• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Black Screen after minor overclocking

Zaspera

New Member
Joined
Jan 5, 2011
Messages
500 (0.10/day)
Location
Mapleville, RI
System Name HAF Gamer
Processor Phenom II x4 965 Black Edition
Motherboard Asrock 970 Extreme3
Cooling CM Hyper 212 EVO
Memory 8GB Crucial Ballistix 1600mhz (2x4GB)
Video Card(s) PNY GTX 680 1006MHz
Storage Samsung Spinpoint F3 1TB 7200RPM 3GB/s
Display(s) 22" LG EW224T LED
Case Cooler Master HAF 922
Audio Device(s) Onboard (for now)
Power Supply OCZ ModXStream Pro 600W
Software Windows 7 Ultimate 64-bit
I am using a Asrock 970 extreme3 with a 965BE. It was working just fine. I just edited the CPU to 217mhz x 17 (3.7GHz or so) and changed my RAM to 1600mhz (was running at 1300 according to bios). I went to exit and save changes and nothing happened. it started loading windows then my monitor light was flashing and nothing showed on the screen. Is there a way to reset the bios or something?
 
Joined
Apr 8, 2008
Messages
1,034 (0.18/day)
Location
Scotland
Processor Phenom II X4 B50 @ 3.4Ghz
Motherboard Gigabyte GA MA790XT-UD4P
Cooling Vendetta 2, several case fans
Memory 8GB Geil Ripjaws 1666Mhz
Video Card(s) Powercolor 5850 1GB
Storage 1TB Samsung F1
Display(s) LG 23" W2361V TFT Widescreen
Case Antec 300
Audio Device(s) X-Fi Xtreme Music
Power Supply Antec HCG 750W
Software Windows 7 Pro 64bit
If your motherboard doens't have a CMOS reset switch you can just take out the cmos battery (small circular battery on the motherboard) for about 5-10 mins and it will reset everything.
 

manofthem

WCG-TPU Team All-Star!
Joined
Jan 9, 2011
Messages
10,960 (2.26/day)
Location
Florida
Processor 3900X @ 4.0
Motherboard Asus ROG Strix X570-E
Cooling DeepCool Castle 360EX
Memory G Skill Trident Z Neo 32GB 3600
Video Card(s) RX 5700 XT Pulse
Storage Sabrent Rocket Q 1TB
Display(s) LG 34UC88
Case Thermaltake P3
Power Supply Super Flower Leadex III 750w
Mouse Logitech G900
Keyboard G Skill KM570 MX Silver
Software Windows 10 Pro
Can't you just go back into the BIOS and change the values back, or can you not get into the BIOS?
 

Zaspera

New Member
Joined
Jan 5, 2011
Messages
500 (0.10/day)
Location
Mapleville, RI
System Name HAF Gamer
Processor Phenom II x4 965 Black Edition
Motherboard Asrock 970 Extreme3
Cooling CM Hyper 212 EVO
Memory 8GB Crucial Ballistix 1600mhz (2x4GB)
Video Card(s) PNY GTX 680 1006MHz
Storage Samsung Spinpoint F3 1TB 7200RPM 3GB/s
Display(s) 22" LG EW224T LED
Case Cooler Master HAF 922
Audio Device(s) Onboard (for now)
Power Supply OCZ ModXStream Pro 600W
Software Windows 7 Ultimate 64-bit
It was literally a black screen. I just put the battery back in and can get into the bios again. It says my RAM frequency is now 872. WTF does that mean?
 

95Viper

Super Moderator
Staff member
Joined
Oct 12, 2008
Messages
12,679 (2.23/day)
The manual has all kinds of info.
970 Extreme3

clear.pngmb.png

EDIT:

It says my RAM frequency is now 872.

It is running at 872 * 2 = 1744MHz

You may need to manually set it; if, the board is not reading the info on the sticks correctly.
 

Zaspera

New Member
Joined
Jan 5, 2011
Messages
500 (0.10/day)
Location
Mapleville, RI
System Name HAF Gamer
Processor Phenom II x4 965 Black Edition
Motherboard Asrock 970 Extreme3
Cooling CM Hyper 212 EVO
Memory 8GB Crucial Ballistix 1600mhz (2x4GB)
Video Card(s) PNY GTX 680 1006MHz
Storage Samsung Spinpoint F3 1TB 7200RPM 3GB/s
Display(s) 22" LG EW224T LED
Case Cooler Master HAF 922
Audio Device(s) Onboard (for now)
Power Supply OCZ ModXStream Pro 600W
Software Windows 7 Ultimate 64-bit
It seems that when I changed my CPU Freq, my RAM was adjusted as well. I changed my CPU from 200mhz x 17 to 215mhz x 17. Is there a way to just change the CPU and leave the RAM alone? On my old i7, I never had this problem.
 

95Viper

Super Moderator
Staff member
Joined
Oct 12, 2008
Messages
12,679 (2.23/day)
You should have an option to un-link them or manually set your DRAM frequency.
 
Last edited:
Top