• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

ATITool 0.26 Artifact Detection on G71 cores

fourth

New Member
Joined
Feb 19, 2007
Messages
5 (0.00/day)
When testing for highest core clock on G71 cores, tested on a:

XFX 7900GS Extreme Edition w/ stock memory
XFX 7950GT Extreme Edition w/ stock memory

The scanning for artifacts does not detect numerous artifacts that are clearly visible to the human eye and repeat multiple times. Also tested with highest detection algorithm(lowest overclock)slider setting. Still seeing clearly visible artifacts but ATITool does not detect them, but continues to increase clock speeds. I aborted the find max approx. 15 mhz beyond when I started seeing these artifacts.
 
Joined
Feb 21, 2007
Messages
5 (0.00/day)
i have the same problem - 7900GS and i clearly see artefacts but ati tool continues to riase up the mem clock.
may be it is releated to my os - win2003 x64 and 93.71 official drivers from nvidia
 
Last edited:

WarEagleAU

Bird of Prey
Joined
Jul 9, 2006
Messages
10,812 (1.67/day)
Location
Gurley, AL
System Name Pandemic 2020
Processor AMD Ryzen 5 "Gen 2" 2600X
Motherboard AsRock X470 Killer Promontory
Cooling CoolerMaster 240 RGB Master Cooler (Newegg Eggxpert)
Memory 32 GB Geil EVO Portenza DDR4 3200 MHz
Video Card(s) ASUS Radeon RX 580 DirectX 12 DUAL-RX580-O8G 8GB 256-Bit GDDR5 HDCP Ready CrossFireX Support Video C
Storage WD 250 M.2, Corsair P500 M.2, OCZ Trion 500, WD Black 1TB, Assorted others.
Display(s) ASUS MG24UQ Gaming Monitor - 23.6" 4K UHD (3840x2160) , IPS, Adaptive Sync, DisplayWidget
Case Fractal Define R6 C
Audio Device(s) Realtek 5.1 Onboard
Power Supply Corsair RMX 850 Platinum PSU (Newegg Eggxpert)
Mouse Razer Death Adder
Keyboard Corsair K95 Mechanical & Corsair K65 Wired, Wireless, Bluetooth)
Software Windows 10 Pro x64
I seen those too, but on my card which isnt an nvidia one. It would see defects and what not. Id put it down, then move it slowly and it wouldnt see them. Then, after 5 mins of burning in, it sees the yellows ones but keeps going. Weird.
 
Joined
Feb 21, 2007
Messages
5 (0.00/day)
i testet older versions of ati tool
so far:
0.26 and 0.25.beta15 does NOT detect artifacts properly
0.25.beta10 and 0.25.beta14 detect artifacts properly, but displaying wrong mem clock (real divided by two ... for example my real is 900mhz (1800ddr) ati tool shows it as 450mhz, but that is not a big problem :)))

so now i am using 0.25.beta14 and i am satisfied...
to be sure that clocks are ok i am using rivatuner 2.0 for setting and measuring it
 
Top