• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Recent content by Merk

  1. M

    RealTemp General Discussion

    I am using a Hyper 212 Evo. I had set my Prime95 up with "Custom" settings by checking the bottom box when starting the stress test. The minimum fft size is 8kb this way (it may always be, not sure) and the second pass is when it uses the 8kb. I guess the way it works, the smaller the fft...
  2. M

    RealTemp General Discussion

    Just thought I would share the last bit of info with you guys that have been nice enough to help out. I found this site http://www.overclock.net/t/1291703/ivy-bridge-overclocking-guide-asus-motherboards and basically I used the information I found to adjust the settings on my motherboard. I...
  3. M

    RealTemp General Discussion

    Thanks for the links and the reassurance. After I posted those stock clocked temps with the tech inferno RealTemp, I boosted my turbo multipliers on all cores to 40. I ran Prime95 for 30 minutes and had no errors. I put Memtest on an USB drive and ran that for about 14 hours with absolutely no...
  4. M

    RealTemp General Discussion

    RealTemp T|I Results So here is what I came up with using RealTemp T|I. I ran Prime95 blend mode for just under 4 hours. Please see the attached image. Anyone care to comment on these temps? Ambient air in the room is 24 C. System is: i5-3570K stock default clocked 3.4 GHz with 3.8 GHz...
  5. M

    RealTemp General Discussion

    Thanks for the quick reply. I'll give the T|I a try and let you know how it goes. After I posted, I started scrolling back through this thread and I read a reply from several weeks ago that explained things pretty well.
  6. M

    RealTemp General Discussion

    Question on i5-3570K temp fluctuation on one core Hey Unclewebb, I have this question. I think that I may have a faulty cpu. At idle - low load, I see temps around 35 30 39 26 on my i5-3570K. It is on a Z77X-UP4 TH motherboard and it is not overclocked. Settings are pretty much at default...
Top