DaMulta
My stars went supernova
- Joined
- Aug 3, 2006
- Messages
- 16,168 (2.50/day)
- Location
- Oklahoma T-Town
System Name | Work in progress |
---|---|
Processor | AMD 955---4Ghz |
Motherboard | MSi GD70 |
Cooling | OcZ Phase/water |
Memory | Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000 |
Video Card(s) | CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz |
Storage | SSD 64GB |
Display(s) | Envision 24'' 1920x1200 |
Case | Using the desk ATM |
Audio Device(s) | Sucky onboard for now :( |
Power Supply | 1000W TruePower Quattro |
So the plan is to take my 17 volt 188watt TEC VGA block and use it on my new AMD Black 5000.
The chip is brand new and has only been on for about 10 mins tops under normal conditions.
The chip is brand new and has only been on for about 10 mins tops under normal conditions.
This is what I used on the motherboard
This is the back of the motherboad before
First coat
The front before hand"As you can see I'M LEARNING SOME NEW CAMERA SETTINGS"
But I also tried some others....
After the coat
This is what when on top of the eletrical dip
top This has two layers of tape, and 3 around the CPU.
This is what I like to call the crazy scray part of the whole thing"de-electrical Grease"
I should of gotten more pics of this. I used the original HSF holder and cut some hevey card board to fit for this. It is on very tight BTW.
Cover the back again
Due to me being on a generator tonight, so there will be no testing:shadedshu
Lost power tonight with a storm that blew in. Plus I don't have the relay in, and
that will be in ASAP.
Lost power tonight with a storm that blew in. Plus I don't have the relay in, and
that will be in ASAP.
Last edited: