• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

[Case Gallery] Subtle i7 Build

Joined
Sep 14, 2006
Messages
664 (0.10/day)
Location
QLD, Australia
Processor Ryzen 9 7950X3D
Motherboard Asus ROG X670E GENE MATX
Cooling Phanteks Glacier One 280MPH AIO
Memory G.Skill 48GB (2x24GB) F5-8000J4048F24GX2-TZ5RK Trident Z5 RGB 8000MHz DDR5
Video Card(s) ASUS TUF Gaming Radeon RX 7900 XTX OC Edition 24GB GDDR6
Storage Crucial T700 Gen5 2TB NVMe | Crucial P5 Plus Gen4 2TB NVMe | Crucial P5 Plus Gen4 1TB NVMe
Display(s) AOC U3277PWQU 32in 4K
Case Phanteks Enthoo Evolv mATX TG
Audio Device(s) Onboard SPDIF --> Logitech Z-5500
Power Supply Seasonic ATX 3.0 VERTEX-GX-1000
Mouse Razer Mamba Chroma
Keyboard Razer Cynosa V2 Chroma
Software W11 Pro 64 bit
To view this case mod, go here.



Specs:
Lian Li PC-V1110, ASUS P6T Deluxe V2, Corsair TX-850 850W, i7 920 D0, XFX GTX275, Corsair TR3X6G1600C8D 6GB, OCZ Vertex SSD 60GB, Western Digital Green 500GB WD5000AACS, Swiftech Apogee GTZ, Swiftech MCP655-B, Swiftech MCR220-QP

Mods:
Removed bottom drive cages, mounted radiator with custom bracket, installed radiator exhaust in side panel, moded drive cage to fit inside 5.25" bays, general cable management.

The aim was to complete a watercooled build but still leaving the impression that the case was not heavily modded.
 
Last edited by a moderator:
Joined
Oct 21, 2008
Messages
3,459 (0.61/day)
Location
95350
Processor ???
Motherboard 760
Cooling HK
Memory 3x1gb
Video Card(s) 285 Classified / EVGA 480
Display(s) 22" Acer /42" Toshiba
Case Stacker
Power Supply Toughpower 1000w / Coolmaster 650w
Software All of them
9/10
looks nice
 

Binge

Overclocking Surrealism
Joined
Sep 15, 2008
Messages
6,979 (1.23/day)
Location
PA, USA
System Name Molly
Processor i5 3570K
Motherboard Z77 ASRock
Cooling CooliT Eco
Memory 2x4GB Mushkin Redline Ridgebacks
Video Card(s) Gigabyte GTX 680
Case Coolermaster CM690 II Advanced
Power Supply Corsair HX-1000
5/10. I love water cooling for i7s but you just have excessive tubing to keep it "neat" and in doing that it seems cluttered.
 
Joined
Nov 17, 2007
Messages
2,228 (0.37/day)
Location
Larisa, Greece
System Name StarCruiser Dark Knight v.2
Processor Intel® Core™ i5-3570K
Motherboard P8Z77-V LX
Cooling 1x custom W/C loop/ inflow:6x120 /outflow:4x120, 2x200
Memory Viper 3 Black Mamba (4x4GB)
Video Card(s) Powercolor LCS 5870
Storage 1X 128GB OCZ, 2 x 1.500 Gb Seagate
Display(s) Samsung 24" LC24F396
Case custom MDF case (I BUILT IT) check sig.....NOW
Audio Device(s) Onboard
Power Supply Tagan 900 watt
Software Win 7 RC / Open office / Games
5/10. I love water cooling for i7s but you just have excessive tubing to keep it "neat" and in doing that it seems cluttered.

Still, he did an excellent job keeping it tidy!
 
Joined
Sep 14, 2006
Messages
664 (0.10/day)
Location
QLD, Australia
Processor Ryzen 9 7950X3D
Motherboard Asus ROG X670E GENE MATX
Cooling Phanteks Glacier One 280MPH AIO
Memory G.Skill 48GB (2x24GB) F5-8000J4048F24GX2-TZ5RK Trident Z5 RGB 8000MHz DDR5
Video Card(s) ASUS TUF Gaming Radeon RX 7900 XTX OC Edition 24GB GDDR6
Storage Crucial T700 Gen5 2TB NVMe | Crucial P5 Plus Gen4 2TB NVMe | Crucial P5 Plus Gen4 1TB NVMe
Display(s) AOC U3277PWQU 32in 4K
Case Phanteks Enthoo Evolv mATX TG
Audio Device(s) Onboard SPDIF --> Logitech Z-5500
Power Supply Seasonic ATX 3.0 VERTEX-GX-1000
Mouse Razer Mamba Chroma
Keyboard Razer Cynosa V2 Chroma
Software W11 Pro 64 bit
Still, he did an excellent job keeping it tidy!

Having a res increases the amount of tubes, not sure how else I could have made it neater as the placement of the res was the best I could come up with?
 
Joined
Nov 17, 2007
Messages
2,228 (0.37/day)
Location
Larisa, Greece
System Name StarCruiser Dark Knight v.2
Processor Intel® Core™ i5-3570K
Motherboard P8Z77-V LX
Cooling 1x custom W/C loop/ inflow:6x120 /outflow:4x120, 2x200
Memory Viper 3 Black Mamba (4x4GB)
Video Card(s) Powercolor LCS 5870
Storage 1X 128GB OCZ, 2 x 1.500 Gb Seagate
Display(s) Samsung 24" LC24F396
Case custom MDF case (I BUILT IT) check sig.....NOW
Audio Device(s) Onboard
Power Supply Tagan 900 watt
Software Win 7 RC / Open office / Games
Having a res increases the amount of tubes, not sure how else I could have made it neater as the placement of the res was the best I could come up with?

The best you could do is to place the res right before the pump.....
Now, if you think is going to get crouded in there, then just leave it as it is....
 
Joined
Sep 14, 2006
Messages
664 (0.10/day)
Location
QLD, Australia
Processor Ryzen 9 7950X3D
Motherboard Asus ROG X670E GENE MATX
Cooling Phanteks Glacier One 280MPH AIO
Memory G.Skill 48GB (2x24GB) F5-8000J4048F24GX2-TZ5RK Trident Z5 RGB 8000MHz DDR5
Video Card(s) ASUS TUF Gaming Radeon RX 7900 XTX OC Edition 24GB GDDR6
Storage Crucial T700 Gen5 2TB NVMe | Crucial P5 Plus Gen4 2TB NVMe | Crucial P5 Plus Gen4 1TB NVMe
Display(s) AOC U3277PWQU 32in 4K
Case Phanteks Enthoo Evolv mATX TG
Audio Device(s) Onboard SPDIF --> Logitech Z-5500
Power Supply Seasonic ATX 3.0 VERTEX-GX-1000
Mouse Razer Mamba Chroma
Keyboard Razer Cynosa V2 Chroma
Software W11 Pro 64 bit
The best you could do is to place the res right before the pump.....
Now, if you think is going to get crouded in there, then just leave it as it is....

That does make sense though I think it will get too crowded plus maintenance is easy the way it is. I could have left the res out and place a 'T' piece for a fill port and cap it through the middle tray I suppose. I think I may just leave as is on 2nd thought. Thanks for the input :)
 
Joined
Nov 17, 2007
Messages
2,228 (0.37/day)
Location
Larisa, Greece
System Name StarCruiser Dark Knight v.2
Processor Intel® Core™ i5-3570K
Motherboard P8Z77-V LX
Cooling 1x custom W/C loop/ inflow:6x120 /outflow:4x120, 2x200
Memory Viper 3 Black Mamba (4x4GB)
Video Card(s) Powercolor LCS 5870
Storage 1X 128GB OCZ, 2 x 1.500 Gb Seagate
Display(s) Samsung 24" LC24F396
Case custom MDF case (I BUILT IT) check sig.....NOW
Audio Device(s) Onboard
Power Supply Tagan 900 watt
Software Win 7 RC / Open office / Games
That does make sense though I think it will get too crowded plus maintenance is easy the way it is. I could have left the res out and place a 'T' piece for a fill port and cap it through the middle tray I suppose. I think I may just leave as is on 2nd thought. Thanks for the input :)

...until you decide to redo the whole thing... ;)

btw have you checked my rig? http://www.techpowerup.com/gallery/2097.html
 

Binge

Overclocking Surrealism
Joined
Sep 15, 2008
Messages
6,979 (1.23/day)
Location
PA, USA
System Name Molly
Processor i5 3570K
Motherboard Z77 ASRock
Cooling CooliT Eco
Memory 2x4GB Mushkin Redline Ridgebacks
Video Card(s) Gigabyte GTX 680
Case Coolermaster CM690 II Advanced
Power Supply Corsair HX-1000
I'm not trying to get into a flame with anyone I'm thinking if you could have had the outlets of the rad closer to the psu side, and the pump and res could be joined and mounted on the 2nd level using a rigid short length of tubing. With an mcp355 most people use the aftermarket tops to join the micro res to the inlet with a dual threaded 1/2" ID connector fitting.
 
Joined
Nov 17, 2007
Messages
2,228 (0.37/day)
Location
Larisa, Greece
System Name StarCruiser Dark Knight v.2
Processor Intel® Core™ i5-3570K
Motherboard P8Z77-V LX
Cooling 1x custom W/C loop/ inflow:6x120 /outflow:4x120, 2x200
Memory Viper 3 Black Mamba (4x4GB)
Video Card(s) Powercolor LCS 5870
Storage 1X 128GB OCZ, 2 x 1.500 Gb Seagate
Display(s) Samsung 24" LC24F396
Case custom MDF case (I BUILT IT) check sig.....NOW
Audio Device(s) Onboard
Power Supply Tagan 900 watt
Software Win 7 RC / Open office / Games
I'm not trying to get into a flame with anyone I'm thinking if you could have had the outlets of the rad closer to the psu side, and the pump and res could be joined and mounted on the 2nd level using a rigid short length of tubing. With an mcp355 most people use the aftermarket tops to join the micro res to the inlet with a dual threaded 1/2" ID connector fitting.

....and you are absolutely correct! truly!
 
Joined
Sep 14, 2006
Messages
664 (0.10/day)
Location
QLD, Australia
Processor Ryzen 9 7950X3D
Motherboard Asus ROG X670E GENE MATX
Cooling Phanteks Glacier One 280MPH AIO
Memory G.Skill 48GB (2x24GB) F5-8000J4048F24GX2-TZ5RK Trident Z5 RGB 8000MHz DDR5
Video Card(s) ASUS TUF Gaming Radeon RX 7900 XTX OC Edition 24GB GDDR6
Storage Crucial T700 Gen5 2TB NVMe | Crucial P5 Plus Gen4 2TB NVMe | Crucial P5 Plus Gen4 1TB NVMe
Display(s) AOC U3277PWQU 32in 4K
Case Phanteks Enthoo Evolv mATX TG
Audio Device(s) Onboard SPDIF --> Logitech Z-5500
Power Supply Seasonic ATX 3.0 VERTEX-GX-1000
Mouse Razer Mamba Chroma
Keyboard Razer Cynosa V2 Chroma
Software W11 Pro 64 bit
I'm not trying to get into a flame with anyone I'm thinking if you could have had the outlets of the rad closer to the psu side, and the pump and res could be joined and mounted on the 2nd level using a rigid short length of tubing. With an mcp355 most people use the aftermarket tops to join the micro res to the inlet with a dual threaded 1/2" ID connector fitting.

There's no argument, criticsm is constructive, you are correct ;)
 
Joined
Nov 28, 2006
Messages
2,325 (0.37/day)
Location
Houston
System Name mult1kill
Processor Ryzen 7 1700X @ 3.7
Motherboard GA-AX370-GAMING 5
Cooling Cryorig H7
Memory Team Group 32gb 3200mhz
Video Card(s) RTX 2060
Storage Seagate 3TB+ Corsair 120GB SSD+120 ssd smansung 256gb m.2 Samsung 970
Case NZXT S340
Audio Device(s) Sundara JDS Labs Atom
Power Supply FSP HydroG 850W
Mouse WMO
Keyboard Ducky Shine 3
Software Windows10
7/10

theres not really any noticeable mods but I dont love your rig for what it is with out the mods so I will probably bump that up to a 8/10 I like it good job
 
Joined
Aug 18, 2006
Messages
993 (0.15/day)
Location
Los Angeles...U.S.A
Processor i7 920
Motherboard EVGA X58
Cooling eight 120mm fans, Swiftech GTZ cpu block, 3 120mm radiator, MCP655 pump, primochill tubing
Memory 6 gig G-Skill DDR3 1600
Video Card(s) GTX 285's (SLI)
Storage 500GB Western Digital
Display(s) 3 Asus 23 in inchers
Case Lian Li A77B
Audio Device(s) on board 7.1
Power Supply Corsair 1000
Software win 7 64
I like it. 8/10
 
Joined
Sep 14, 2006
Messages
664 (0.10/day)
Location
QLD, Australia
Processor Ryzen 9 7950X3D
Motherboard Asus ROG X670E GENE MATX
Cooling Phanteks Glacier One 280MPH AIO
Memory G.Skill 48GB (2x24GB) F5-8000J4048F24GX2-TZ5RK Trident Z5 RGB 8000MHz DDR5
Video Card(s) ASUS TUF Gaming Radeon RX 7900 XTX OC Edition 24GB GDDR6
Storage Crucial T700 Gen5 2TB NVMe | Crucial P5 Plus Gen4 2TB NVMe | Crucial P5 Plus Gen4 1TB NVMe
Display(s) AOC U3277PWQU 32in 4K
Case Phanteks Enthoo Evolv mATX TG
Audio Device(s) Onboard SPDIF --> Logitech Z-5500
Power Supply Seasonic ATX 3.0 VERTEX-GX-1000
Mouse Razer Mamba Chroma
Keyboard Razer Cynosa V2 Chroma
Software W11 Pro 64 bit
Joined
Jan 2, 2008
Messages
3,296 (0.56/day)
System Name Thakk
Processor i7 6700k @ 4.5Ghz
Motherboard Gigabyte G1 Z170N ITX
Cooling H55 AIO
Memory 32GB DDR4 3100 c16
Video Card(s) Zotac RTX3080 Trinity
Storage Corsair Force GT 120GB SSD / Intel 250GB SSD / Samsung Pro 512 SSD / 3TB Seagate SV32
Display(s) Acer Predator X34 100hz IPS Gsync / HTC Vive
Case QBX
Audio Device(s) Realtek ALC1150 > Creative Gigaworks T40 > AKG Q701
Power Supply Corsair SF600
Mouse Logitech G900
Keyboard Ducky Shine TKL MX Blue + Vortex PBT Doubleshots
Software Windows 10 64bit
Benchmark Scores http://www.3dmark.com/fs/12108888
Looks good.

Ive a few rants though. Change the weak Swiftech MCR220 using that for an i7 is poor choice. Change the plastic clamps or use compression fittings. Use an ek res, swiftech res are fugly imo. Tubings are quite long for just cooling one component.

Otherwise, its cool system, and a sweet case to boot. 7/10
 
Joined
Sep 14, 2006
Messages
664 (0.10/day)
Location
QLD, Australia
Processor Ryzen 9 7950X3D
Motherboard Asus ROG X670E GENE MATX
Cooling Phanteks Glacier One 280MPH AIO
Memory G.Skill 48GB (2x24GB) F5-8000J4048F24GX2-TZ5RK Trident Z5 RGB 8000MHz DDR5
Video Card(s) ASUS TUF Gaming Radeon RX 7900 XTX OC Edition 24GB GDDR6
Storage Crucial T700 Gen5 2TB NVMe | Crucial P5 Plus Gen4 2TB NVMe | Crucial P5 Plus Gen4 1TB NVMe
Display(s) AOC U3277PWQU 32in 4K
Case Phanteks Enthoo Evolv mATX TG
Audio Device(s) Onboard SPDIF --> Logitech Z-5500
Power Supply Seasonic ATX 3.0 VERTEX-GX-1000
Mouse Razer Mamba Chroma
Keyboard Razer Cynosa V2 Chroma
Software W11 Pro 64 bit
Looks good.

Ive a few rants though. Change the weak Swiftech MCR220 using that for an i7 is poor choice. Change the plastic clamps or use compression fittings. Use an ek res, swiftech res are fugly imo. Tubings are quite long for just cooling one component.

Otherwise, its cool system, and a sweet case to boot. 7/10

Appreciate the input. Firstly, there is not too much choice where I live for decent rad's but actually I have been looking as I am aware that the MCR220 isn't the best performing but will do for the moment. I am planning on tidying up the res placement also, still figuring the best options. I have been looking at the the Feser RX240 Radiator-Double, not sure if any good but it should definatley have more cooling capacity.
 
Joined
Mar 5, 2007
Messages
1,372 (0.22/day)
Location
Chicago, IL
System Name Stealth 2 Duo Turbine
Processor Intel e6850 @ 3.8ghz
Motherboard Asus Striker Extreme
Cooling CoolerMaster V8 Modded With 2 white LED's & 100CFM fan
Memory OCZ DDR2 1066_ SLI Black-4GB
Video Card(s) 2xMSI 8800GT"s SLI
Storage <<HDD For OS>> 2x150GB_Western Digital Raptor_Raid 0. <<HDD For Storage>> 3 x 1TB
Display(s) ACER B273HU 27" LCD 2048x1152
Case Apex SuperCase_Custom 7 month Build
Audio Device(s) Striker Extreme Add-In Card HD-Audio
Power Supply EnerMax INFINITI 720watt
Software SE7VEN ULTIMATE 64bit
Benchmark Scores 3DMark01=NTTA, 3Dmark06=NTTA 3Dmark_Vantage=NTTA, Core Temp v0.99.5=28C
Very clean build with nice hardware,, I'm sure you'll do other mods later,, still a solid build.
 
Top