Mediocre
New Member
- Joined
- Jun 11, 2006
- Messages
- 1,237 (0.19/day)
Processor | C2D E8400 @ 3.60GHz |
---|---|
Motherboard | ASUS P5Q-Pro w/ extra Vreg HS |
Cooling | Apogee GTX, 2x120mm DD, MCP-1000P Res/Pump, all 3/8" 7x80mm (4x push/pull, 2x exhaust, 1x side) |
Memory | 2 x 1GB Corsair Dominator DDR2 1066 @ 800 (4-3-3-6) |
Video Card(s) | EVGA 9800GTX+ |
Storage | 3 x 80 GB WD SATA300 (2x RAID 0) |
Display(s) | Scepter x37 1080p 37" LCD & Samsung 204B |
Case | CoolerMaster HAF932 |
Audio Device(s) | Onboard |
Power Supply | Mushkin HP-580AP (C/O TPU!) |
Software | Vista Ultimate (32-bit) |
@ hookey, hello matey was desperate to catch your gtx but it aint gonna happen.
@ trt740 not tried to up the voltages, i wasnt sure what to tweek and figured at 940mhz the ram may be the cause of the resets beyond the current settings will have another go when i put some 1066mhz in. I'd forgotten how much fun overclocking could be, mmmmm then i remembered the tears when it all goes bad..... well i'm gonna quit while stuff still works
FYI, in my experience, RAM problems result in a LOCKUP, CPU issues result in a reboot out of no where...Even with the new 2900 pro, clock the memory too high and it freezes, clock the gpu core too high and it reboots...might just be me