- Joined
- May 24, 2007
- Messages
- 5,406 (0.87/day)
- Location
- Tennessee
System Name | AM5 |
---|---|
Processor | AMD Ryzen R9 7950X |
Motherboard | Asrock X670E Taichi |
Cooling | EK AIO Basic 360 |
Memory | Corsair Vengeance DDR5 5600 64 Gb - XMP1 Profile |
Video Card(s) | AMD Reference 7900 XTX 24 Gb |
Storage | Samsung Gen 4 980 1 TB / Samsung 8TB SSD |
Display(s) | Samsung 34" 240hz 4K |
Case | Fractal Define R7 |
Power Supply | Seasonic PRIME PX-1300, 1300W 80+ Platinum, Full Modular |
Weird problem is happening with my computer...
When I turn the computer on it comes on for 3 seconds and then automatically shuts off (I can try this as many times as I want still never works).
When I remove the battery from the mobo it and put it back in about 5 mins later, the computer will start and then load to the POST SCREEN saying:
Load system with:
Defaults
Last known Good
The thing is if I click default the computer restarts and then turns off (doesn't work after this, goes back to the same problem as above). When I click last known good it won't work at all.
I just recently took my water cool out and I was having this same problem before, but when I would click last known good it the cmos would go back to 2.66 GHz OC with all the other settings I had and would work fine. Unfortunately, I'm using my stock heatsink now so I can't run the CPU at 2.66 GHz, therefore I can't get the computer to start.
What could be the problem?
When I turn the computer on it comes on for 3 seconds and then automatically shuts off (I can try this as many times as I want still never works).
When I remove the battery from the mobo it and put it back in about 5 mins later, the computer will start and then load to the POST SCREEN saying:
Load system with:
Defaults
Last known Good
The thing is if I click default the computer restarts and then turns off (doesn't work after this, goes back to the same problem as above). When I click last known good it won't work at all.
I just recently took my water cool out and I was having this same problem before, but when I would click last known good it the cmos would go back to 2.66 GHz OC with all the other settings I had and would work fine. Unfortunately, I'm using my stock heatsink now so I can't run the CPU at 2.66 GHz, therefore I can't get the computer to start.
What could be the problem?