- Joined
- Oct 21, 2005
- Messages
- 6,880 (1.02/day)
- Location
- USA
System Name | Computer of Theseus |
---|---|
Processor | Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset) |
Motherboard | EVGA Z690 Classified |
Cooling | Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active |
Memory | G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK |
Video Card(s) | EVGA Geforce 3060 XC Black Gaming 12GB |
Storage | 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT |
Display(s) | Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms. |
Case | Lian Li O11 Air Mini |
Audio Device(s) | Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer |
Power Supply | Super Flower Leadex Platinum SE 1000W 80+ Platinum White |
Mouse | Zowie EC3-C |
Keyboard | Vortex Multix 87 Winter TKL (Gateron G Pro Yellow) |
Software | Win 10 LTSC 21H2 |
I am running an Asetek / H50 with downfiring exhaust fan setup. The fan is a Koolance 120mmx25mm dual ball bearing. These are the fan specs:
SKU: FAN-12025HBK
Dimensions: 120x120x25mm
Type: Dual Ball-Bearing
Connector: 3-pin (3-wire with tachometer)
Rated Voltage: 12VDC
Current: 0.28A
Speed: 2600RPM (max)
Static Pressure: 5.4mm-H2O
Airflow: 107.6CFM (max)
Noise: 32.80dBA (max)
Should I place a 25mm shroud between the fan and the radiator?
SKU: FAN-12025HBK
Dimensions: 120x120x25mm
Type: Dual Ball-Bearing
Connector: 3-pin (3-wire with tachometer)
Rated Voltage: 12VDC
Current: 0.28A
Speed: 2600RPM (max)
Static Pressure: 5.4mm-H2O
Airflow: 107.6CFM (max)
Noise: 32.80dBA (max)
Should I place a 25mm shroud between the fan and the radiator?