Recent content by The King

Got some new DDR4 G.Skill Samsung B-die to play around with. Early first bin test it does 3600 CL14 with 1.4V vs 1.45V on my Patriot Viper 4400 C19 kit. Will do some higher FCLK testing in the week.

Please retest this with the correct settings. https://www.techpowerup.com/forums/threads/post-your-crystaldiskmark-speeds.250319/post-4871487

Are you getting full PCI-e 3.0 x16 test with GPU-Z Not sure if the PCi-e 3.0 will impact performance, but it looks like it does not in 3Dmark. Your GPU supports up to GEN 4 but mobo is limited to GEN 3. I would still check this. If its showing 3.0 x8, that could impact performance.

Try Try looking at the MT.CFG or profile *****.cfg file and see if it can be changed to run on 128GB.

I use the 1usmus_V3 profile vs Absolute profile for 25 cycles because there is a troubleshooting spreadsheet - TM5 Errors Deciphered. https://docs.google.com/spreadsheets/d/1A7G97QOL0dNMwJZa9SYEq2RElJ5T6Hcx9WdReTsnIWw/edit#gid=43560676 Good luck running 25 cycles on 128GB. :laugh: 32GB test...

RIP! what did you break now? :laugh: Lifetime warranty on those dimms?

This means that one or more of your cores does not like -20 @ 1.2250V. Usually high rated CPCC cores dont like too high negative CO. My best core gives me higher performance with -5 stable VS -30 unstable. Seems a tad low for 4600 all core try increasing it abit 1.23V-1.25V should be well...

Unstable CO can also also cause Y-cruncher 2.5B to fail so its not just about the system memory it goes to overall system stability. OCCT is also a good to run for overall system stability testing but that needs at least 1 hour and it detects WHEA errors which is something other tests don't...

This is not 100% true. Even if you lock your CPU to an all core load running any PBO limt (EDC TDC PPT) will still work and CO will still work in the sense that it will still reduce voltage to the core but not increase its clock speed. New version of PBO2 tuner has a builtin monitor function...

https://valid.x86.fr/je9l4b https://valid.x86.fr/gy8may

Soon is taking too long. :p j/k Problem with the CPU, waiting for replacement? or did AMD not send 1 for testing?

:laugh: