Your PC ATM

[brandonwh64]

Im thinking of selling my HAF 932 case. Im getting bored of it and since i dont have water cooling anymore i dont need a full tower case. How much do you guys think i can get out of it?

 

[TheGrapist]

Im thinking of selling my HAF 932 case. Im getting bored of it and since i dont have water cooling anymore i dont need a full tower case. How much do you guys think i can get out of it?

it's going for $120 shipped @ newegg,imo you could probably get $80(?)

 

[brandonwh64]

Probly, its the AMD edition with a regular sidepanel, the insides have been painted black

 

[LAN_deRf_HA]

Don't think I've ever shown the whole setup. Just noticed how big of a mess the right side, especially in contrast to the left.

 

[Athlonite]

it's a nest a weaver bird would be happy to live in LOL looks just like mine clean where you sit but anywhere else well??? you can guess

 

[pabloc74]

win



put some fans

 

[Velvet Wafer]

http://img.techpowerup.org/110226/IMG_3507.jpg

win

http://img.techpowerup.org/110226/CMV10 loadtesting.jpg

sorry CDA, but after looking at the Pics 5 times, i still dont get what is win about that?
if the screen would have shown 4.2 ghz, the thing unlocked to 4 cores, well that would be a big WIN. but why 2875? i need explanations!

 

[Thrackan]

sorry CDA, but after looking at the Pics 5 times, i still dont get what is win about that?
if the screen would have shown 4.2 ghz, the thing unlocked to 4 cores, well that would be a big WIN. but why 2875? i need explanations!

20C stressed is pretty pwn to me

 

[Velvet Wafer]

20C stressed is pretty pwn to me

where do you see that? i can see 37c under load in that screen.

 

[Thrackan]

where do you see that? i can see 37c under load in that screen.

Under "AMD K10".

 

[Velvet Wafer]

Under "AMD K10".

ah, indeed! but whats with the socket temperature? its not normal that its at 37c, when the cores are under 20

 

[Thrackan]

The V10 has a pelt element built in I believe.

 

[Velvet Wafer]

The V10 has a pelt element built in I believe.

it has, but that does not explain the strange readings... with a peltier and that much air cooling,under 20c core,on open air, i find all the other temps quite high.
If you cool with something below room temp, it should start to pull temperature from the board, as the copper in the PCB transfers it. that combined with a few good fans.... would be very cool normally
I would love if CDA could stick a sensor to the base and show the real temps for us

 

[Athlonite]

The V10 has a pelt element built in I believe.

why yes it does but it's getting it to do it's thing now that's the trick

 

[techtard]

Sorry for the low quality pics, only have an old phone handy ATM...

Temporarily decommissioned AMD Phenom II 940 budget gamer. (Awaiting new bios chip from e-bay)
Cables are messy because I was going nuts troubleshooting a while back. No sense cleaning it up until I get the system back up and running.


Uploaded with ImageShack.us
Temp internet surfing box / backup : 2gb ddr2 667, 92mm AC-64, AMD Athlon 64 x2 4800+, K8m800 micro mobo, IDE/Pata HDD, x1950 Pro AGP 256mb
Terrible cable management -- temp box, don't care if it's ugly LOL.


Uploaded with ImageShack.us

 

[(FIH) The Don]

got the new mb, cpu, ram and cooler installed, now i just need a new ssd, and a dvdburner with sata

and new case

 

[Cold Storm]

got the new mb, cpu, ram and cooler installed, now i just need a new ssd, and a dvdburner with sata

and new case



http://img.techpowerup.org/110302/004.jpg

Glad to see you back man!

@techtard

Don't you hate it? when you have to work on a case, after fixing it up so well? PITA..

 

[(FIH) The Don]

thank you

got tired of the case already

 

[HammerON]

Open air is soooo nice

 

[cdawall]

sorry CDA, but after looking at the Pics 5 times, i still dont get what is win about that?
if the screen would have shown 4.2 ghz, the thing unlocked to 4 cores, well that would be a big WIN. but why 2875? i need explanations!

CH3+AX2 5200== they didn't work well together...

20C stressed is pretty pwn to me

i would add 10C to that

where do you see that? i can see 37c under load in that screen.

socket temps....

Under "AMD K10".

AMD core temps are 10-12C off up to 50C then they start to even out

ah, indeed! but whats with the socket temperature? its not normal that its at 37c, when the cores are under 20

bad temp sensors in combo with bad temp sensors

The V10 has a pelt element built in I believe.

yup and mine is swapped for a 91w and i have a 168w on the way

it has, but that does not explain the strange readings... with a peltier and that much air cooling,under 20c core,on open air, i find all the other temps quite high.
If you cool with something below room temp, it should start to pull temperature from the board, as the copper in the PCB transfers it. that combined with a few good fans.... would be very cool normally
I would love if CDA could stick a sensor to the base and show the real temps for us

OPT3 is a temp probe on the cold side of the TEC it on the back of the heatpipes so it goes heatpipe->plate->TEC its going to be a little hotter than the actual cold side i found another one of my probes so going to put that on the hot side.

why yes it does but it's getting it to do it's thing now that's the trick

i removed the TEC controller so its doing its thing

 

[MattNo5ss]

Hey guys! My first post here, so I thought I'd post a pic of my current daily driver. PSU wires are a mess because I don't have it on the bottom tier of my bench station...

 

[cdawall]

Hey guys! My first post here, so I thought I'd post a pic of my current daily driver.

http://www.techpowerup.com/forums/attachment.php?attachmentid=40894&d=1299130643

http://www.techpowerup.com/forums/profile.php?do=specs

fill out your sys specs so we know what your running

 

[MattNo5ss]

I didn't notice there was a system specs...I was gonna wait until I was allowed to make a sig... I'll get that done in a min, thanks for the heads-up.

EDIT: System specs updated. My usual PSU, the X-750, is in a case I'm reviewing, so a Corsair 550VX is in the pic above. I added the url to my HWBot profile in the benchmark field, if that's not okay I'll remove it.

 

[Velvet Wafer]

CH3+AX2 5200== they didn't work well together...



i would add 10C to that



socket temps....



AMD core temps are 10-12C off up to 50C then they start to even out



bad temp sensors in combo with bad temp sensors



yup and mine is swapped for a 91w and i have a 168w on the way



OPT3 is a temp probe on the cold side of the TEC it on the back of the heatpipes so it goes heatpipe->plate->TEC its going to be a little hotter than the actual cold side i found another one of my probes so going to put that on the hot side.



i removed the TEC controller so its doing its thing

Thats what i thought, when i saw that reading... something in the dark corners of my mind reminded me, that all C3 steppings have bugged sensors, that show way too low temps... sometimes under room temp, with aircoolers for example

anyways, i think its a great air cooled testbed, and the next proc you get in your fingers, will probably end up at 4.4ghz plus... i guess, if bulldozer will be as good as proposed (hopefully) you will have much fun with that setup, especially with a 150w tec!

 

[cdawall]

Thats what i thought, when i saw that reading... something in the dark corners of my mind reminded me, that all C3 steppings have bugged sensors, that show way too low temps... sometimes under room temp, with aircoolers for example

anyways, i think its a great air cooled testbed, and the next proc you get in your fingers, will probably end up at 4.4ghz plus... i guess, if bulldozer will be as good as proposed (hopefully) you will have much fun with that setup, especially with a 150w tec!

thats the goal i need to get me one of them ECS is sending me a 990FX board on release so it should be fun