• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Naturally Aspired PC WaterCooling Club

Joined
Jan 8, 2008
Messages
1,941 (0.33/day)
Location
Pleasant Prairie, WI
System Name File Server
Processor 2600k
Motherboard idk
Cooling H110
Memory 20gb of something
Video Card(s) onboard!
Storage 2x120 SSD, (5x8tb)+(3x4tb) = 35 TB Z1 pool
Display(s) couple 4k 32s
Case cooler master something i think
Audio Device(s) does anyone bother with anything but onboard?
Power Supply Whatever OCZ PC Powercooling became. 1200 modular setup
Mouse MX Master 2x
Keyboard G710
Software FreeNAS
Serial or Parallel?

one continous loop,

Starts at the pump, then to the 320, then the 220, then the 2 video cards, then the proc, then the rez.

Im thinking of re-doing it with a better layout and adding another pump to the mix and breaking apart the radz. Im not to happy with the temps on my proc, dont get me wrong, they are not horrible, just not ideal.

33 idle, 48 load. Sometimes the cores can get into the 60s with a full load on the GPUs also.

Its time I break apart the system anyways, my videocards are voltmodded now and dumping more heat in the mix than before. So its time to re-do the water. Ive been thinkin of adding TEC for the proc.
 

EastCoasthandle

New Member
Joined
Apr 21, 2005
Messages
6,885 (1.00/day)
System Name MY PC
Processor E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard Maximus Formula
Cooling D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory XMS 8500C5D @ 1066MHz
Video Card(s) HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage 2
Display(s) 24"
Case P180
Audio Device(s) X-fi Plantinum
Power Supply Silencer 750
Software XP Pro SP3 to Windows 7
Benchmark Scores This varies from one driver to another.
one continous loop,

Starts at the pump, then to the 320, then the 220, then the 2 video cards, then the proc, then the rez.

Im thinking of re-doing it with a better layout and adding another pump to the mix and breaking apart the radz. Im not to happy with the temps on my proc, dont get me wrong, they are not horrible, just not ideal.

33 idle, 48 load. Sometimes the cores can get into the 60s with a full load on the GPUs also.

Its time I break apart the system anyways, my videocards are voltmodded now and dumping more heat in the mix than before. So its time to re-do the water. Ive been thinkin of adding TEC for the proc.

I would add another pump for 2 rads of those sizes thus creating 2 loops. You should notice reduced temps by doing so. Most 2/3 fan rads setups need their own pump from what I've seen so far.
 
Joined
Jan 8, 2008
Messages
1,941 (0.33/day)
Location
Pleasant Prairie, WI
System Name File Server
Processor 2600k
Motherboard idk
Cooling H110
Memory 20gb of something
Video Card(s) onboard!
Storage 2x120 SSD, (5x8tb)+(3x4tb) = 35 TB Z1 pool
Display(s) couple 4k 32s
Case cooler master something i think
Audio Device(s) does anyone bother with anything but onboard?
Power Supply Whatever OCZ PC Powercooling became. 1200 modular setup
Mouse MX Master 2x
Keyboard G710
Software FreeNAS
I would add another pump for 2 rads of those sizes thus creating 2 loops. You should notice reduced temps by doing so. Most 2/3 fan rads setups need their own pump from what I've seen so far.

Thanks for the tip!

my pump is a mcp355 with a petra top, the thing has some crazy head! It has been very good to me, however, I still plan to add a pump and make 2 seperate loops
 

EastCoasthandle

New Member
Joined
Apr 21, 2005
Messages
6,885 (1.00/day)
System Name MY PC
Processor E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard Maximus Formula
Cooling D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory XMS 8500C5D @ 1066MHz
Video Card(s) HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage 2
Display(s) 24"
Case P180
Audio Device(s) X-fi Plantinum
Power Supply Silencer 750
Software XP Pro SP3 to Windows 7
Benchmark Scores This varies from one driver to another.
Thanks for the tip!

my pump is a mcp355 with a petra top, the thing has some crazy head! It has been very good to me, however, I still plan to add a pump and make 2 seperate loops

No problem just use the 220 for the CPU and the 320 for the 2 video cards and you should be good to go. Post your results when you finally get it done!
 
Joined
Feb 7, 2008
Messages
682 (0.12/day)
Location
Barcelona, Catalonia, Spain
System Name The Phoenix (rev. 3.0)
Processor Intel Core i9 9900K @ 4.9GHz (1.18V)
Motherboard ASUS TUF Z390 PRO-GAMING
Cooling Custom Full Loop w/EKWB & Swiftech components
Memory 32GB Corsair Vengeance RGB Pro 3200MHz (C15)
Video Card(s) MSI GTX 1080 SeaHawk X EK @ 2.15GHz/5.5GHz
Storage Samsung 970 EVO+ (2x500GB) + Toshiba X300 (4TB)
Display(s) LG 29UM65-P (2560x1080 @ 75 Hz)
Case Thermaltake Core V51
Audio Device(s) Razer Kraken 7.1 & Scarlett 2i4 w/M-AUDIO BX5-D2
Power Supply Corsair RM750 (ver. 2019)
Mouse Logitech G700s
Keyboard Razer Blackwidow Chroma V2
Software MacOS 10.13.6 "High Sierra" & Windows 10 Pro x64
After talking with fitseries3 a bit more, he's telling to me (as the shop guy did) that it's best to have the bigger flow on my block ... so the 1st loop will be the best yet, running rad back to back.

Do you agree with my first intuition, fit's and shop guy recommendation?

I don't want to be draining and filling testing and/or searching my best setup now, since both tasks are a pain in the ass ... i prefer just to be sure with your advice and mount it and leave it for a few months.
 

Fitseries3

Eleet Hardware Junkie
Joined
Oct 6, 2007
Messages
15,508 (2.58/day)
Location
Republic of Texas
Pump > Cpu > Rad > Rad > Res > V
^--------------------------------
 

EastCoasthandle

New Member
Joined
Apr 21, 2005
Messages
6,885 (1.00/day)
System Name MY PC
Processor E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard Maximus Formula
Cooling D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory XMS 8500C5D @ 1066MHz
Video Card(s) HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage 2
Display(s) 24"
Case P180
Audio Device(s) X-fi Plantinum
Power Supply Silencer 750
Software XP Pro SP3 to Windows 7
Benchmark Scores This varies from one driver to another.
After talking with fitseries3 a bit more, he's telling to me (as the shop guy did) that it's best to have the bigger flow on my block ... so the 1st loop will be the best yet, running rad back to back.

Do you agree with my first intuition, fit's and shop guy recommendation?

What is bigger flow on my block? In any case I stand by what I posted earlier. Per my own experience I found better results with a single PA 120.3 then I did with a 2 fan and single fan rad.
 

Fitseries3

Eleet Hardware Junkie
Joined
Oct 6, 2007
Messages
15,508 (2.58/day)
Location
Republic of Texas
he's only cooling the CPU for now.
 

EastCoasthandle

New Member
Joined
Apr 21, 2005
Messages
6,885 (1.00/day)
System Name MY PC
Processor E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard Maximus Formula
Cooling D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory XMS 8500C5D @ 1066MHz
Video Card(s) HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage 2
Display(s) 24"
Case P180
Audio Device(s) X-fi Plantinum
Power Supply Silencer 750
Software XP Pro SP3 to Windows 7
Benchmark Scores This varies from one driver to another.
Doesn't matter...besides it's counterintuitive to use 2 separate rads for just 1 cpu.
 
Joined
Feb 7, 2008
Messages
682 (0.12/day)
Location
Barcelona, Catalonia, Spain
System Name The Phoenix (rev. 3.0)
Processor Intel Core i9 9900K @ 4.9GHz (1.18V)
Motherboard ASUS TUF Z390 PRO-GAMING
Cooling Custom Full Loop w/EKWB & Swiftech components
Memory 32GB Corsair Vengeance RGB Pro 3200MHz (C15)
Video Card(s) MSI GTX 1080 SeaHawk X EK @ 2.15GHz/5.5GHz
Storage Samsung 970 EVO+ (2x500GB) + Toshiba X300 (4TB)
Display(s) LG 29UM65-P (2560x1080 @ 75 Hz)
Case Thermaltake Core V51
Audio Device(s) Razer Kraken 7.1 & Scarlett 2i4 w/M-AUDIO BX5-D2
Power Supply Corsair RM750 (ver. 2019)
Mouse Logitech G700s
Keyboard Razer Blackwidow Chroma V2
Software MacOS 10.13.6 "High Sierra" & Windows 10 Pro x64
I wanted to mean the highest pressured flow point, which it's just the pump discharge to something, since i'm just w/c my cpu, the "bigger flow" it's suposed to be on pump->cpu to sure the good circulation through the block ... and i repeat, there's simply no room for a 120.3 rad, i have to "resign" with the stuff i have, ty all! :toast:
 
Last edited:

EastCoasthandle

New Member
Joined
Apr 21, 2005
Messages
6,885 (1.00/day)
System Name MY PC
Processor E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard Maximus Formula
Cooling D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory XMS 8500C5D @ 1066MHz
Video Card(s) HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage 2
Display(s) 24"
Case P180
Audio Device(s) X-fi Plantinum
Power Supply Silencer 750
Software XP Pro SP3 to Windows 7
Benchmark Scores This varies from one driver to another.
I wanted to mean the highest pressured flow point, which it's just the pump discharge to something, since i'm just w/c my cpu, the "bigger flow" it's suposed to be on pump->cpu to sure the good circulation through the block ... and i repeat, there's simply no room for a 120.3 rad, i have to "resign" with the stuff i have, ty all! :toast:

OK, I see thanks for the additional information and good luck with your project, the decision is ultimately yours :toast:
 
Joined
Feb 7, 2008
Messages
682 (0.12/day)
Location
Barcelona, Catalonia, Spain
System Name The Phoenix (rev. 3.0)
Processor Intel Core i9 9900K @ 4.9GHz (1.18V)
Motherboard ASUS TUF Z390 PRO-GAMING
Cooling Custom Full Loop w/EKWB & Swiftech components
Memory 32GB Corsair Vengeance RGB Pro 3200MHz (C15)
Video Card(s) MSI GTX 1080 SeaHawk X EK @ 2.15GHz/5.5GHz
Storage Samsung 970 EVO+ (2x500GB) + Toshiba X300 (4TB)
Display(s) LG 29UM65-P (2560x1080 @ 75 Hz)
Case Thermaltake Core V51
Audio Device(s) Razer Kraken 7.1 & Scarlett 2i4 w/M-AUDIO BX5-D2
Power Supply Corsair RM750 (ver. 2019)
Mouse Logitech G700s
Keyboard Razer Blackwidow Chroma V2
Software MacOS 10.13.6 "High Sierra" & Windows 10 Pro x64
OK, I see thanks for the additional information and good luck with your project, the decision is ultimately yours :toast:

NP dude, i know i should mount the rad vertical to achieve better temps and also that i'd need a better pump to sure good flow around the loop, but actually can't be done, no more budget at the moment.

Fitseries3 told me also in first instance to use just the MCR-220 rad cause the GTS120 hadn't enough room to blow all the hot air outta the case, after the modding now it has ... so it should work at maybe 50%-75% of efficiency as a exchanger ... the only thing i'm affraid (but also i think it's almost impossible) it's to get worse temps with MCR-220 + GTS120 back-to-back than just with MCR-220 alone just for a flow question cause the GTS120 it's not that big to bleed ... even it's a 1º-2ºC win with both, i think it's the best chance i can take right now since i'm just watercooling my cpu.

And if i'm wrong please tell me why ... i mean, i want to understand this as a thermodynamics thing, benefits or drawbacks of using the two rads back to back, how it's the flow stopped or how it affects to the total results of the CPU cooling.

I'll be very appreciated, ty :toast:
 
Joined
Feb 7, 2008
Messages
682 (0.12/day)
Location
Barcelona, Catalonia, Spain
System Name The Phoenix (rev. 3.0)
Processor Intel Core i9 9900K @ 4.9GHz (1.18V)
Motherboard ASUS TUF Z390 PRO-GAMING
Cooling Custom Full Loop w/EKWB & Swiftech components
Memory 32GB Corsair Vengeance RGB Pro 3200MHz (C15)
Video Card(s) MSI GTX 1080 SeaHawk X EK @ 2.15GHz/5.5GHz
Storage Samsung 970 EVO+ (2x500GB) + Toshiba X300 (4TB)
Display(s) LG 29UM65-P (2560x1080 @ 75 Hz)
Case Thermaltake Core V51
Audio Device(s) Razer Kraken 7.1 & Scarlett 2i4 w/M-AUDIO BX5-D2
Power Supply Corsair RM750 (ver. 2019)
Mouse Logitech G700s
Keyboard Razer Blackwidow Chroma V2
Software MacOS 10.13.6 "High Sierra" & Windows 10 Pro x64
BUMP, any more ideas? i'm gonna mount the loop tomorrow and i'll be happy with a lil more of advice =)
 

EastCoasthandle

New Member
Joined
Apr 21, 2005
Messages
6,885 (1.00/day)
System Name MY PC
Processor E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard Maximus Formula
Cooling D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory XMS 8500C5D @ 1066MHz
Video Card(s) HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage 2
Display(s) 24"
Case P180
Audio Device(s) X-fi Plantinum
Power Supply Silencer 750
Software XP Pro SP3 to Windows 7
Benchmark Scores This varies from one driver to another.
Sorry about that, I didn't get your posts/PM until today.
 
Joined
Feb 7, 2008
Messages
682 (0.12/day)
Location
Barcelona, Catalonia, Spain
System Name The Phoenix (rev. 3.0)
Processor Intel Core i9 9900K @ 4.9GHz (1.18V)
Motherboard ASUS TUF Z390 PRO-GAMING
Cooling Custom Full Loop w/EKWB & Swiftech components
Memory 32GB Corsair Vengeance RGB Pro 3200MHz (C15)
Video Card(s) MSI GTX 1080 SeaHawk X EK @ 2.15GHz/5.5GHz
Storage Samsung 970 EVO+ (2x500GB) + Toshiba X300 (4TB)
Display(s) LG 29UM65-P (2560x1080 @ 75 Hz)
Case Thermaltake Core V51
Audio Device(s) Razer Kraken 7.1 & Scarlett 2i4 w/M-AUDIO BX5-D2
Power Supply Corsair RM750 (ver. 2019)
Mouse Logitech G700s
Keyboard Razer Blackwidow Chroma V2
Software MacOS 10.13.6 "High Sierra" & Windows 10 Pro x64
Well, past friday at least i installed all the stuff, finally the loop it's designed as my first idea: res->pump->block->MCR-220->GTS-120->res

In all the webs i read, switching from a simple 120 radiator to a "normal" dual one (not GTX240 or TC PA 120.2) you should notice a 4-5ºC win in full tasks, but that's all ... in my case connecting the radiators back to back ... with a increase of 5ºC on ambient temp (past week we were at 19ºC, now my room it's at 24ºC) ... i still win 7-9ºC at full tasks (sometimes 10) in comparison to my previous setup (i did temp tests along the week, not just one ;)) so ... in my case, connecting radiators back to back has worked flawlessly, not a gain of just 1ºC as EastCoasthandle experience, i'm winning 3-5ºC constantly ... so i'm really happy finally

Hope this helps to anyone too :) :toast:

ps: the idle temps are almost the same (maybe 1ºC better) than previous setup ... but since my ambient temp has upraised 5ºC in the last week i think it's pretty normal ... i'll gotta wait till next fall-winter to see my low 20's in idle =)
 
Last edited:

EastCoasthandle

New Member
Joined
Apr 21, 2005
Messages
6,885 (1.00/day)
System Name MY PC
Processor E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard Maximus Formula
Cooling D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory XMS 8500C5D @ 1066MHz
Video Card(s) HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage 2
Display(s) 24"
Case P180
Audio Device(s) X-fi Plantinum
Power Supply Silencer 750
Software XP Pro SP3 to Windows 7
Benchmark Scores This varies from one driver to another.
Please post your before and after idle and load screen shot temps. Also provide your ambient temps during the observation. Your post is a bit vague.
 
Joined
Feb 7, 2008
Messages
682 (0.12/day)
Location
Barcelona, Catalonia, Spain
System Name The Phoenix (rev. 3.0)
Processor Intel Core i9 9900K @ 4.9GHz (1.18V)
Motherboard ASUS TUF Z390 PRO-GAMING
Cooling Custom Full Loop w/EKWB & Swiftech components
Memory 32GB Corsair Vengeance RGB Pro 3200MHz (C15)
Video Card(s) MSI GTX 1080 SeaHawk X EK @ 2.15GHz/5.5GHz
Storage Samsung 970 EVO+ (2x500GB) + Toshiba X300 (4TB)
Display(s) LG 29UM65-P (2560x1080 @ 75 Hz)
Case Thermaltake Core V51
Audio Device(s) Razer Kraken 7.1 & Scarlett 2i4 w/M-AUDIO BX5-D2
Power Supply Corsair RM750 (ver. 2019)
Mouse Logitech G700s
Keyboard Razer Blackwidow Chroma V2
Software MacOS 10.13.6 "High Sierra" & Windows 10 Pro x64
Unfortunately i don't have screenshots of the temps on the new setup but i'll tell you my results:

GTS120: 3,54Ghz @ 1.52V -> 10 hours Overdrive stability test -> ambient temp: 19-20ºC -> MB Temp: 25ºC -> max temps on core's 56/46ºC

MCR-220 + GTS120: 3,54Ghz @ 1.52V -> 8 hours and a half Overdrive stability test -> ambient temp: 21-22ºC -> MB Temp: 27ºC -> max temps on core's 46/37ºC

MCR-220 + GTS120: 3,54Ghz @ 1.52V -> 8 hours and a half Overdrive stability test -> ambient temp: 24-25ºC -> MB Temp: 30-31ºC -> max temps on core's 48/39ºC
 
Last edited:

EastCoasthandle

New Member
Joined
Apr 21, 2005
Messages
6,885 (1.00/day)
System Name MY PC
Processor E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard Maximus Formula
Cooling D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory XMS 8500C5D @ 1066MHz
Video Card(s) HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage 2
Display(s) 24"
Case P180
Audio Device(s) X-fi Plantinum
Power Supply Silencer 750
Software XP Pro SP3 to Windows 7
Benchmark Scores This varies from one driver to another.
Unfortunately i don't have screenshots of the temps on the new setup but i'll tell you my results:

GTS120: 3,54Ghz @ 1.52V -> 10 hours Overdrive stability test -> ambient temp: 19-20ºC -> MB Temp: 25ºC -> max temps on core's 56/46ºC

MCR-220 + GTS120: 3,54Ghz @ 1.52V -> 8 hours and a half Overdrive stability test -> ambient temp: 23-24ºC -> MB Temp: 29-30ºC -> max temps on core's 47/39ºC

What a shame, it would have been nice to have. From the look of things, you went from a single fan rad to a dual fan + single fan rads. My test was from a 3 fan rad to a 3 fan + single fan rad setup. Thanks for sharing...:toast:
 

DaMulta

My stars went supernova
Joined
Aug 3, 2006
Messages
16,168 (2.51/day)
Location
Oklahoma T-Town
System Name Work in progress
Processor AMD 955---4Ghz
Motherboard MSi GD70
Cooling OcZ Phase/water
Memory Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s) CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage SSD 64GB
Display(s) Envision 24'' 1920x1200
Case Using the desk ATM
Audio Device(s) Sucky onboard for now :(
Power Supply 1000W TruePower Quattro
East my buddy is getting the DD water box,D5 pump
TDX CPU block, 2xMAZE5GPU(I tell him he needs 3 because he has three cards but he took the 3ed one out)Dual 5 1/4" Bay Reservoir and 2 GTX240 rads..


I told him that he might need another pump, but how should he start his run. I'm thinking res, pump, CPU, rad, video cards, rad, and back to res. I think he might need to add another pump before the video cards for one loop.
 
Last edited:
Joined
Feb 7, 2008
Messages
682 (0.12/day)
Location
Barcelona, Catalonia, Spain
System Name The Phoenix (rev. 3.0)
Processor Intel Core i9 9900K @ 4.9GHz (1.18V)
Motherboard ASUS TUF Z390 PRO-GAMING
Cooling Custom Full Loop w/EKWB & Swiftech components
Memory 32GB Corsair Vengeance RGB Pro 3200MHz (C15)
Video Card(s) MSI GTX 1080 SeaHawk X EK @ 2.15GHz/5.5GHz
Storage Samsung 970 EVO+ (2x500GB) + Toshiba X300 (4TB)
Display(s) LG 29UM65-P (2560x1080 @ 75 Hz)
Case Thermaltake Core V51
Audio Device(s) Razer Kraken 7.1 & Scarlett 2i4 w/M-AUDIO BX5-D2
Power Supply Corsair RM750 (ver. 2019)
Mouse Logitech G700s
Keyboard Razer Blackwidow Chroma V2
Software MacOS 10.13.6 "High Sierra" & Windows 10 Pro x64
What a shame, it would have been nice to have. From the look of things, you went from a single fan rad to a dual fan + single fan rads. My test was from a 3 fan rad to a 3 fan + single fan rad setup. Thanks for sharing...:toast:

Now i understand your lil win better, yes, my past setup was just the GTS120 ... now it's MCR-220 + GTS120, and as i see the things and reviews, it's running nearly as good as a "normal" triple 120 radiator (not GTX or PA 120.3) ... anyway, within a months i'll improve my pump too since the flow and pressure are clearly being affected.

And talking of pumps, clearly the D5 is your favourite choice, but i think it adds too much heat to the fluid with its 24W (in my setup the block it's the first element right after the pump) ... and watching the custom LC tank CyberDruid was building i saw the AlphaCool AP1510 which delivers till 6m of head pressure (19 feet) and 1500LPH (~396GPH) with a tiny power consumption of 17W ... so ... which one to choose? i'm looking for 1200LPH or more with a considerable head pressure and not too much heat added ... help me to decide ;)

:toast:
 

EastCoasthandle

New Member
Joined
Apr 21, 2005
Messages
6,885 (1.00/day)
System Name MY PC
Processor E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard Maximus Formula
Cooling D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory XMS 8500C5D @ 1066MHz
Video Card(s) HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage 2
Display(s) 24"
Case P180
Audio Device(s) X-fi Plantinum
Power Supply Silencer 750
Software XP Pro SP3 to Windows 7
Benchmark Scores This varies from one driver to another.
East my buddy is getting the DD water box,D5 pump
TDX CPU block, 2xMAZE5GPU(I tell him he needs 3 because he has three cards but he took the 3ed one out)Dual 5 1/4" Bay Reservoir and 2 GTX240 rads..


I told him that he might need another pump, but how should he start his run. I'm thinking res, pump, CPU, rad, video cards, rad, and back to res. I think he might need to add another pump before the video cards for one loop.

I would go with a 2nd pump to be honest. From what you posted that orientation sound good if he's only using one pump.




Now i understand your lil win better, yes, my past setup was just the GTS120 ... now it's MCR-220 + GTS120, and as i see the things and reviews, it's running nearly as good as a "normal" triple 120 radiator (not GTX or PA 120.3) ... anyway, within a months i'll improve my pump too since the flow and pressure are clearly being affected.

And talking of pumps, clearly the D5 is your favourite choice, but i think it adds too much heat to the fluid with its 24W (in my setup the block it's the first element right after the pump) ... and watching the custom LC tank CyberDruid was building i saw the AlphaCool AP1510 which delivers till 6m of head pressure (19 feet) and 1500LPH (~396GPH) with a tiny power consumption of 17W ... so ... which one to choose? i'm looking for 1200LPH or more with a considerable head pressure and not too much heat added ... help me to decide ;)

:toast:

Your post is a little hard to read/understand so for the first part I cannot address. As for your pump comment, all water pumps add heat at varying degrees. As far as the AP1510 goes I read that it requires a lot more then 17 voltage to get 6m head and it's noisy. However, I have not found any reviews of this pump yet.
 
Last edited:
Joined
Feb 7, 2008
Messages
682 (0.12/day)
Location
Barcelona, Catalonia, Spain
System Name The Phoenix (rev. 3.0)
Processor Intel Core i9 9900K @ 4.9GHz (1.18V)
Motherboard ASUS TUF Z390 PRO-GAMING
Cooling Custom Full Loop w/EKWB & Swiftech components
Memory 32GB Corsair Vengeance RGB Pro 3200MHz (C15)
Video Card(s) MSI GTX 1080 SeaHawk X EK @ 2.15GHz/5.5GHz
Storage Samsung 970 EVO+ (2x500GB) + Toshiba X300 (4TB)
Display(s) LG 29UM65-P (2560x1080 @ 75 Hz)
Case Thermaltake Core V51
Audio Device(s) Razer Kraken 7.1 & Scarlett 2i4 w/M-AUDIO BX5-D2
Power Supply Corsair RM750 (ver. 2019)
Mouse Logitech G700s
Keyboard Razer Blackwidow Chroma V2
Software MacOS 10.13.6 "High Sierra" & Windows 10 Pro x64
I was trying to say that now i understand better your little win of 1ºC connecting rads back to back ... i just changed the order on the "better" (spanish legacy) ... and as i always say, english it's not my primary language, not even my secondary, it's the third one and i don't have any official title, i just learned it at school and then music, series and more things ... so excuse my typos ;)

I suppose those 17W are produced under 12V, as the 24W of D5, sure are measured under 12V too ... and yes, i saw about the noise level but i didn't see the levels of D5 anywhere, do you have the dbA specs?

ps: my temp's post was wrong so i'm gonna edit it, i just noticed, the ambient temp of 24-25ºC as well as the 30ºC-31ºC on the MB was today ... i just confused data, gonna fix it.
 

EastCoasthandle

New Member
Joined
Apr 21, 2005
Messages
6,885 (1.00/day)
System Name MY PC
Processor E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard Maximus Formula
Cooling D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory XMS 8500C5D @ 1066MHz
Video Card(s) HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage 2
Display(s) 24"
Case P180
Audio Device(s) X-fi Plantinum
Power Supply Silencer 750
Software XP Pro SP3 to Windows 7
Benchmark Scores This varies from one driver to another.
Do you use core temps or Real Temps to monitor your temps? I Know core temps should work but I am not sure about Real temps.
 
Joined
Feb 7, 2008
Messages
682 (0.12/day)
Location
Barcelona, Catalonia, Spain
System Name The Phoenix (rev. 3.0)
Processor Intel Core i9 9900K @ 4.9GHz (1.18V)
Motherboard ASUS TUF Z390 PRO-GAMING
Cooling Custom Full Loop w/EKWB & Swiftech components
Memory 32GB Corsair Vengeance RGB Pro 3200MHz (C15)
Video Card(s) MSI GTX 1080 SeaHawk X EK @ 2.15GHz/5.5GHz
Storage Samsung 970 EVO+ (2x500GB) + Toshiba X300 (4TB)
Display(s) LG 29UM65-P (2560x1080 @ 75 Hz)
Case Thermaltake Core V51
Audio Device(s) Razer Kraken 7.1 & Scarlett 2i4 w/M-AUDIO BX5-D2
Power Supply Corsair RM750 (ver. 2019)
Mouse Logitech G700s
Keyboard Razer Blackwidow Chroma V2
Software MacOS 10.13.6 "High Sierra" & Windows 10 Pro x64
RealTemp works better in new Intel's, specially Wolfdales and Yorkfields as far as i read (on XS and also in TPU) ... i always used Core Temp and since this february i'm also using CPUID Hardware Monitor which reports the same temps on cores as Core Temp does :)
 
Joined
Nov 16, 2006
Messages
2,724 (0.43/day)
Location
Blighty
Processor R7 5800x3D
Motherboard MSI x570 Tomahawk
Cooling XSPC Raystorm Edge,EK QS P420M,EK D5pwm Revo Res
Memory 32gb Corsair Vengeance RT 3600 cl16
Video Card(s) Zotac 3070ti Amp Extreme
Storage Samsung 980pro 1tb x2
Display(s) MSI MPG321QRF QD
Case Corsair 7000D
Power Supply EVGA 1000 P2
Mouse G900
Keyboard Corsair k60 RGB PRO
Software Win 11
The new fuzion is available at some uk retailers now, has anybody seen any tests yet?
 

Attachments

  • FuZion-v2_layout.jpg
    FuZion-v2_layout.jpg
    54.2 KB · Views: 366
  • FZ2_Q-insert.jpg
    FZ2_Q-insert.jpg
    53.8 KB · Views: 363
  • FuZion_v2-HR.jpg
    FuZion_v2-HR.jpg
    100.6 KB · Views: 368
Top