Hi
Welcome to TPU
I don't have original one as it was brought to me in state of agony. When i put Thaiti one - driver loads, but it isn't working
Why would you do that! That vga card uses the Pitcairn GPU
When i put one from Pitcairn - Basic Display Driver is loaded and atiwinflash doesn't even try to detect it. Does anybody have any suggestions resurrecting that gpu?
Create a bootable flash drive
go here
http://files.extremeoverclocking.com/browse.php?c=21
Download - HP USB Disk Storage Format Tool - v2.1.8 & Windows 98 System Files
click Primary Download unzip the files to a folder on your HDD; make sure your USB Memory stick is attached to your PC; open HP USB Disk
Storage Format Tool v2.1.8 ; select Creat a DOS startup disk/ select: using DOS system files located at: (these are the files you have just downloaded): browse to the files in win98boot; then start the process.
Download latest version of ATIFlash
here -
http://www.techpowerup.com/downloads...sh%203.99.html
Set the motherboard bios to boot from usb *press F8 during boot; select from boot menu if option is avalable; this should boot to a win98 dos prompt
Type at the dos prompt - dir to veiw the content of the flash drive
Type at the dos prompt; atiflash -ai 1 [see if adapter is at this address and is recognised]
[Note: when booting from onboard vga / igp also = primary position 0]
Information required
-Upload a screenshot or any error information at position 0/1
-Hash # numbers from the back of the card [serial number NOT REQUIRED]
-Motherboard Make and Model, that the vga card is being used/tested in
atb (all the best)
Law-II