WaterBlock fitting Question

[FireFox]

Hi Lads.

can someone tell me what is the name of that fitting/adapter

Thanks.

 

[sneekypeet]

They look like pretty standard compression fittings, at least in the second image. The top image almost looks like the base fitting is much larger diameter than the screw on cap.

Are you looking for fittings with the metal extension bits?

 

[T-Bob]

Are you referring to the Bulkhead Fittings? The fittings that allow you to pass through the aluminum plate?

 

[sneekypeet]

Are you referring to the Bulkhead Fittings? The fittings that allow you to pass through the aluminum plate?

Brilliant, now I see what is going on! That is likely what he is looking for.
These? http://www.frozencpu.com/products/6...er_BP-WTP-C04.html?tl=g30c101s460&id=g5fTSm5d

 

[T-Bob]

Brilliant, now I see what is going on! That is likely what he is looking for.
These? http://www.frozencpu.com/products/6...er_BP-WTP-C04.html?tl=g30c101s460&id=g5fTSm5d

Yes sir, I believe that is what he wants

 

[FireFox]

OMG

Sorry guys i never got any notification from your replies

Are you referring to the Bulkhead Fittings? The fittings that allow you to pass through the aluminum plate?

Brilliant, now I see what is going on! That is likely what he is looking for.
These? http://www.frozencpu.com/products/6...er_BP-WTP-C04.html?tl=g30c101s460&id=g5fTSm5d

Exactly that's what i was looking for.

Are you looking for fittings with the metal extension bits?

Now that you mentioned it i would need that too.

Ideas?

 

[sneekypeet]

Now that you mentioned it i would need that too.

Ideas?

I was looking on Bitspower the other day as it seems that is the logo on them in the image. The best I could come up with was the Aqua Pipe II. But looking again now, they appear to be the quick disconnects (male and female ends together). http://www.frozencpu.com/cat/l3/g30...onnects-Bitpsower_Quick_Disconnect-Page1.html

 

[FireFox]

The best I could come up with was the Aqua Pipe II. But looking again now, they appear to be the quick disconnects (male and female ends together).

I appreciate your help.

Btw i will use this instead:

Brilliant, now I see what is going on! That is likely what he is looking for.
These? http://www.frozencpu.com/products/6...er_BP-WTP-C04.html?tl=g30c101s460&id=g5fTSm5d

Are these the same:

 

[sneekypeet]

I appreciate your help.

Btw i will use this instead:


View attachment 84402





Are these the same:

View attachment 84403 View attachment 84404 View attachment 84405

Looks like it. The only difference I see is that the ones I linked did not seem to have an o-ring.

 

[thesmokingman]

What are you going thru? The bulkhead/coupler above is for going thru thin plate like a case wall.

 

[FireFox]

The bulkhead/coupler above is for going thru thin plate like a case wall.

Exactly.

I want them to place it here:

From the outside of the case to the inside.

I need to fix that mess, i don't like at all how it looks

 

[thesmokingman]

In that case when you do it, you can put the ports anywhere like the one for the cpu at the top and the other at the bottom. Do it in a way to suit your loop order, etc. Also, look at using a step drill bit, will save you time .

 

[FireFox]

step drill bit

 

[sneekypeet]

Something like this.

If you plan to relocate where the tubing passes through the chassis that is.

 

[thesmokingman]

^^Yep that. Use tape to mark the size you want on the bit. You cannot use a coupler in the premade holes since the coupler is smaller than the premade holes. They'll float in space, etc.

 

[FireFox]

^^Yep that. Use tape to mark the size you want on the bit. You cannot use a coupler in the premade holes since the coupler is smaller than the premade holes. They'll float in space, etc.

I am confused.

What you are trying to tell me is that i need to make new holes in the case?

 

[sneekypeet]

I am confused.

What you are trying to tell me is that i need to make new holes in the case?

He is correct! The holes you have are made large to allow tubing to flex and pass through easily. I would assume washers might help, but the thickness of them may come into play. As he stated, the fittings are smaller in diameter, and would sit sloppy in the stock holes.

 

[FireFox]

He is correct! The holes you have are made large to allow tubing to flex and pass through easily. I would assume washers might help, but the thickness of them may come into play. As he stated, the fittings are smaller in diameter, and would sit sloppy in the stock holes.

It doesn't sounds good, making new holes to my case

 

[sneekypeet]

It doesn't sounds good, making new holes to my case

Try to find some large diameter, but thin washers. Just be sure the ID of the washer and the OD of the fittings matches to save work. Paint them black, problem solved

 

[FireFox]

Try to find some large diameter, but thin washers. Just be sure the ID of the washer and the OD of the fittings matches to save work. Paint them black, problem solved

As you suggested, i will buy washers and paint it, i will bring the fittings with me when buying the washers.

You're a Genius

 

[sneekypeet]

You're a Genius

No, well at least I have never been tested for it
I am just really good at thinking of affordable solutions to life's minor setbacks. In other words I'm just handy when it comes to rigging things.

 

[FireFox]

No, well at least I have never been tested for it
I am just really good at thinking of affordable solutions to life's minor setbacks.

Such idea wouldn't come into my head so easily, sometimes i am dumb i had thought that those fittings were made with the definite purpose to fill those holes.

In other words I'm just handy when it comes to rigging things.

Btw, the fittings should be delivered in one week, i didn't find it in my Country and i have ordered it on Ebay UK.