Recent content by georges

thanks for the help thanks for the help, i called e-power and when i gave em the specs for my system, he actually recommended a 650-700w power supply. And the turbo fan switch is supposed to increase th voltage to the 2 fan wires that connect to the case fans. the fact that the switch was not...

i think something is up what's up guys.... the saga continues... while multitasking, my vcore A which i presume is the CPU which is supposed to be at 1.4 is hopping between 1.45 and 1.51, on top of that the 12v is going from 11.97 to 11.79, is this s a prob??

hey.. 11.92 on the 12v line

the wattage that continously flows from that PSU... i thought that's what they meant by efficiency when they listed them in PSU specs.... but i couldn't find the efficiency specs for this model... and i don't know the telltale signs of too little wattage going through the system. I just can't...

wow u guys rock.... any of u this good with taxes?? ok.. the Apevia did not come with the psu, its a epower zu 550w the -8.5 is -.85 i think... vcore 2 you are right, my mem was boosted to to 2.1v from 1.8v in bios because they are crucials. i used bios for some readings, but that can't be...

11.97 on 12v but -5v is showing -8.5 and the turbo fan button only gives extra voltage to the fan for a few secs, once windows starts loading the fan voltage decreases back and Vcore 1 volt is 1.45 Vcore 2 volt is 2.11??? even though normal and BIOS set the cpu core at 1.4v

can't find efficiency specs for epower zu 550 You guys know if this is enough power for my system <-------------- sys specs Can't find the efficiency on my psu, and what are the signs of not enough power? thankz

anyone know of a WINFLASH or RABIT problem with 1950xt or pro, i program the bios through rabit for higher fan settings in all modes default, #1, and #2, winflash em into the card, then rabit edit again to check em out and make sure they are there. but the fan stays at factory settings according...

ati tools works, but it's having a catfight with Punkbuster, so if they are both running, the computer crashes. I turn on my pc for 120 min a day and 119:30 min of those are in bf2..... sooo anyway this gecube has 3d clocks of 628/700 for some reason. i ll upload bios to your website if you...

you want performance u need to RAID 0 or stripe. use Systool and you will be pissed that your single HDD rated at 3.0G =300mb per sec is bursting at 140 and sustaining 70-80 if you are lucky. partitioning is for organization not performance. RAID stripe em and you will see it go to 240 with...

thanks for the help bro but i dont see voltage in ati tool .26 or .27b2. and .26 has absolutely no fan control for this car. don't know whats up. its 627 core and 702 mem in 3d mode using catalyst. thought that was kind of low for a 1950xt with 512mb, and i dont see another bios in bios section...

hmm.. i dont see voltages in .27 or .26. and .26 doesnt have fan control for x1950xt?? i know it did on my x850xt wtf? also i have 3 profiles in rabit editor default 499core 600 mem 1.15 v tmax 140????????? u gotta be shitting me profile1 same as above with tmax of 120 lol...

ok i'ma do this tonight.... but what are these values an where is voltage in atitool.27?????? 2.121V MVDDC 2.121V MVDDQ 1.498V VCDDI

ok thanks for the help, a couple of more questions, because the last time i flashed a bios was an x850pro----> x850xt using atiflash. are these the steps that i need to do? 1. dump the bios from atitool 2 rabit edit that bios version(can i increase voltage here, and what is a good voltage?)...

yes i have vista and xp installed both... is the pb isuue fixed for xp?? cause vista64 wont even run atitool. i always thought though, that if atitool closes it relinquishes control of video card to ccc, thats why i was going to flash stable higher clocks, fan speeds and voltage into the...