Name Change
New Member
- Joined
- Jun 8, 2005
- Messages
- 19 (0.00/day)
Which clocks should I change in RBE only 3d high or 3d high and low to same oc... When i change only 3d high my clocks don;t change... This in my stock clocks...
Hi, you have a nice tool there.
I have this Card, http://geizhals.at/deutschland/?a=294666&t=alle&plz=&va=nachnahme&vl=de&v=l#filterform
with the attached Bios
and i have these problem
My Card have an Fan Control, but i can´t go under 30%.
Sorry for Quote, but nobody answered me.
Try v1.08. If it doesn't work, wait for v1.09.
System Name | money pit.. |
---|---|
Processor | Intel 9900K 4.8 at 1.152 core voltage minus 0.120 offset |
Motherboard | Asus rog Strix Z370-F Gaming |
Cooling | Dark Rock TF air cooler.. Stock vga air coolers with case side fans to help cooling.. |
Memory | 32 gb corsair vengeance 3200 |
Video Card(s) | Palit Gaming Pro OC 2080TI |
Storage | 150 nvme boot drive partition.. 1T Sandisk sata.. 1T Transend sata.. 1T 970 evo nvme m 2.. |
Display(s) | 27" Asus PG279Q ROG Swift 165Hrz Nvidia G-Sync, IPS.. 2560x1440.. |
Case | Gigabyte mid-tower.. cheap and nothing special.. |
Audio Device(s) | onboard sounds with stereo amp.. |
Power Supply | EVGA 850 watt.. |
Mouse | Logitech G700s |
Keyboard | Logitech K270 |
Software | Win 10 pro.. |
Benchmark Scores | Firestike 29500.. timepsy 14000.. |
Hi,
I have a problem with 3850 AGP card. PowerColor card use good cooling system and that's why i bought this card (not Sapphire one). But then i realized it could be mistake. Fan is constantly working at 100%. It's sounds like a small hair dryier. From the other hand GPU has always temperature below 55 C... but i don't need that. Even in 2D mode fan works at 100%! Radiator is big and made of copper and fan is also big, so it hasn't work as fast as it is. Could RBE help with that? Unfortunately i'm a modding noob (have never changed BIOS).
This is problem has every user of this card... so fixing/changing this would be a great thing...
okay, V1.08 doensn´t work, i can fix the fancontrol, but the Fan doesn´t go under 30%. Did you need a Bios from my GeCube Card to Fix this ?
Processor | i9 10900x @ 4.6 GHz w/ 1.266 V |
---|---|
Motherboard | Asus Prime x299 - Deluxe |
Cooling | 320 (x2) and 220 (x2) Rads single loop w/ ML120 pros (x12) ML140 pros (x3) |
Memory | G.Skill Trident (4x8) DDR4-4000 CL15 @ 1.50V |
Video Card(s) | EVGA FTW3 3080 Ti @ 1900 MHz w/ 900 mV |
Storage | Samsung 970 500 GB & 1 TB NVME's |
Display(s) | Dell 27" 144Hz (x2) |
Case | TT Core x71 |
Power Supply | Corsair RM1000x |
Hi,
I have a problem with 3850 AGP card. PowerColor card use good cooling system and that's why i bought this card (not Sapphire one). But then i realized it could be mistake. Fan is constantly working at 100%. It's sounds like a small hair dryier. From the other hand GPU has always temperature below 55 C... but i don't need that. Even in 2D mode fan works at 100%! Radiator is big and made of copper and fan is also big, so it hasn't work as fast as it is. Could RBE help with that? Unfortunately i'm a modding noob (have never changed BIOS).
This is problem has every user of this card... so fixing/changing this would be a great thing...
System Name | Ryzen5900X |
---|---|
Processor | AMD Ryzen 5900X |
Motherboard | Gigabyte B550 AORUS PRO AC |
Cooling | NZXT Kraken X62 |
Memory | 4x G.Skill F4-3600C17D-8GTZ |
Video Card(s) | AMD Radeon RX 6800XT Midnight Black |
I got a smilair problem with RBE 1.09. I can't get the fan speed at min 30%
System Name | Ryzen5900X |
---|---|
Processor | AMD Ryzen 5900X |
Motherboard | Gigabyte B550 AORUS PRO AC |
Cooling | NZXT Kraken X62 |
Memory | 4x G.Skill F4-3600C17D-8GTZ |
Video Card(s) | AMD Radeon RX 6800XT Midnight Black |
What card do you have and did that happen with older RBE versions as well?
I have a (Build By ATI/RED PCB/DUAL SLOT) Sapphire HD3870. With the older version I lowered the thresshold to 55 degrees and it worked. I didn't try this with the newer version. I only tried to raise the min fan speed. I first tried 30% and a reboot later I tried 50%. 50%must create some more noise and lower the temps. Temps are also the same like before
System Name | Ryzen5900X |
---|---|
Processor | AMD Ryzen 5900X |
Motherboard | Gigabyte B550 AORUS PRO AC |
Cooling | NZXT Kraken X62 |
Memory | 4x G.Skill F4-3600C17D-8GTZ |
Video Card(s) | AMD Radeon RX 6800XT Midnight Black |
Processor | AMD 3900X \ AMD 7700X |
---|---|
Motherboard | ASRock AM4 X570 Pro 4 \ ASUS X670Xe TUF |
Cooling | D15 |
Memory | Patriot 2x16GB PVS432G320C6K \ G.Skill Flare X5 F5-6000J3238F 2x16GB |
Video Card(s) | eVga GTX1060 SSC \ XFX RX 6950XT RX-695XATBD9 |
Storage | Sammy 860, MX500, Sabrent Rocket 4 Sammy Evo 980 \ 1xSabrent Rocket 4+, Sammy 2x990 Pro |
Display(s) | Samsung 1080P \ LG 43UN700 |
Case | Fractal Design Pop Air 2x140mm fans from Torrent \ Fractal Design Torrent 2 SilverStone FHP141x2 |
Audio Device(s) | Yamaha RX-V677 \ Yamaha CX-830+Yamaha MX-630 Infinity RS4000\Paradigm P Studio 20, Blue Yeti |
Power Supply | Seasonic Prime TX-750 \ Corsair RM1000X Shift |
Mouse | Steelseries Sensei wireless \ Steelseries Sensei wireless |
Keyboard | Logitech K120 \ Wooting Two HE |
Benchmark Scores | Meh benchmarks. |
What was the matter? Can you explain a little more?
You should try v1.08. I's completely rewritten!
System Name | old school / new school |
---|---|
Processor | 3.0e C0 @ 3.6 / e5200 |
Motherboard | p4p800e-dlx / p5q-DLX |
Cooling | custom water see sig / air |
Memory | 2x1g oczPC4000EbPl / 2x2g ocz2rpr1066 |
Video Card(s) | 3850AGP / 4890vaporX |
Storage | 36g raptor+120g wd / wd 1001fals 1tb |
Display(s) | BenQ / sharpAQUOS LC-37D64U |
Case | modded antec plusview / generic |
Audio Device(s) | audigy 2zs / ASUS Xonar HDAV1.3 |
Power Supply | fan/cable modded powerstream 520 / OCZ 700mxsp |
Software | Xp pro SP2 / VISTA ultimate OEM |
Any possible mods for 3850 AGP cards?
@TIM_HKG
You only need to change the State 2 - mode 3 - "high 3D" speeds. Your Powerplay stays the same except that your card is running 830/1200 in 3D mode
Tried with RBE 1.09, x1950pro AGP version. I saved the bios with Atiwinflash 2.0.0.7
I receive this error message:
Thanx!