Super Pi 1m scores

[Deleted member 24505]

d44ve you likkle cheater

edit--if my chip will do 4ghz at 1.5625v,would it need a large increase in vcore to go higher? say from 4ghz to 4.1ghz? itried 1.57vcore and it nearly got to windows,it did the blue bar going across and blue screened before windows booted.is it my ram or vcore not high enuff?

 

[Tatty_Two]

Competition? Last time I checked I way waaaayyyy ahead of you !

Lol I am on 12.296, but have near on another 100Mhz to go yet, he has just not updated for a while, check post a couple of pages ago.

 

[DOM]

d44ve you likkle cheater

edit--if my chip will do 4ghz at 1.5625v,would it need a large increase in vcore to go higher? say from 4ghz to 4.1ghz? itried 1.57vcore and it nearly got to windows,it did the blue bar going across and blue screened before windows booted.is it my ram or vcore not high enuff?

I think you need more and did you up your NB, cuz what temps are you getting in the bios with 1.57vcore I would at least try 1.6v+ cuz the GO have 100c Tjunction

 

[Deleted member 24505]

is that safe tho'? the temps here tonight are really cold,my cpu is at 31c idle on 3.6/1.425vcore.its not gonna blow my chip is it?

also i upped the nb to 1.7v so i could try that higher,the temp should be ok as it is cold.

heres my settings for 4ghz,what do i need to try changing?

FSB STRAP TO NB-333
FSB FREQUENCY-500
PCI-E FREQUENCY-101
DRAM FREQUENCY-1000
DRAM COMMAND RATE-2T
DRAM TIMING CONTROL-MANUAL
TRANSACTION BOOSTER-AUTO
CLOCK OVERCHARGING MODE-AUTO
CPU SPREAD SPECTRUM-DISABLED
PCI-E SPREAD SPECTRUM-DISABLED
CPU VOLTAGE-1.5625V
CPU VOLTAGE REFERANCE-0.63X
CPU VOLTAGE DAMPER-ENABLED
cpu pll voltage-1.50v
dram voltage-2.25v
fsb termination voltage-1.3
north bridge voltage-1.4v
nb voltage referance-auto
sb voltage auto

 

[DOM]

lol well some of those settings I dont even know what there for but I would up the v-core to at least 1.6v or 1.65v and up the NB and set the SB but what settings do you have for the SB and you wont blow your chip ive tryed 1.6v+ on air but that was in winter time and I maxed with my water setup with vdroop 1.68v

 

[Deleted member 24505]

i left the sb on auto,i dont know what it is stock.i will try it tho'

at 1.56vcore the temps running sm2 were 59c max,will it be ok if it goes over that?

damn its cold tonite here.

 

[DOM]

yeah Thermal Specification: 72°C mine is 61.4°C

 

[Deleted member 24505]

heres what i tried-
FSB STRAP TO NB-333
FSB FREQUENCY-510
PCI-E FREQUENCY-101
DRAM FREQUENCY-1020
DRAM COMMAND RATE-2T
DRAM TIMING CONTROL-MANUAL
TRANSACTION BOOSTER-1
CLOCK OVERCHARGING MODE-0.7v
CPU SPREAD SPECTRUM-DISABLED
PCI-E SPREAD SPECTRUM-DISABLED
CPU VOLTAGE-1.58V
CPU VOLTAGE REFERANCE-0.63X
CPU VOLTAGE DAMPER-ENABLED
cpu pll voltage-1.90v
dram voltage-2.3v
fsb termination voltage-1.4v
north bridge voltage-1.8v
nb voltage referance-0.63x
sb voltage 1.2v
mem-
5.5.5.15

still no go,blue screen every time,i just darent try the vcore as high as 1.6v

 

[DOM]

what are the settings for the SB ?

 

[Tatty_Two]

But "on die" thermal throttling starts at 60C Tcase on the G0's.

 

[Deleted member 24505]

the sb voltage options are-1.05v/1.2v

maybe 4ghz/500fsb is the limit on the chip or board?

i could try lowering the multi to see how high the fsb will go?

 

[DOM]

wow that some low SB volts not like the p5b 1.8v

why not try 1.6v

 

[d44ve]

wow that some low SB volts not like the p5b 1.8v

why not try 1.6v

Are you sure you are not confusing the SB with the NB?

I have never seen a SB that needs to goto 1.8

and on his board all he can goto is 1.2v

 

[Deleted member 24505]

maybe the ich9 doesnt need such high voltage?

is there any way to find out what its at on auto?

i will try it at 1.59 and 1.6v before i go to bed.i am also gonna lower the multi and see how high the fsb will go.

 

[Deleted member 24505]

have you got any ideas on this d44ve?

why wont my chip get to windows at 510 fsb? anothers input might help.

thx

 

[DOM]

Are you sure you are not confusing the SB with the NB?

I have never seen a SB that needs to goto 1.8

and on his board all he can goto is 1.2v

lol no im not my NB only goes to 1.65v SB 1.8v thats why I put wb on both

 

[DOM]

have you got any ideas on this d44ve?

why wont my chip get to windows at 510 fsb? anothers input might help.

thx

might want to ask giorgos th. he has a Αsus P5K Deluxe Wi-Fi/AP

 

[Mediocre]

tigger, fyi I get some screwy stuff with my pci frequency and my 'best' oc.

With my (vanilla) P5K I hit a wall around 450 where it wouldn't even post (kinda different than you)...All I changed was pci frequency to 105 (or higher, I only dared to try upto 109) and the wall went away...(still can't boot windows, but I can post at 480x9 I've got redneck cooling coming this winter...probably january)...so anyway, pci to 105 or 106, see if that help...

 

[Tatty_Two]

I think the max limit on the board for southbridge is 1.2V and the "auto" setting gives 1.0V.

 

[Deleted member 24505]

thanks for the input mediocre,i will try that.

 

[Deleted member 24505]

so is the auto setting always the lowest option? apart from the vcore.

 

[d44ve]

lol no im not my NB only goes to 1.65v SB 1.8v thats why I put wb on both

And you run you SB @ 1.8v?


-not questioning you.... whatever works for you. I have just never had\seen anyone have to go that high

 

[Tatty_Two]

so is the auto setting always the lowest option? apart from the vcore.

Usually yes, I was a little out tho, to be more specific, the settings are:

Auto - 0.95V
1.05V
1.20V

I just rang my friend in Birmingham, he has the same board as you and he is a serious geek, he knows these things off by heart. He also said that he had a similar problem with his 6850 and thinks there is a FSB wall on the G0 dual cores, once he got to about 508-510 FSB he was fine with no probs, he is guessing that if there is a wall it is about 498-506 or 507.

Edit: Lol........to avoid confusion, he runs his 6850 on a 8x multi

 

[DOM]

And you run you SB @ 1.8v?


-not questioning you.... whatever works for you. I have just never had\seen anyone have to go that high

lol its kool naw I use it that high only when benching I use the lowest for 24/7 and 1.45v NB for 4:5 on the MEM but I can use lowest on both at 450X8 and mem at 1:1

Cuz thats the only way to max out my cpu and be able to bench at 470X8 thats why I want a E6850 or 6750 to see if its the mobo or CPU thats wont let me get more

 

[Deleted member 24505]

i might try 515fsb tatty and see if it will post that high,maybe 520.i will try lowering the multi and see if it will pass 510 too.