpg
    PRW-2021-266.jpg
    955.3 KB · Views: 82
  • PRW-2021-267.jpg
    PRW-2021-267.jpg
    893.6 KB · Views: 71
  • PRW-2021-268.jpg
    PRW-2021-268.jpg
    821 KB · Views: 75
  • PRW-2021-269.jpg
    PRW-2021-269.jpg
    140.6 KB · Views: 65
  • PRW-2021-270.jpg
    PRW-2021-270.jpg
    319.2 KB · Views: 71
Joined
Jul 24, 2021
Messages
449 (0.46/day)
Location
Tornado Alley
System Name Main W10
Processor i7 2700K
Motherboard Gig Z77 HD4
Cooling Xigmatech Tower Cooler
Memory 16 GB G-Skill 1600Mhz
Video Card(s) ASUS GTX 1080ti 11GB
Storage WD Gold 2 TB HD
Display(s) Acer 27" 1440P
Case Phanteks Enthoo Pro
Audio Device(s) JDS Labs Element DAC/AMP
Power Supply Rosewill Hive 650 watt
Mouse MX 518
Keyboard Cherry 3000 with Blues
I'm on a roll baby! :)

Fresh loot! Untested but who cares! The mobos need some caps but I'm not worried. Latelty Sk. A stuff has come in big numbers. My stash of KT133/A boards is growing fast. :)

1. AOpen AK73(A) - S462 - VIA KT133A + Duron 1.4GHz
2. ASUS A7N8X Ver 2.0 DELUXE Gold - S462 - nForce 2 Ultra 400 + AXP 2000+
3. ASRock P4AL-800 - S478 - ULi® A800N chipset - needs caps
4. Intel i7-860 - SLBJJ + H57 Mobo + 4GB DDR3
5. QDI KinetiZ 7T - QDI K7V8363A/K7E-A - VIA KT133 - needs caps
6. MSI MS-6318, MED 2000 VERL2 - S370 - VIA Apollo Pro133A + CPU (I don't know the model yet) - needs caps
7. AOpen MX46 U2 - SiS 650GX SIS 962L + CPU ( I don't know the model yet) - needs caps
8. Hercules 3D Prophet 4500 64MB TV-OUT - Kyro II
9. AMD K6-2/300AFR
10. Intel Q6600 x2, Q8300, Q8400
11. Cyrix 486 DX4 100MHz - Cx486DX4-100GP
12. AXP 2000+ Palomino
13. Creative Labs – Creative Labs ct2290 Sound Blaster 16 SB16IDE - CT2291 - FCC ID:IBACT-SB16IDE
14. OCZ Platinum Edition PC2 8500 2x2GB 5-5-5@2.2V
15. OCZ PC2 5400 2x2GB
16. Labway Audio Sound Card LWHA151A00 A151-a00 16-bit ISA - YAMAHA YMF719E-S
17. MSI MS-8818 VER:10B - Geforce 2 MX
18. MSI 8800GTS - Zalman Cooler
19. ATI Mach64 VT4 PCI
20. AIW ATI 3D Rage PRO + VRAM ext.
21. Logitech C7-3F-9F mouse
22. Sealed NIB Iomega zip 250 - 3.5" internal
23. CD-ROM Plextor PX-54TA
24. Mushkin Enhanced 2x1GB PC6400
25. 10 MFM HDD cables - the wider ones. I still need to find the pair. (the slim one)
26. AXP 2400+ https://www.cpu-world.com/CPUs/K7/AMD-Athlon XP 2400+ - AXDA2400DKV3C.html 2GHz/266
27. No name ISA FDD/SER/PARALEL/IDE controller
28. Future Domain TMC-850MEX 8-BIT ISA SCSI CONTROLLER 01-00850-043-00 PC or Apple
Hey, that's a great haul of cool hardware. I've got a few pairs of that OCZ Ram - nice stuff! I have 2 of the 8800GTS Nvidia cards w/640MB RAM (one is the MSI)
- nice cards
that have lasted forever.
 
Joined
Jul 5, 2013
Messages
25,559 (6.52/day)
I'm on a roll baby! :)

Fresh loot! Untested but who cares! The mobos need some caps but I'm not worried. Latelty Sk. A stuff has come in big numbers. My stash of KT133/A boards is growing fast. :)

1. AOpen AK73(A) - S462 - VIA KT133A + Duron 1.4GHz
2. ASUS A7N8X Ver 2.0 DELUXE Gold - S462 - nForce 2 Ultra 400 + AXP 2000+
3. ASRock P4AL-800 - S478 - ULi® A800N chipset - needs caps
4. Intel i7-860 - SLBJJ + H57 Mobo + 4GB DDR3
5. QDI KinetiZ 7T - QDI K7V8363A/K7E-A - VIA KT133 - needs caps
6. MSI MS-6318, MED 2000 VERL2 - S370 - VIA Apollo Pro133A + CPU (I don't know the model yet) - needs caps
7. AOpen MX46 U2 - SiS 650GX SIS 962L + CPU ( I don't know the model yet) - needs caps
8. Hercules 3D Prophet 4500 64MB TV-OUT - Kyro II
9. AMD K6-2/300AFR
10. Intel Q6600 x2, Q8300, Q8400
11. Cyrix 486 DX4 100MHz - Cx486DX4-100GP
12. AXP 2000+ Palomino
13. Creative Labs – Creative Labs ct2290 Sound Blaster 16 SB16IDE - CT2291 - FCC ID:IBACT-SB16IDE
14. OCZ Platinum Edition PC2 8500 2x2GB 5-5-5@2.2V
15. OCZ PC2 5400 2x2GB
16. Labway Audio Sound Card LWHA151A00 A151-a00 16-bit ISA - YAMAHA YMF719E-S
17. MSI MS-8818 VER:10B - Geforce 2 MX
18. MSI 8800GTS - Zalman Cooler
19. ATI Mach64 VT4 PCI
20. AIW ATI 3D Rage PRO + VRAM ext.
21. Logitech C7-3F-9F mouse
22. Sealed NIB Iomega zip 250 - 3.5" internal
23. CD-ROM Plextor PX-54TA
24. Mushkin Enhanced 2x1GB PC6400
25. 10 MFM HDD cables - the wider ones. I still need to find the pair. (the slim one)
26. AXP 2400+ https://www.cpu-world.com/CPUs/K7/AMD-Athlon XP 2400+ - AXDA2400DKV3C.html 2GHz/266
27. No name ISA FDD/SER/PARALEL/IDE controller
28. Future Domain TMC-850MEX 8-BIT ISA SCSI CONTROLLER 01-00850-043-00 PC or Apple
Is it strange that the three items that stand out to me the most are the Cyrix 486DX4-100, the Geforce 8800GTS with Zalman cooler and the Zip250 drive?
 
Joined
Jan 1, 2015
Messages
1,799 (0.53/day)
Location
EU
System Name Adison "Open Space" 19
Processor Intel Pentium II, 350MHz
Motherboard Chaintech 6BTM, Slot 1
Cooling SECC Cartridge
Memory 1x 64MB, PC100
Video Card(s) ATI Rage IIc AGP, Diamond Monster 3DII 12MB
Storage BTC BCD-40XH, Quantum Fireball 3.5 Series, EX6.4 GB
Display(s) LG StudioWorks 57M
Case Adison Midi Tower, ATX
Audio Device(s) Creative SoundBlaster 128
Power Supply Codegen 300W
Mouse Genius SlimStar 110, PS/2
Keyboard Genius SlimStar 110, PS/2
Software Microsoft Windows 98
Is it strange that the three items that stand out to me the most are the Cyrix 486DX4-100, the Geforce 8800GTS with Zalman cooler and the Zip250 drive?
Same here, except for Cyrix DX4. Both 8800GT and Iomega drive in retail package got my immediate attention :)
 
Top