Monster ITX open air case- Bellardo Brutal

[ST.o.CH]

Greetings,

Last time I left the front behind because I was improve it, and so turns out more like my avatar, for now the middle section in stainless steel mesh and the usb 3.0 eyes.

At the same post the instrumental panel, aka Asus ROG front panel, didn´t test yet, only saw the box pictures.

The pictures on below.

Still some issues to solve, but nothing special, almost there.

Thank you for your support and have a nice day.

Cheers.

 

[ST.o.CH]

Greetings everyone, there´s been a while since last post.

Since last time I went to Saudi Arabia to work and now I´m back in vacations.

Sometimes life is a mystery and turns out to unexpected.

And now, after almost half an year comes one update.

Today I bring the Cooler Master gear for the Bellardo.

My many thanks to Sofia Mota and Cooler Master Portugal.
The pack.

Cooler Master V750, a small atx psu with gold certification and full modular.
Comes with all flat design cables and unique style.

One of the world´s best thermal compound.

The coolers, V8 GTS from Cooler Master will do for the heads of the V4 engine, You´ll get the idea.
As well they are pretty awesome for modding without losing cooling performance.

Last photo shows the right V8 prepared to embrace the gpu.

"That´s all folks" said the Bug(s) Bunny.
My apologies for the time gap I say.

Have a nice day.
BTW is good to be back.

 

[mad_mic3]

Good to see some good old old skool modding happening
if its ok with you, ill add a link over on ocau

 

[ST.o.CH]

Good to see some good old old skool modding happening
if its ok with you, ill add a link over on ocau

First of all welcome to techpowerup forum mad_mic3,
That´s all ok.
Thanks for let me know.

 

[CAPSLOCKSTUCK]

Why the hell wasnt i told about this build?.......

Ticks all the boxes for me......proper craftsmans skills, computers and bikes. A match made in heaven. I genuinely cant wait for the next update.........(wake me up if im sleeping please.)

 

[uuuaaaaaa]

Parabéns pelo trabalho que fizeste até agora, muito bom! (Sorry guys, but I'm congratulating a fellow Portuguese in our language, hope that you don't mind!)

 

[xvi]

I'm congratulating a fellow Portuguese in our language

It's a pretty amazing build.

 

[ST.o.CH]

Why the hell wasnt i told about this build?.......

Ticks all the boxes for me......proper craftsmans skills, computers and bikes. A match made in heaven. I genuinely cant wait for the next update.........(wake me up if im sleeping please.)

Thanks @CAPSLOCKSTUCK , you're welcome.

Parabéns pelo trabalho que fizeste até agora, muito bom! (Sorry guys, but I'm congratulating a fellow Portuguese in our language, hope that you don't mind!)

Obrigado @uuuaaaaaa, não sabia que eras português, ainda mais para vir até porque este projecto está longe de terminar.
Thanks @uuuaaaaaa, didn't know you are from Portugal, there is more to come and by the way lots to do until finish this project.

It's a pretty amazing build.

Thanks @xvi.

By second, one small update to finish this post.

The V8 had received rgb lights instead of red,
Shall we see one Cooler Master V8 GTS in purple's original brand color,...
and others too.
First step.

Changed, and first look.

Mounted in proper place.

Cooler Master official color, ( I know, I have a bag with it).

Thank you all for your support, and remember this:
Have a nice day,
All days are days, one at the time.

 

[ST.o.CH]

Greetings,

Small update with the Cooler Master V8 GTS, "the gpu cooler".

From last time the V8 reach rgb state and now, one of them goes to gpu.

The covers are made in 4mm aluminium thick.

That´s all for the moment.

Thanks for reading.

Cheers.

 

[Vayra86]

Greetings,

Small update with the Cooler Master V8 GTS, "the gpu cooler".

From last time the V8 reach rgb state and now, one of them goes to gpu.

The covers are made in 4mm aluminium thick.

That´s all for the moment.

Thanks for reading.

Cheers.

How are you going to get air across the board? VRM, memory etc

 

[ST.o.CH]

How are you going to get air across the board? VRM, memory etc

I did not think about it yet, maybe I may get a solution in time,
However ( possibly) I also maybe use the aluminium plates and some copper behind it.

 

[ST.o.CH]

Hi guys,

Here goes one update.

This time I started the calibration of the bike, introduced also the graphics on place, a support for it, first part of lower grill.
Made partial assembly, and of course the paint did not went well ( ?again?).
Pictures on below.
On the front I replace the center stainless steel for regular mesh steel.

Drag bike style, ... no, missing the parachute...

New cover for ROG front panel.

V8 GTS.

Still lots of work to do, but slowly is taking shape.
Until then and have a nice day.

PS: Thank you for your support.

 

[uuuaaaaaa]

Hi guys,

Here goes one update.

This time I started the calibration of the bike, introduced also the graphics on place, a support for it, first part of lower grill.
Made partial assembly, and of course the paint did not went well ( ?again?).
Pictures on below.
On the front I replace the center stainless steel for regular mesh steel.

Drag bike style, ... no, missing the parachute...

New cover for ROG front panel.

V8 GTS.

Still lots of work to do, but slowly is taking shape.
Until then and have a nice day.

PS: Thank you for your support.

This is looking insane!!!

 

[mad_mic3]

It's Looking sick as
What trouble are you having with the paint?

 

[ST.o.CH]

This is looking insane!!!

Thanks @uuuaaaaaa.

It's Looking sick as
What trouble are you having with the paint?

I did used the synthetic thinner instead of nitrocelulosic diluent and making it in Winter is not a clever idea, however I must continue with synthetic to avoid ink problems.

 

[mad_mic3]

arh, yep that will do it

 

[ST.o.CH]

Greetings,

Here comes an update with the buttons, usb 3.0 and more.

Ongoing the work in front this time I managed to fill the holes with polyester resin and fix the elements in right position. The usb side was going odd and I made two aluminium pieces to cover the excess.
The following pictures on below.

Thanks for reading, and despite this project taking to long I´m still learning how to make some details/parts.

Have a nice day.

 

[ST.o.CH]

Greetings fellas,

Happy Holidays and a brave new world of 2017.

Update with the engine system.

This time I bring the two Cooler Master V8 GTS in place, one Seidon 120V rad chopped from 120mm to 85mm high, as well space for two 60mm fans.
The graphics has now an improved liquid bloc to memory and vrm.
Made the holes for cable management and it´s pretty much this.
The following pictures.

That´s all for now,
Thanks for reading and have a brave new world.

 

[stinger608]

This is just getting amazing!!!!!!

 

[ST.o.CH]

This is just getting amazing!!!!!!

Thanks for stopping by bro.

 

[ST.o.CH]

Greetings.

Update with rgb vandal switch.

Today I bring the first ever rgb vandal switch, and mean rgb to match the entire project color in one at the time. At this time are made switches in tricolors, blue, red and green.

For a while I was looking for a solution and finally managed to achievement.

This were the steps I took,
The first option is the best, but takes too much time for iron welding as show in third attempt,
In the second I removed the two leds and put wires instead, was going good until the test reveals I lost both red and green colors.
Well the third attempt I didn´t finish because was getting difficult the welding after remove the white layer.
The fourth is only to show the missing weld points will get malfunction of the led strip.
The fifth is the good one that allowed me the completion of this feature.
And below is the Elewind PM 221 disassembled.

Reading for rgb.

The failures that lead to success.

Upgraded, Appearance intact.

Democracy!

That´s all for now, next time will be more.

Have a brave new year, all the way long.

.

 

[ST.o.CH]

Greetings folks,

Update with assembling, rgb test, sleeving with paracord 550, ect.

The two former weeks allowed me to push "almost" to finish line of the Bellardo ZMR 500V4.
Solved the ink issue by hand paint with brush, better conditions for me and less time to complete the process, around 24 hours between each lair.
The assembling process in a pain, luckily I have a special box that help keep thoughts on proper place.
The following pictures.
Enter the main bios.

Engine.
Make some impact.

BTW was mean to be a wheel instead a box?

Avatar.

Lights.

Almost there.

That´s all at the moment, more later.

Thanks for stopping by .

 

[TheoneandonlyMrK]

truly a feast for the eyeballs great build and great build thread

 

[ST.o.CH]

truly a feast for the eyeballs great build and great build thread

Thanks bro, appreciated.

 

[verycharbroiled]

this is one of the best builds ive ever seen.

cant wait for the final result!