Recent content by giacomo160790

Hello everyone, I expose my problem With my motherboard gigabyte 990xa-UD3 can save different "profiles" of the bios and load at startup In particular, I saved 3 profiles 1) All in stock 2) Soft OC with only increse the moltiplier 3) Extreme OC with overvolt Now at every boot I can select...

Guys, I wanted to ask you, increase the frequency of nb and increasing the voltage of the cpu / nb helps stability for overclocking the cpu?

PCI I gave up, instability generated at random ... Once I completed a one hour test with no problems, the next time after 5 minutes gave error ... For screen here it is https://www.dropbox.com/s/ikh9w6rwlz7glkp/4%2C62.jpg

Updating ... I managed with the pcie at 110 to increase and be stable after 1 hour at 4.64 GHz .. I've done several tests, 4.66 prime95 gave error after about 7-8 minutes However, there is an improvement in performance, with 3Dmark I got my best result ... 6296 taking into FireStrike 4.64 GHz...

Recommended to keep on mediuom LLC, with voltage between 1,456 and 1,477 at idle, normal use 1,488 and 1,504 with prime95 Or is it better high, voltage 1,477 and 1,488 normal use, with prime95 1,504 and only after 10-11 minutes of the first shooting at 1,520 ... Which of these two? Another...

I have seen the best results of my ... Maybe the motherboard? Maybe moving to a 990FX might have a better result?

Hello, I checked the APM was disabled I set on medium LLC, the voltage at idle is between 1,456 and 1,477, with a normal usage rises to 1,488 and 1,504 in prime95 stable after 1 hour I lowered the Vcore of -0.025 ever LLC mediums, but at idle is at 1,440 to 1,470 with prime95, by mistake...

Another question, for the vroop, under load the voltage should fall? Because it increases the current, right? I had tried all the values with LLC but vdroop always on top, rise voltage in full

Can I try Friday, because now I'm out for the university ... Friday I try and let you know the results Meanwhile, thank you very much

On medium, I had already tried I wrote it on a sheet... At idle 1,456, in full 1,504

Hello everyone , I wanted to ask for suggestions for overclocking my fx- 6100, my setup is below the avatar So far I have - Disabled C1E - Deactivated cool & quiet - Disabled Turbo Core - PCIe frequency 101 - HT Link multiplier from 13x to 12x - High LLC ( also tried ultra high always acts...

Solved, i write there http://www.techpowerup.com/forums/threads/sapphire-7790-dual-x-exceed-limit-gpu-ram.193839/ Voltage is unlockable!!!!!:peace::rockout::rockout: Screen https://www.dropbox.com/s/u750c7qajtv0rlg/7790overvoltage.jpg

VOLTAGE UNLOCK!!! :rockout::rockout::rockout: With combined use of Trixx 4.6.3 beta and msi afetrburner 3.0.0 beta 17 is possible to increse the voltage Now i have test 1240/6900@1,205v and 1260/6900@1,220v With 3dmark i hame a better graphics score, bat a bad conbined test.... Link of my...

solved!!! solved!!! Solved!!! So, with the new Catalyst 13.11 beta 9.5 And using msi afterburner beta 17 There's the Possibility to set much higher values, I was able to find stable values in 1220/6900 with a significant increase in performance (thanks to those memories on +500 hz) I also...

I found some reviews that used to overclock beyond trixx 4.6.1 beta but is not found anywhere Writing to a review site, they gave me the beta version 4.6.3, which also recognizes the catalyst 13:11 beta9.2, this version allows you to raise the frequencies beyond our limit ... But I tried it...