Get Your Modded P5Q Pro BIOS Here!

[Ketxxx]

No it wont. As I said 1150 is a weird number. I'm sure you could run 1200 though with a small voltage increase.

 

[Deleted member 24505]

To get to 1150,you may have to raise/lower your fsb so 1150 will be one of the options.What voltage did you try your ram at for 1150? try a tad higher maybe.

 

[ShadowFold]

Hey ket anyway you can tell me how to make a new post screen?

 

[Ketxxx]

Easy way is to use the Asus MyLogo software.

 

[CrAzY_CbR]

He has left the Official Bios P5Q 1004, could be improved?

It is more stable than the 703 but would be better with the table memories of the deluxe or premium, which most advanced east.

 

[Ketxxx]

Erm.. not quite sure all of what your trying to ask so I'll answer what the translator you used did get right mBIOS 1004 is more stable and enhaces overclocking greatly. Being based on a much newer BIOS that 703 it also fixes a lot of other issues too.

 

[CrAzY_CbR]

I say that if you can make a mod bios from the 1004 official improved as did the 901 beta P5Q NON-PRO

Sorry for my English, I am Spanish and I use google translate

 

[Ketxxx]

I will be looking at 1004 official for the P5Q Pro, I don't think Asus have made many (if any) changes from the beta though.

 

[Ketxxx]

New mBIOS on its way folks! This one is based on beta 1104! Looks like Asus are finally taking their thumb out their arses and fixing the P5Q series up good.

In the meantime here is the vanilla 1104 beta. Let me know your experiences so I know what does and doesnt need improving.

 

[CrAzY_CbR]

can make an mBIOS of the P5Q Non-Pro 1004 final with the memory table, CPU microcode and all the improvements that can injected from P5Q Deluxe 1103??


P5Q Deluxe 1103

P5Q 1004

thanks and I'm sorry for my English!

 

[Ketxxx]

I will make a mBIOS for all the P5Q boards apart from the Premium eventually. Unless a serious problem is reported all mBIOS versions will be based on the latest available beta BIOS. In the possible event a serious problem is reported with an mBIOS the latest available official final release BIOS will be used as the building block for my mBIOS.

 

[hema]

I will make a mBIOS for all the P5Q boards apart from the Premium eventually. Unless a serious problem is reported all mBIOS versions will be based on the latest available beta BIOS. In the possible event a serious problem is reported with an mBIOS the latest available official final release BIOS will be used as the building block for my mBIOS.

I flashed to 1004(P5Q NO PRO) with one problem
my q6600 cpu temp. show in bios and with real temp in windows lower than the last bios version 703 with 10 degree
this wrong reading in temp with this bios version and Q6600 processor why?
so I reflashing back to 703
Iam watting for your mBIOS versions to fix this problem
I will tray mBIOS version 0901 and I hope it can help me in this prb.

 

[Ketxxx]

I flashed to 1004(P5Q NO PRO) with one problem
my q6600 cpu temp. show in bios and with real temp in windows lower than the last bios version 703 with 10 degree
this wrong reading in temp with this bios version and Q6600 processor why?
so I reflashing back to 703
Iam watting for your mBIOS versions to fix this problem
I will tray mBIOS version 0901 and I hope it can help me in this prb.

Read the readme file included with mBIOS 1004. I will not say this again! The file is included FOR GOOD REASON. I will not respond to any such posts as this again as its all covered in the readme. Just so nobody has any excuses;

This mod BIOS is based on 1004 beta, currently the
latest available BIOS for the P5Q Pro (19\7\08)


---My additional changes
1. Add custom P6 CPU table, 39 varients of CPUs supported instead of 31 - more than any P45 or ROG series!
2. Add P5Q Premium memory table to drastically enhance DRAM compatibility and overclocking.
3. Change default boot logo

---Asus changes for default 1004 beta
1. Amend specific CPU temperature detection methods
2. Enhance memory performance
3. Enhance memory compatibility
4. CPU control of the new micro-code

---IMPORTANT NOTES!!!!

After upgrading to this BIOS your system may not POST on restart, DO NOT PANIC! It appears as though Asus update
also updates the bootblock with this BIOS. Simply power down your system if it does not POST on restart and
remove power cord from the back of the PSU, switch the CMOS jumper to the "clear" position and remove the battery.
Presss power button a few times and hold for a few seconds each time,(to discharge the capacitors to ensure a successful CMOS clear)
leave for a minute or two then move CMOS jumper to its normal position, replace battery and power the system on.

 

[Ketxxx]

Alright for anyone wondering I have just flashed to vanilla 1104 beta for the P5Q Pro myself for testing, Asus have certainly made some big internal changes it seems, the board now boots @ PC8000 speeds off the bat. As most will know, the P5Q series below the Premium had issues doing this. So anyone having memory problems I advise you give this BIOS a shot. I will of course be doing an mBIOS 1104 in due time.

 

[hema]

Read the readme file included with mBIOS 1004. I will not say this again! The file is included FOR GOOD REASON. I will not respond to any such posts as this again as its all covered in the readme. Just so nobody has any excuses;

ok ok ok ok
why are you so angry :shadedshu like that
we all frinds in this forum
and i wish you good luck with your work in latest version of P5Q boards

 

[ShadowFold]

ok ok ok ok
why are you so angry :shadedshu like that
we all frinds in this forum
and i wish you good luck with your work in latest version of P5Q boards

Well it is in the readme and you didnt read it

 

[Ketxxx]

Exactly Sorry folks but its a huge waste of my time answering things that are covered in the readme.

 

[cp#]

I'm going to try out the 1104 also, I'll be back with impressions

 

[ShadowFold]

I'm more than happy with 1004 idk if I want to move to the new one or not

 

[cp#]

On first boot up after applying some of my OC settings, I got a BSOD after the Vista loading screen (did not make it to login screen obviously). The PC reset and I disabled a few things in the BIOS and booted fine. I really need to figure out what is causing this because it is Prime stable at 9x400 and 1.25V (in BIOS)

 

[Ketxxx]

I'm more than happy with 1004 idk if I want to move to the new one or not

I would give 1104 a shot. I havent looked at anything in detail but for me 1004 = no POST @ PC8000+ speeds, 1104 = booted fine @ PC8000+ speeds. In a nutshell I would say 1104 is much more refined, and tbh 1104 should be the shipping BIOS for the board. In comparison to previous vanilla BIOS versions for the P5Q Pro 1104 pisses all over the others.

 

[alexp999]

hey ket, can you read the CPU tables in the Bios's?

I was wondering what the mobo uses for its NB and SB etc voltages for a 1600FSB CPU. So I know what to set when I OC.

Cheers.

 

[Ketxxx]

NB and SB you shouldnt need more than 1.3v or so, assuming your aiming for high FSB. New mBIOS versions will be available soon for ALL P5Q series boards.

 

[alexp999]

NB and SB you shouldnt need more than 1.3v or so, assuming your aiming for high FSB. New mBIOS versions will be available soon for ALL P5Q series boards.

I just want to get to 400FSB for now. It says default voltage for NB is 1.1v, but I'm assuming that only for a 266FSB

Are you going to be modding the 1103 deluxe bios?

 

[Ketxxx]

I said all didnt I?