Recent content by xXDynamosXx

yea, i know 70c is understandable and im not sure its been like this for a while tho. if i leave my pc off then boot it up and go right into FEAR and do a benchmark with maxeverything and 1280x1024 reso i can get pretty much 100% above 40FPS with average of about 100fps but give it some 3-5mins...

I own a rig with HIS radeon X1950XT with IceQ3 cooler, with a AMD athlon 64 X2 5600+ (2.8ghz) 2Gb of corsair XMS2 DDR2800 ram, lately i've been seeing real performance problems with my gfx card while playing FEAR. the card should be able to play the game with maximum graphics and maximum cpu...

ok! i got everything set up and it works perfectly FINALY the results i expected from this card when i bought it thankyou very much for all you help you've made me one happy gamer =D I also took the time to tweak a profile for Low Power and low temp and yet is more than adequate for desktop...

naw its not overheating first off its an IceQ3 cooler which are like some of the best otuer there and second when the 3d clocks are set the fan is at 70% and the temps are in the 50s its like some stupid setting or something and i dunno what to change to make it work o.o

yea it works i can get 954 and like 960 memory but when i load fear it goes back to 2D clocks o_o know how to fix that? Edit: yea the 675 and 972 also work

Excelent, so what should the voltage be at for say 650 / 1800 (the iturbo set speeds) and I hope this works if so then many MANY thanks to you :)

Still no good, same results with 0.27 Beta 2 Im gonig to reinstall windows as I should anyways since my new hardware is slightly conflicting with my windows install. i'll install CCC 7-6 once my reinstall is complete and hopefully that will help if not maybe my card is defective (just my luck)...

No the games performance hasnt really dropped from my old power supply however it hasnt increased either. im running Catalyst Control Drivers 7-6 for x64 and ATi tool 0.26 i guess what i really want to know is is 21A on 12V1+ and 22A on 12V2+ enough or should it be enoguh to power a card that...

Hey guys, i bought an HIS radeon X1950XT a few months back (around january) and its been working decently however it stays in 2D clock speeds 499 core 594 memory and when i try to loa the default 3D clocks 621/900 and run the 3d test in ati tool the system artifacts and crashes untill CCC resets...

im installing MCE 2005 on a friends PC at the moment and I will be installnig 3dmark05 on my pc afterwards, i'll post the results after:)

yea my cpu is 100% stable never crashes the OS.. however i was running 3dmark05 on Vista now that im back on xp x64 im going to try it one more time

@ Dom I tried running 3dmark 05 and when i start the benchmarking the systems freezes and reboots :cry:

I will try 3dmark05 as soon as it download here, however im pretty sure that this is a Inadequate power supply problem here

It atifacts for one and resuming fro mthe screensaver is very messed up makes the screen very artifacted for a breif moment.. so im not sure... those voltage levels are those stock or did you modify those on your own? Also, When the voltage is turned up and im running the fuzzy cube thing at...

Not sure but If I we're you i'd stay away from saphire all together, their Cards runs at a higher temp than that of HIS