Recent content by Coolsys

I can see something when i quit a game, but i think it is the same like every other graphic-card except HD4870. You are welcome to try it yourself ;).

It doesn't do this in my case ;) And i don't see any flicker - everythings fine, like it should. Just for "perfection" i would like to have the original informations instead of sapphires in my bios. But as you say it couldn't be made with RBE i disclaim perfection :o.

But it is the same Bios. If the checksum wouldn't be different i could save the working Bios only with changed informations and it would'nt only with the difference in the informations. Like a BMW that can't drive if i write Chrysler on it.

Why should it be a problem with a "too far" modded bios?? :wtf: The Bios should work anyway, because the card doesn't care about its name..

I had flashed both Bios on my card and both are based on the same latest sapphire bios. The only thing i want to know is why the bios with edited informations doesn't work, while the other does.

It's no Problem to flash the Bios. But i want to know why one is working and the other one not. I don't think that a different P/N could be a Problem.

I've got a Problem. I have 2 modified Bios basing on the same Bios. Only differences are on Page1 with informations about the card. But why do changed informations prevent the bios from working on the card? here is a link to both bios-files...

Setting lower voltage for 2D / LP 3D is useless because the card decides automatically which voltage has to be set depending on clock. Someone measured 1,263V on 900MHz and 1,0xx on 400MHz. I could do so too, but i want to keep away any DMM from my card until i really need it. Changing the...

But now it works(2D-Clocks, but with a bit flickering. Testing what's the cause). But the Problem with the fan is still present. Although i haven't changed somethin within the fan fan-tab the fan goes with lower temperatures higher than before.

Hi BAGZZlash! Yesterday i tried to save lower CLocks for 2D in my BIOS. (I've used RBE 1.11, but i think you didn't make a change in this case-->) I saved 270/250 in Clock Info 1 and 2, saved the BIOS and flashed with DOS-USB-Stick. After resetting my Computer the fanspeed wasn't the same like...