• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Recent content by lunatik

  1. L

    The RX 6000 series Owners' Club

    Anyone have any experience with grizzly conductonaut (liquid metal) as thermal paste? After one month of using arctic mx4 paste on my 6700xt, it pretty much stopped working for me few days ago.. I'm back to 30-40c delta between normal and junction temp (was 20-24c when used mx4) with my...
  2. L

    What is your max infinity fabric on ryzen 5000? September 2021 edition

    Hi, I've seen so many different recommendations for soc/ccd/iod/vddp voltage above 3800.. thought i'd just share my dr kit 4000/2000 cl16 (bios set voltages: soc 1.2v, ccd 1.09v, iod 1.12v, vddp 1v, i could probably lower them by 0.01-0.02v but more would result in instant whea errors, i don't...
  3. L

    The RX 6000 series Owners' Club

    Edit: discard all that, adrenalin just bugged out and didnt actually apply any settings global or warzone Edit: i remembered that i had some thermal paste left from my previous computer and changed it on both cpu and gpu. From the same default/stock settings and time spy loop my gpu temp...
  4. L

    The RX 6000 series Owners' Club

    So, i did a fresh windows install and also re-installed all the drivers. Put everything in stock/default. Gpu temp 63, hot spot 97 (front and top silent cover removed, also the ram fan) Gpu temp 62, hot spot 96 (+ the side panels removed) Edit: or maybe my testing methods are completely false...
  5. L

    The RX 6000 series Owners' Club

    I'll also try to tighten the screws. Don't really care that much about warranty, i'm just bored out of my mind with another lockdown. And if needed, i'll order thermal paste and pads too.
  6. L

    The RX 6000 series Owners' Club

    Yeah, might be..thought about it too while typing. Altough when i pushed this card to its current "max" limits, i didnt have that fan over ram. There's also my 5600x, running on a be quiet tower, cant remember the name, 1 fan tho. I'll test if it has any impact on temp with or without later...
  7. L

    The RX 6000 series Owners' Club

    Phanteks p500a, 3x 140mm front intake, 1x 140mm rear exhaust, 1x 140mm top exhaust and 1x140mm fan over ram. Gpu runs at 2780-2880mhz, 1110mv set in adrenalin (this is with junction temp 95-98 under full load). Just looking for ways to push it further, since lowering voltage would make it crash...
  8. L

    The RX 6000 series Owners' Club

    Are there any simple (not undervolt) ways to lower junction temp on 6700xt(sapphire nitro)? Problem being 55° on normal temp but hitting 100° on junction and crashes..seems like an issue with thermal pads or smth? Never really opened a gpu before. Or it's just normal with air cooled gpu?
  9. L

    The RX 6000 series Owners' Club

    Seems that power limit is not a problem for me since i could not improve my score. I went from 211 to 235 +15% (270W total). Most likely will still try and change smth else when i get the time to learn about it more.
  10. L

    The RX 6000 series Owners' Club

    Hi everyone, happened to find this forum looking for answer about mpt. Anyone know what could be tweaked on 6700xt? Have not touched mpt yet.. Could you only change max power or smth else too? Downloaded 3dmark timespy and with 5600x/6700xt i got 1st place atleast with 1 gpu overall (13459).
Top