Recent content by MrPipa

I have an Asus K70AF laptop with AMD overdrive installed. I can under volt from 1.175V down all the way to 0.985V without problem, but when i restart the system it goes back to 1.175 OCCASIONALLY. The temperature drops with over 10 degrees Celsius because of the lower voltage so its quite...

Failure with consequenses. The BIOS didnt even have a bootblock... Last time I buy a ready comp, in the future I only buy piece by piece and build the comp. myself. Anyway, bought the Asrock G41-GS3 mobo, hopefully it will work. Thank you all for all the help! :toast:

Fortunately i realized today that floppydrives use the 34 pin connector, not IDE, so the floppy recovery method doesnt work. But if I buy the USB floppy drive, will it access the usb floppy as I havent so far got any life signs from the USB ports on the mobo? (The USB-floppy drive is also...

Woopsie. Well trying the HOME key combination now... No success, as I figured... Nothing on the screen, no beeps, nothing.

G41? How did you find out that :O And could you give examples (an ASUS would probably be the best alternative)? The board is pricy anyway because the ET1850 has an IGP and no graphics card at all, so wouldn't I be forced to either buy the G41 mobo and a gpu or a mobo with an IGP? The pc is...

It's, as I said in the first post, an acers motherboard (eMachines ET1850). Ive tried burning AMIBOOT.ROM on cd and pressing ctrl+winkey on boot both before powering up and right after powering up. No luck. As for tiggers answer, no, hotflashing is not possible as the chip is soldered in to the...

I have an eMachines ET1850 motherboard/pc that I flashed with, obviously, the wrong bios file:banghead:. The BIOS is therefor corrupt, the screen is black and there is no beep on bootup, not even with the ram taken out. (It's an AMI BIOS btw.) USB ports show no signs of life, CMOS is cleared...