Recent content by kns

ok increase the cpu voltage up two notches.. ie set to 1.275 and try

ok set mem voltage to 2.00 vcore overvoltage to 0 turn off cie, speedstep, cpu tm function But do keep check on temps

yes disable all the powersaving options for now. and what are the options under memory voltage and vcore overvoltage?

Currently your motherboard is evga 780i itself?? It doesnt bsod or something?? Only keeps loading?

ah ok:laugh: try running the system now..

I guess u meant to say 1.2625v 1.6250 will kill your processor

Keep pressing + till it says 1.2625v In the ram field itself ie 285*2.5 ~ 715

The stock intel paste is really good. I regret for removing my cooler once and then no thermal compound was able to perform as good as the intel one. The settings on my board are quite different and basic. but mainly set cpu voltage to manual. set ram to FSB*2.5 the default for this chip is...

Decrease your voltage. It will bring down the temps. You can easily reach 3.5ghz on the stock cooler with good thermal compound.. Am also running the same chip at 3.5ghz with stock cooler and my voltages: in bios setting 1.275v in bios reading 1.252v in windows idle 1.232v under load 1.216v FSB...

Your tv supports audio return channel through the hdmi port.. Connect this hdmi port to the receiver and the audio will be output through this. This works if your receiver supports audio return channel. Give it a try.

I once had the same problem and running chkdsk solved the problem and i was able to access the files. But my os was windows xp with ntfs partition. I guess it may work here also. Just run CHKDSK C: /R at command prompt. Replace C with the drive thats not working.

Had you used a pen drive on your system before shutting it down? Since k:\ may refer to a pen drive or whatever external drive that may have been infected by a virus. I have seen such shortcuts getting created when pcs are virus infected. Also sometimes the original files are hidden with system...

Oh thats really cool.. the card is really good on performance when compared to 9600gt and its also isnt so powerhungry..

Nope guys connecting the other molex didnt fix anything.. Guess the card is really damaged.. anyway will use it the way it is now.. @mdsx1950: i noticed that u are running a hd5750 on a 450w psu.. is the psu a generic one or a pure branded one?

49-51 at idle 70-73 at full load (used furmark for 22mins) at 60-63% fan speed. one more thing.. the card is connected using dual molex to pcie connector.. but only one molex is connected to the psu.. i hope this is ok.. have been runnning the system like this for a year till now without any...