- Joined
- Mar 19, 2012
- Messages
- 377 (0.09/day)
- Location
- Rizal, Philippines
| System Name | Poor Man's Build |
|---|---|
| Processor | Intel i7 3960X 4.9Ghz Sandy Bridge E |
| Motherboard | MSi X79A-GD65 8D |
| Cooling | XSPC 240mm and 360MM (External) Rad |
| Memory | 64Gb Corsair Dominator Platinum |
| Video Card(s) | EVGA GTX770 SC ACX SLI (non water cooled yet) |
| Storage | Intel 520 240GB SSD x2 /x2 WD Caviar Black 3TB 7200RPM 64MB Cache |
| Display(s) | ASUS 27" 2560X1440 x3 |
| Case | Corsair 900D (upgraded from my lvl 10 gt and 600T) |
| Audio Device(s) | Asus Xonar Essence STX |
| Power Supply | Corsair AX1200i 80PLUS Platinum |
| Software | Windows 7 Ultimate (FPP) |
hey guys I was testing out making a bootable usb drive using my 1tb imation external HDD. then somewhere on the net I saw something about formatting or partition using cmd. and so I did that and somewhere it's at 2% complete (formatting I think) I had a brownout and after 2 hours the electricity went up, the external hdd is unreadable anymore, on any of my usb slots it's not showing in my computer, anyone here got any fix for me? I'll try to find that guide on the net for reference about the cmd stuff.
its this one.
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(may take a couple minutes, depending on the USB drive size)
ASSIGN
EXIT
its this one.
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(may take a couple minutes, depending on the USB drive size)
ASSIGN
EXIT
