• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

ABit IP35 mobo

Joined
Dec 26, 2005
Messages
188 (0.03/day)
Location
Central TX
Processor Athlon II X4 945 (AM3)
Motherboard MSI NF725GM-P43 micro
Cooling stock
Memory 8GB G.Skill Ripjaw (DDR3-1066)
Video Card(s) EVGA 9600GT
Storage Vertex 2 60GB SSD, WD 250GB Cavair
Display(s) Dual Asus 22"
Software Win7 (32 bit)
New build on a IP35...the board has a 4 pin Molex connector next to the PCIx-1 slot. Can this be used to connect a case fan if plugged into the PSU also (fan has male and female 4-pin...connect one to the PSU and the other to the mobo), or will the fan generate too much electrical noise for the mobo?
 

Attachments

  • IP35 circled.JPG
    IP35 circled.JPG
    57.9 KB · Views: 473
Last edited:

kwchang007

New Member
Joined
Jan 27, 2007
Messages
3,962 (0.63/day)
Location
Severn, MD, USA.
Processor C2D T7200@2 ghz vcore: .9875
Motherboard generic laptop board
Cooling fan control and antec notebook cooler
Memory 2 GBs@ 533 mhz ddr2
Video Card(s) x1400 mobile, overclocked: 526mhz core/ 882mhz ddr
Storage 120 GB@ 5400 rpm fujitsu
Display(s) 15.4" 1440x900
Audio Device(s) integrated
Software vista 32 bit home premium
New build on a IP35...the board has a 4 pin Molex connector next to the PCIx-1 slot. Can this be used to connect a case fan if plugged into the PSU also (fan has male and female 4-pin...connect one to the PSU and the other to the mobo), or will the fan generate too much electrical noise for the mobo?

That's for X-fire. If you're using X-fire...I would say use different molexs.
 

panchoman

Sold my stars!
Joined
Jul 16, 2007
Messages
9,595 (1.57/day)
Processor Amd Athlon X2 4600+ Windsor(90nm) EE(65W) @2.9-3.0 @1.45
Motherboard Biostar Tforce [Nvidia] 550
Cooling Thermaltake Blue Orb-- bunch of other fans here and there....
Memory 2 gigs (2x1gb) of patriot ddr2 800 @ 4-4-4-12-2t
Video Card(s) Sapphire X1950pro Pci-E x16 @stock@stock on stock
Storage Seagate 7200.11 250gb Drive, WD raptors (30/40) in Raid 0
Display(s) ANCIENT 15" sony lcd, bought it when it was like 500 bucks
Case Apevia X-plorer blue/black
Audio Device(s) Onboard- Why get an sound card when you can hum??
Power Supply Antec NeoHe 550-manufactured by seasonic -replacement to the discontinued smart power series
Software Windows XP pro SP2 -- vista is still crap
the molex connector onboard is for having your psu supply the pci bus with more power for x-fire, because the grafix cards are running out of power, and depend on the pci e cable + mobo power via the pci bus. and the pci bus requires the molex connector when doing crossfire because the bus starts running out of power.
 
Joined
Dec 5, 2006
Messages
7,704 (1.21/day)
System Name Back to Blue
Processor i9 14900k
Motherboard Asrock Z790 Nova
Cooling Corsair H150i Elite
Memory 64GB Corsair Dominator DDR5-6400 @ 6600
Video Card(s) EVGA RTX 3090 Ultra FTW3
Storage 4TB WD 850x NVME, 4TB WD Black, 10TB Seagate Barracuda Pro
Display(s) 1x Samsung Odyssey G7 Neo and 1x Dell u2518d
Case Lian Li o11 DXL w/custom vented front panel
Audio Device(s) Focusrite Saffire PRO 14 -> DBX DriveRack PA+ -> Mackie MR8 and MR10 / Senn PX38X -> SB AE-5 Plus
Power Supply Corsair RM1000i
Mouse Logitech G502x
Keyboard Corsair K95 Platinum
Software Windows 11 x64 Pro
Benchmark Scores 31k multicore Cinebench - CPU limited 125w
Its an extra power connector, and its not only for xfire as you will notice a IP35 only has 1 x16 slot..
 

kwchang007

New Member
Joined
Jan 27, 2007
Messages
3,962 (0.63/day)
Location
Severn, MD, USA.
Processor C2D T7200@2 ghz vcore: .9875
Motherboard generic laptop board
Cooling fan control and antec notebook cooler
Memory 2 GBs@ 533 mhz ddr2
Video Card(s) x1400 mobile, overclocked: 526mhz core/ 882mhz ddr
Storage 120 GB@ 5400 rpm fujitsu
Display(s) 15.4" 1440x900
Audio Device(s) integrated
Software vista 32 bit home premium
Its an extra power connector, and its not only for xfire as you will notice a IP35 only has 1 x16 slot..

XD thank you niko. Forgot all P35's don't have X-fire
 
Joined
Dec 26, 2005
Messages
188 (0.03/day)
Location
Central TX
Processor Athlon II X4 945 (AM3)
Motherboard MSI NF725GM-P43 micro
Cooling stock
Memory 8GB G.Skill Ripjaw (DDR3-1066)
Video Card(s) EVGA 9600GT
Storage Vertex 2 60GB SSD, WD 250GB Cavair
Display(s) Dual Asus 22"
Software Win7 (32 bit)
That's for X-fire. If you're using X-fire...I would say use different molexs.

Nope...using onboard sound for now....and no crossfire...this rig will be mainly for video editing...using it with E6600 Quad and 4GB G.Skill DDR2-800. Corsair's 520W modular PSU is swweeeet!
 

kwchang007

New Member
Joined
Jan 27, 2007
Messages
3,962 (0.63/day)
Location
Severn, MD, USA.
Processor C2D T7200@2 ghz vcore: .9875
Motherboard generic laptop board
Cooling fan control and antec notebook cooler
Memory 2 GBs@ 533 mhz ddr2
Video Card(s) x1400 mobile, overclocked: 526mhz core/ 882mhz ddr
Storage 120 GB@ 5400 rpm fujitsu
Display(s) 15.4" 1440x900
Audio Device(s) integrated
Software vista 32 bit home premium
Nope...using onboard sound for now....and no crossfire...this rig will be mainly for video editing...using it with E6600 Quad and 4GB G.Skill DDR2-800. Corsair's 520W modular PSU is swweeeet!

Well, if you got an extra molex....go and plug it in, couldn't hurt. But unless you're running alot of the expansion slots, you shouldn't have any problems.
 
Joined
Dec 26, 2005
Messages
188 (0.03/day)
Location
Central TX
Processor Athlon II X4 945 (AM3)
Motherboard MSI NF725GM-P43 micro
Cooling stock
Memory 8GB G.Skill Ripjaw (DDR3-1066)
Video Card(s) EVGA 9600GT
Storage Vertex 2 60GB SSD, WD 250GB Cavair
Display(s) Dual Asus 22"
Software Win7 (32 bit)
I'm a noob

XD thank you niko. Forgot all P35's don't have X-fire

I didn't even think thru what you were saying...I saw X-fire, thought you meant X-Fi (sound card) not crossfire....been a long week.. thanks to all for that input.

So the extra power connector is to supply extra for the PCI-X bus as needed for crossfire support. Since my board doesn't have crossfire capability, does my original question stand? :wtf:Or will a fan send too much noise into the PCI-X bus?
 
Joined
Dec 26, 2005
Messages
188 (0.03/day)
Location
Central TX
Processor Athlon II X4 945 (AM3)
Motherboard MSI NF725GM-P43 micro
Cooling stock
Memory 8GB G.Skill Ripjaw (DDR3-1066)
Video Card(s) EVGA 9600GT
Storage Vertex 2 60GB SSD, WD 250GB Cavair
Display(s) Dual Asus 22"
Software Win7 (32 bit)
Well, if you got an extra molex....go and plug it in, couldn't hurt. But unless you're running alot of the expansion slots, you shouldn't have any problems.

I'll give it a try...I have pleenty of connectors...just trying to keep to case tidy with minimal cabling
 
Joined
Dec 5, 2006
Messages
7,704 (1.21/day)
System Name Back to Blue
Processor i9 14900k
Motherboard Asrock Z790 Nova
Cooling Corsair H150i Elite
Memory 64GB Corsair Dominator DDR5-6400 @ 6600
Video Card(s) EVGA RTX 3090 Ultra FTW3
Storage 4TB WD 850x NVME, 4TB WD Black, 10TB Seagate Barracuda Pro
Display(s) 1x Samsung Odyssey G7 Neo and 1x Dell u2518d
Case Lian Li o11 DXL w/custom vented front panel
Audio Device(s) Focusrite Saffire PRO 14 -> DBX DriveRack PA+ -> Mackie MR8 and MR10 / Senn PX38X -> SB AE-5 Plus
Power Supply Corsair RM1000i
Mouse Logitech G502x
Keyboard Corsair K95 Platinum
Software Windows 11 x64 Pro
Benchmark Scores 31k multicore Cinebench - CPU limited 125w
Yup I have a IP35-E and I have it plugged in just for the heck of it, that makes sure I have even MORE power going to the board, especially being its in a machine with 2 12v rails.

I am certain I don't "need" the extra power, but its there might as well take it if it needs it.
 
Joined
May 6, 2005
Messages
2,792 (0.40/day)
Location
Tre, Suomi Finland
System Name Ladpot ◦◦◦ Desktop
Processor R7 5800H ◦◦◦ i7 4770K, watercooled
Motherboard HP 88D2 ◦◦◦ Asus Z87-C2 Maximus VI Formula
Cooling Mixed gases ◦◦◦ Fuzion V1, MCW60/R2, DDC1/DDCT-01s top, PA120.3, EK200, D12SL-12, liq.metal TIM
Memory 2× 8GB DDR4-3200 ◦◦◦ 2× 8GB Crucial Ballistix Tactical LP DDR3-1600
Video Card(s) RTX 3070 ◦◦◦ heaps of dead GPUs in the garage
Storage Samsung 980 PRO 2TB ◦◦◦ Samsung 840Pro 256@178GB + 4× WD Red 2TB in RAID10 + LaCie Blade Runner 4TB
Display(s) HP ZR30w 30" 2560×1600 (WQXGA) H2-IPS
Case Lian Li PC-A16B
Audio Device(s) Onboard
Power Supply Corsair AX860i
Mouse Logitech MX Master 2S / Contour RollerMouse Red+
Keyboard Logitech Elite Keyboard from 2006 / Contour Balance Keyboard / Logitech diNovo Edge
Software W11 x64 ◦◦◦ W10 x64
Benchmark Scores It does boot up? I think.
New build on a IP35...the board has a 4 pin Molex connector next to the PCIx-1 slot. Can this be used to connect a case fan if plugged into the PSU also (fan has male and female 4-pin...connect one to the PSU and the other to the mobo), or will the fan generate too much electrical noise for the mobo?
Since nobody has actually answered his question:
Yes.

You can power a fan using the on-board molex between "PCI1" and "PCIEXP2". You could use it to power a fan even without the y-splitter.
It's not "meant" to be used as power output point but it would work since those pins are directly connected into the ATX24 connector.
 
Joined
May 19, 2007
Messages
7,662 (1.24/day)
Location
c:\programs\kitteh.exe
Processor C2Q6600 @ 1.6 GHz
Motherboard Anus PQ5
Cooling ACFPro
Memory GEiL2 x 1 GB PC2 6400
Video Card(s) MSi 4830 (RIP)
Storage Seagate Barracuda 7200.10 320 GB Perpendicular Recording
Display(s) Dell 17'
Case El Cheepo
Audio Device(s) 7.1 Onboard
Power Supply Corsair TX750
Software MCE2K5
my abit ab9 pro has teh same plug .. its to help stability of video cards, no u cant plug a casefan there ... btw how many fan headers does ur board have @ OP?
 
Joined
May 6, 2005
Messages
2,792 (0.40/day)
Location
Tre, Suomi Finland
System Name Ladpot ◦◦◦ Desktop
Processor R7 5800H ◦◦◦ i7 4770K, watercooled
Motherboard HP 88D2 ◦◦◦ Asus Z87-C2 Maximus VI Formula
Cooling Mixed gases ◦◦◦ Fuzion V1, MCW60/R2, DDC1/DDCT-01s top, PA120.3, EK200, D12SL-12, liq.metal TIM
Memory 2× 8GB DDR4-3200 ◦◦◦ 2× 8GB Crucial Ballistix Tactical LP DDR3-1600
Video Card(s) RTX 3070 ◦◦◦ heaps of dead GPUs in the garage
Storage Samsung 980 PRO 2TB ◦◦◦ Samsung 840Pro 256@178GB + 4× WD Red 2TB in RAID10 + LaCie Blade Runner 4TB
Display(s) HP ZR30w 30" 2560×1600 (WQXGA) H2-IPS
Case Lian Li PC-A16B
Audio Device(s) Onboard
Power Supply Corsair AX860i
Mouse Logitech MX Master 2S / Contour RollerMouse Red+
Keyboard Logitech Elite Keyboard from 2006 / Contour Balance Keyboard / Logitech diNovo Edge
Software W11 x64 ◦◦◦ W10 x64
Benchmark Scores It does boot up? I think.
Joined
Dec 5, 2006
Messages
7,704 (1.21/day)
System Name Back to Blue
Processor i9 14900k
Motherboard Asrock Z790 Nova
Cooling Corsair H150i Elite
Memory 64GB Corsair Dominator DDR5-6400 @ 6600
Video Card(s) EVGA RTX 3090 Ultra FTW3
Storage 4TB WD 850x NVME, 4TB WD Black, 10TB Seagate Barracuda Pro
Display(s) 1x Samsung Odyssey G7 Neo and 1x Dell u2518d
Case Lian Li o11 DXL w/custom vented front panel
Audio Device(s) Focusrite Saffire PRO 14 -> DBX DriveRack PA+ -> Mackie MR8 and MR10 / Senn PX38X -> SB AE-5 Plus
Power Supply Corsair RM1000i
Mouse Logitech G502x
Keyboard Corsair K95 Platinum
Software Windows 11 x64 Pro
Benchmark Scores 31k multicore Cinebench - CPU limited 125w
*sigh*

Yes he can...
:rolleyes:

Well I can't say much for the fan plugin itself didn't bother trying... But I have one of those silly bridge connectors on my fan molex, so I just put it between the board and my psu connection to the mainboard no issues..

Simple- Give it power because you can, can't ever have "too" many amps available. Then if you want sure put a fan on the same connector.
 
Top