• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Recent content by Goldlocke

  1. G

    Radeon X800 Voltmods

    620/630 so far. my card is no good overclocker. :( VGPU ... 1.83V VDDR ... 2.20V VDDQ ... 2.24V
  2. G

    Radeon X800 Voltmods

    I upped the 5V rail of my PSU to 5.5V. guess what? Now the VGPU stays where it should be under load! :) (upping the 12V rail didn't help).
  3. G

    Radeon X800 Voltmods

    As to the PSU. I use OCZ Powerstream 520 with the dedicated coated Powerline to the vidcard. It could be the VR type - yes. At the moment I use a cheap one. I'll try a cermet type tomorrow. What VDDQ do you mean with "bios VDDQ". I did VGPU mod, OCP mod, VDDR and VDDQ mod yet.
  4. G

    Radeon X800 Voltmods

    Will the OCP mod remove the drop of VGPU under load? see my post above. If not, why is that drop? From 1,83V to 1,73V under load. thx! :)
  5. G

    Radeon X800 Voltmods

    VGPU drop under load Will the IGPU mod help with the decrease of VGPU under load? My VGPU set to 1,80V @ idle drops to ~ 1,69V under load. When VGPU is set to 1,70V it stays there under load! So I guess, OCP limits VGPU output under load, right? So solder a 250kOhm VR on each side of...
Top