Thermal Paste - Q6600 Overclocking

freebie · Mar 19, 2011

Hi everyone,

I've read round hundreds of different posts now, and i'm at a loss.

I have a q6600 which im overclocking. I have a Zalman CNPS 9900 NT cooler.

I've overclocked so far too 2.8ghz, but im gettings temps of 90/95c degrees under load.

I think this is too hot! (not sure if i'm right) (but i know that its hot)

I spread thermal paste on my processor but should i have put a line down the middle or a peas sized blob or have I done it right???

Help?!?!?!

2DividedbyZero · Mar 19, 2011

a line down the middle is what I did when i had a Q6600

check your heatsink is actually sitting correctly, sounds like it may not be.

freebie · Mar 20, 2011

Cheers for your help, i just had a look at your system specs and saw that you have a H70, i'm thinking of upgrading my Zalman to the new Corsair H60 when it comes out, would you reccommend?

mlee49 · Mar 20, 2011

Definately upgrade that Zalman, a Corsair Hx0 would be an excellent upgrade.

CrAsHnBuRnXp · Mar 20, 2011

What stepping is it? IIRC, the B3 stepping ran way hotter than the C1 but the C1 also didnt overclock as well as the B3 either. So it was a lose/lose situation.

Definately wanna make sure the cooler is sitting on there tight and put a line across like is shown in post 2.

stevednmc · Mar 20, 2011

That is way to hot. Im not comfortable going much above 70c. You should reseat that cooler , applying a line down the center of TIM.

ctrain · Mar 21, 2011

sounds like your heatsink isn't mounted well, those temps are completely abnormal

newtekie1 · Mar 21, 2011

freebie said:
I spread thermal paste on my processor but should i have put a line down the middle or a peas sized blob or have I done it right???

If you spread the TIM before putting on the heatsink, then you likely created a lot of air bubbles when you put the cooler on, which is probably a big part of your problem.

Clean the old TIM off and just put a half pea sized dot in the middle of the CPU, then apply the heatsink on, the pressure from mounting the heatsink will spread the TIM for you without air bubbles.

erocker · Mar 21, 2011

ctrain said:
sounds like your heatsink isn't mounted well, those temps are completely abnormal

Agreed. You do not get temps that hot due to an application of thermal grease. Your cooler isn't mounted properly.

neoreif · Mar 21, 2011

+1 to Erocker and ctrain! I'd reseat that cooler first before inspecting the TIM! 90degrees celsius is way up already! Almost near TDP! :eek:

Peter1986C · Mar 21, 2011

Preferably take the motherboard out of the case (assuming there is no inspection hole behind the right side panel), and check whether you not only see white pins coming through the mounting holes but also some black pin (in between the "legs" of the white pins).

freebie · Mar 22, 2011

Chevalr1c said:
Preferably take the motherboard out of the case (assuming there is no inspection hole behind the right side panel), and check whether you not only see white pins coming through the mounting holes but also some black pin (in between the "legs" of the white pins).

It's screws that come through the back plate?!?!?! :confused:

Cheers for all your help guys! Have checked cooler is on tight and seems to be, tightened it as much as i could and now im about 5 degrees cooler on 2.8ghz (311 x 9.0) 1.300v.

Going to see if its any more stable, and then get the h60 when it comes out, that way at least my cooler is future proof, thanks everyone.

95Viper · Mar 22, 2011

That Zalman is a grand cooler, I use them.
I have cnps9900led on my qx9650 and a cnps9900max on my i7-950.
But, IMO, if you are going to OC then, I would move away from air and go liquid, like others have mentioned.

I don't see, or I overlooked, what type TIM you are using. Some thermal pastes have a set-up period, so your temps may improve over time.
Also, take into consideration your ambient temps.
Make sure you have good air flow in that case and the zalman is exhausting toward a fan that is exhausting out of the case.

Peter1986C · Mar 22, 2011

freebie said:
It's screws that come through the back plate?!?!?!

Well, I assumed that your cooler uses the standard LGA775 mounting system with those push pins.

freebie · Mar 23, 2011

Chevalr1c said:
Well, I assumed that your cooler uses the standard LGA775 mounting system with those push pins.

Oh I understand what you meant now. Sorry!!

Brilford Wimley · Mar 23, 2011

Have you checked to see if your cpu or heatsink needs to be lapped?

Occasionally there is a manufacturing defect on one or the other causing
a gap (air space) between the two.

Here's a short vid. There are lots of them.

http://www.youtube.com/watch?v=_XIYHT03Ie4

Bo$$ · Mar 23, 2011

CrAsHnBuRnXp said:
What stepping is it? IIRC, the B3 stepping ran way hotter than the C1 but the C1 also didnt overclock as well as the B3 either. So it was a lose/lose situation.

Definately wanna make sure the cooler is sitting on there tight and put a line across like is shown in post 2.

G0 is the cooler stepping not C1

What voltage are you putting through it?

I use a small centralized blob on mine and it works wonders, never exceeds 55C during anything but linpack

Bjorn_Of_Iceland · Mar 23, 2011

a few micro specs of air bubbles wont make such a drastic change in temps. Try adding a filler paper at your back plate to raise it a bit, and compress your heatsink more.

Bo$$ · Mar 23, 2011

Bjorn_Of_Iceland said:
a few micro specs of air bubbles wont make such a drastic change in temps. Try adding a filler paper at your back plate to raise it a bit, and compress your heatsink more.

he may be putting too much paste, then not tightening

but this sounds like he is pumping WAY too much voltage through that poor processor

freebie · Mar 23, 2011

I've got 1.3000v going through it. these are temps without running any stress tests or using pc, switch it on and then let everything load then screenshot.

i've checked my cooler is on tight, i'm going to reseat it when i get chance.

freebie · Mar 23, 2011

Bjorn_Of_Iceland said:
a few micro specs of air bubbles wont make such a drastic change in temps. Try adding a filler paper at your back plate to raise it a bit, and compress your heatsink more.

stupid question - Whats filler paper?

overclocking101 · Mar 23, 2011

its like a spacer to add mounting preassure. really anything will work pennies quarters cardboard. something to wedge it more so it makes better contact

ctrain · Mar 24, 2011

you didn't do something silly like forget to remove the film before putting the heatsink on did you?

95Viper · Mar 24, 2011

Run prime95, realtemp and cpuz.
Take screen shots and post.

Plus, after everything loads, does your cpu load ever go lower than the 43% to 55% in that screen shot in post #20? :confused:

'Cause it looks like your system ain't idle, it is doing something. :ohwell:

freebie · Mar 24, 2011

ctrain said:
you didn't do something silly like forget to remove the film before putting the heatsink on did you?

Lol, definitely removed the film!

Processor	Intel Q6600 3.2 ghz (356 * 9)
Motherboard	ASUS P5B Deluxe WIFI/AP
Cooling	Corsair h60 with extra fan (push/pull)
Memory	6gb DDR2-800mhz (Kingston Blue Hyper X 2x2GB) (Kingston Ram 2x1gb) @ 5-6-6-18
Video Card(s)	Nvidia Gtx 280 XFX
Storage	2 x Crucial c300 64gb ssd (raid 0) \| 2 x Wd 320gb (raid 0)
Display(s)	2 x 23" AOC e2343f led monitors
Case	Coolermaster Elite 430
Power Supply	Powercool 750w Modular PSU
Software	Windows 7 Ultimate 64bit

Processor	Intel Q6600 3.2 ghz (356 * 9)
Motherboard	ASUS P5B Deluxe WIFI/AP
Cooling	Corsair h60 with extra fan (push/pull)
Memory	6gb DDR2-800mhz (Kingston Blue Hyper X 2x2GB) (Kingston Ram 2x1gb) @ 5-6-6-18
Video Card(s)	Nvidia Gtx 280 XFX
Storage	2 x Crucial c300 64gb ssd (raid 0) \| 2 x Wd 320gb (raid 0)
Display(s)	2 x 23" AOC e2343f led monitors
Case	Coolermaster Elite 430
Power Supply	Powercool 750w Modular PSU
Software	Windows 7 Ultimate 64bit

System Name	The Dove Box Rev 3.0
Processor	i7 8700k @ 4.7GHz
Motherboard	Asus Maximus X APEX
Cooling	Custom water loop
Memory	16GB 3600 MHz DDR4
Video Card(s)	2x MSI 780 Ti's in SLI
Storage	500GB Samsung 850 PCIe SSD, 4TB
Display(s)	27" Asus 144Hz
Case	Enermax Fulmo GT
Audio Device(s)	ON BOARD FTW
Power Supply	Corsair 1200W
Keyboard	Logitech G510
Software	Win 10 64x

Processor	Intel i9 9900K @5GHz w/ Corsair H150i Pro CPU AiO w/Corsair HD120 RBG fan
Motherboard	Asus Z390 Maximus XI Code
Cooling	6x120mm Corsair HD120 RBG fans
Memory	Corsair Vengeance RBG 2x8GB 3600MHz
Video Card(s)	Asus RTX 3080Ti STRIX OC
Storage	Samsung 970 EVO Plus 500GB , 970 EVO 1TB, Samsung 850 EVO 1TB SSD, 10TB Synology DS1621+ RAID5
Display(s)	Corsair Xeneon 32" 32UHD144 4K
Case	Corsair 570x RBG Tempered Glass
Audio Device(s)	Onboard / Corsair Virtuoso XT Wireless RGB
Power Supply	Corsair HX850w Platinum Series
Mouse	Logitech G604s
Keyboard	Corsair K70 Rapidfire
Software	Windows 11 x64 Professional
Benchmark Scores	Firestrike - 23520 Heaven - 3670

System Name	TheBruise
Processor	i7-960
Motherboard	Gigabyte x58A -Ud5
Cooling	Vantage ALC push pull/2x180mm fans/1x120mm silverstone
Memory	12GB Corsair Vengeance 1600Mhz
Video Card(s)	2 Sapphire Vapor-X 5870's in Xfire
Storage	Ocz Vertex 3 Max Iops (OS) 300GB Velociraptor, 750 GB WD Black
Display(s)	Asus 23" VS238H-P
Case	Silverstone Ft01-BW Fortress
Audio Device(s)	Creative X-fi Titanium
Power Supply	Corsair HX-850
Software	W7pro SP1

Thermal Paste - Q6600 Overclocking

freebie

2DividedbyZero

New Member

Attachments

freebie

mlee49

CrAsHnBuRnXp

stevednmc

ctrain

New Member

newtekie1

Semi-Retired Folder

erocker

*

neoreif

Peter1986C

freebie

95Viper

Super Moderator

Peter1986C

freebie

Brilford Wimley

New Member

Bo$$

Lab Extraordinaire

Bjorn_Of_Iceland

Bo$$

Lab Extraordinaire

freebie

freebie

overclocking101

ctrain

New Member

95Viper

Super Moderator

freebie

Processor	Intel Core i7 10850K@5.2GHz
Motherboard	AsRock Z470 Taichi
Cooling	Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory	32GB DDR4-3600
Video Card(s)	RTX 2070 Super
Storage	500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s)	Acer Nitro VG280K 4K 28"
Case	Fractal Design Define S
Audio Device(s)	Onboard is good enough for me
Power Supply	eVGA SuperNOVA 1000w G3
Software	Windows 10 Pro x64

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASUS TUF x670e
Cooling	EK AIO 360. Phantek T30 fans.
Memory	32GB G.Skill 6000Mhz
Video Card(s)	Asus RTX 4090
Storage	WD m.2
Display(s)	LG C2 Evo OLED 42"
Case	Lian Li PC 011 Dynamic Evo
Audio Device(s)	Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply	FSP Hydro Ti PRO 1000W
Mouse	Razer Basilisk V3 Pro
Keyboard	Tester84
Software	Windows 11

System Name	SynChron
Processor	Intel Core i7 3820
Motherboard	ASROCK X79 Extreme 9
Cooling	CoolerMaster Hyper 212X with 2 Noctua NF-F12 fans in push/pull
Memory	4x2gb Corsair Vengeance LP 1600 CL9
Video Card(s)	Asus GTX 770 DCu2
Storage	Samsung 830 128gb SSD, 1TB Western Digital Velociraptor, Seagate Barracuda 320gb 7200rpm SATAIII
Display(s)	HP x2301 LED
Case	Corsair Obsidian 750d
Audio Device(s)	Asus Xonar Essence STX
Power Supply	Seasonic X - 660Watt Gold
Software	Windows 7 Home Premium 64-bit

System Name	desktop \| Odroid N2+ \|
Processor	AMD Ryzen 5 3600 \| Amlogic S922X \|
Motherboard	Gigabyte B550M DS3H \|Odroid N2+ \|
Cooling	Inter-Tech Argus SU-200, 3x Arctic P12 case fans \| stock heatsink + fan \|
Memory	Gskill Aegis DDR4 32GB \| 4 GB DDR4 \|
Video Card(s)	Sapphire Pulse RX 6600 (8GB) \| Arm Mali G52 \|
Storage	SK Hynix SSD 240GB, Samsung 840 EVO 250 GB, Toshiba DT01ACA100 1T \| Samsung 850 Evo 500GB \|
Display(s)	AOC G2260VWQ6 \| LG 24MT57D \|
Case	Asus Prime 201 \| Stock case (black version) \|
Audio Device(s)	integrated
Power Supply	BeQuiet! Pure Power 11 400W \| 12v barrel jack \|
Mouse	Logitech G500 \|Steelseries Rival 300
Keyboard	Qpad MK-50 (Cherry MX brown)\| Blaze Keyboard
Software	Windows 10, Various Linux distros \| Gentoo Linux

System Name	The Wimley Special
Processor	C2D E8400
Motherboard	GIGABYTE GA-EP45-UD3P
Memory	4gb DDR2 800
Video Card(s)	1gb 5870
Storage	WD Caviar Black 640gb
Display(s)	Samsung XL2370
Case	Antec Something or Other :P
Power Supply	Corsair TX650
Software	Vista 64 bit
Benchmark Scores	SuperPi 1M 11.08 seconds

System Name	Desktop \| Server
Processor	Intel i7 2700k @ 4.6GHZ \| AMD 5350 @ 2500MHZ
Motherboard	Asus P7Z77-V Pro \| Asus AM1I-A
Cooling	Corsair H60v2 \| Stock Air
Memory	Crucial Ballistix 2x8GB CL8 1600MHZ \| Corsair Vengence 2x4GB CL9 1600MHZ
Video Card(s)	EVGA GTX 1060 6GB \| PNY GTX 750Ti
Storage	Samsung 840 EVO 250GB + 4TB WD Red \| 2x Seagate Barracuda 2TB
Display(s)	Samsung S27D390H + Asus VE276Q \| Headless
Case	Fractal Design R5 \| CM Elite 110
Audio Device(s)	Asus Xonar D1 w/Otone Stilo 5.1 and Creative Fatal1ty headset
Power Supply	EVGA Supernova 850 G2\| Corsair CX430M
Mouse	Razer Imperator 2012
Keyboard	Corsair K90
Software	Windows 7 SP1 X64 \| Ubuntu 16.04LTS

System Name	Thakk
Processor	i7 6700k @ 4.5Ghz
Motherboard	Gigabyte G1 Z170N ITX
Cooling	H55 AIO
Memory	32GB DDR4 3100 c16
Video Card(s)	Zotac RTX3080 Trinity
Storage	Corsair Force GT 120GB SSD / Intel 250GB SSD / Samsung Pro 512 SSD / 3TB Seagate SV32
Display(s)	Acer Predator X34 100hz IPS Gsync / HTC Vive
Case	QBX
Audio Device(s)	Realtek ALC1150 > Creative Gigaworks T40 > AKG Q701
Power Supply	Corsair SF600
Mouse	Logitech G900
Keyboard	Ducky Shine TKL MX Blue + Vortex PBT Doubleshots
Software	Windows 10 64bit
Benchmark Scores	http://www.3dmark.com/fs/12108888

System Name	The wifes worst enemy
Processor	i5-9600k
Motherboard	Asrock z390 phantom gaming 4
Cooling	water
Memory	16gb G.skill ripjaw DDR4 2400 4X4GB 15-15-15-35-2T
Video Card(s)	Asrock 5600xt phantom gaming 6gb 14gb/s
Storage	crucial M500 120GB SSD, Pny 256GB SSD, seagate 750GB, seagate 2TB HDD, WD blue 1TB 2.5" HDD
Display(s)	27 inch samsung @ 1080p but capable of much more ;)
Case	Corsair AIR 540 Cube Mid tower
Audio Device(s)	onboard
Power Supply	EVGA GQ1000W MODULAR
Mouse	generic for now
Keyboard	generic for now
Software	gotta love steam, origin etc etc
Benchmark Scores	http://hwbot.org/user/philbrown_23/