Ronarch
New Member
- Joined
- Oct 23, 2011
- Messages
- 30 (0.01/day)
Processor | Intel i5 2500K 3.3Ghz |
---|---|
Motherboard | Asrock Z68 Pro-3 |
Cooling | CM Hyper 212 Evo + 1 extra CM fan |
Memory | Corsair Vengeance CML8GX3M2A1600C9W DDR3 1600 8G Kit |
Video Card(s) | ASUS DI-EN560DT GTX560 Ti Direct CII TOP |
Storage | WD 500 GB / SG 250 GB , not sure wt other spec is |
Case | Coolmaster something |
Power Supply | Antec 550W |
Can someone please show me how to set the fan speed of Hyper 212 Evo higher than 12xx RPM?
In UEFI I set the target CPU temp as 45c and target fan speed as the highest level (lv9).
However, even the CPU temp I observe in HWmonitor reaches almost 70c, the "SYSFANIN" value (I think it's the CPU fan, right?) is still around 1200 RPM.
I tried using Speedfan, but all three speeds setting are already 100%, therefore I cannot increase anymore.
Is it weird that it shows 1200 RPM for "Sys Fan", but 0 RPM for "CPU fan" in Speedfan?
Of course I am sure the fan of the cooler is working.
Nevertheless, the CPU fan speed I see in UEFI page can reach 17xx RPM...
But it just never go that high in the OS... Any suggestion please?
In UEFI I set the target CPU temp as 45c and target fan speed as the highest level (lv9).
However, even the CPU temp I observe in HWmonitor reaches almost 70c, the "SYSFANIN" value (I think it's the CPU fan, right?) is still around 1200 RPM.
I tried using Speedfan, but all three speeds setting are already 100%, therefore I cannot increase anymore.
Is it weird that it shows 1200 RPM for "Sys Fan", but 0 RPM for "CPU fan" in Speedfan?
Of course I am sure the fan of the cooler is working.
Nevertheless, the CPU fan speed I see in UEFI page can reach 17xx RPM...
But it just never go that high in the OS... Any suggestion please?