Recent content by celemine1Gig

I'm not sure if the fan, mounted like that, is a good idea. I mean most likely you need such a low profile heatsink in builds where there is something directly above the socket limiting the space for the heatsink. That something often is the power supply. And PSUs tends to have their fan mounted...

Nobody?

Hi guys, I'm looking for someone who owns a MSI HD4850 1GB DDR3 RAM (V151). The V151 part is the most important. There are lots of V153 HD4850 1GB out there, it seems, but only a few V151, I guess. Anyways, if you have that exact card, please let me know. I would need a copy of the cards...

Could you please correct the marked part. It's "Fraunhofer Institute", or "Fraunhofer IFAM". "Fraunhofer Forscher" just means Fraunhofer researchers. ;) Officially it's "Fraunhofer Institute for Manufacturing Technology and Applied Materials Research". BTW, here is a link...

DISCLAIMER: ALL MODS ARE DONE AT YOUR OWN RISK! YOU'LL DEFINATELY VOID YOUR WARRANTY WHEN PERFORMING THE MODS DESCRIBED HERE. Here's the pic describing the VDroop-, QRSEL- and GTLREF[3:0]-mods: http://www.fh-augsburg.de/~madocer/AW9D-Mods.jpg

Great! Clear pics and clear descriptions, as always. ;) Big thumbs up from me. Just started modding my AW9D Non-Max. Perhaps I'll see if I can find the GTLRef Mods for this board. Would sure be great for QuadCores. Already increased the max. possible termination current for vdimm/vtt by adding...

Sorry for the late reply. Was very busy the last weeks. On topic: Of course this would work. You mod the CPU and not the board. And the VCore range is the one specified by AMD, so all motherboards should support it.

Ooops, I'm sorry. posted on german forums at the same time NT=Netzteil=Power Supply=PSU :) 3.3V directly from the PSU.

BTW, Superstarr, you just told me that you were confused that you couldn't find pull-up voltage points on your boards. Pull up means that you just need a higher voltage than the reference point, to make the signal appear as a digital 1, i.e. high. Or lower than the reference for a digital 0...

All you need to do to find the vid pin-connections, is to use a digital mutlimeter and set it to continuity test mode (test for a resistance close to zero, i.e. direct connections). Then you let one probe touch the known vid pin on the isl6566 controller and probe around for points directly...

[page=Introduction, Parts & Overview] Introduction The ECS/Elitegroup NFORCE4-A939 is the cheapest nForce4 based motherboard available here in Europe. Although in contrast to the price, the overclocking options and the overall build quality of this board are both really good and far away...

The question now is: Who is willing to make Nvidia and ATi angry by modifying the drivers? And who is even able to do it? I honestly don't think that this will happen any time soon.

Well, the problem is that every brand integrated a system check into its driver sets. That way, Nvidia SLI will only work on Nvidia Boards and ATi Crossfire will only work on ATi boards, unless someone cracks the driver packages and removes or someway fools the systemcheck. ;) Older Nvidia...

Well, I played COD2, NFSMW and some other games yesterday and belive me, the extra pipelines are working and absolutely error-free! Even the ATITOOL 3D-View shows increased FPS, the number of active piplines is shown as 12 (see my screeny above) and the chip temp increased slightly due to the...

ATI/Dell X800SE PCI-E Just some info for those with 128MB (Hynix 2.8ns) PCI-E Radeon X800SE Cards. Most of these cards were sold in Dell systems as far as I know. Perhaps the info could also be interesting for those people who recently bought X800GT cards, but I don't know for sure. My card...