The latest project - laptop cooled by water

[RAF-MODS]

I improved today the lacquered elements:

And it looks like this:

 

[RAF-MODS]

The look of the laptop has changed a bit The elements have to be sanded and varnished. They are glued to two-sided tape in only three places for easy removal.

 

[RAF-MODS]

 

[RAF-MODS]

improved cooling - it bounces properly as it should, and the pressure is increased - the bolts were removed, their seats rested against the distance on the plate, so here they were sanded and the bolts themselves under the springs got the pads: D - miodzio.

Cooling took a bit from the burner - so the bottom has to be polished now - especially the parts under the cpu cores and gpu.

 

[RAF-MODS]

first applied liquid metal xD i did not know it would be so hard

no cep already glued - waiting for tomorrow: D. How something went wrong will be the fix at most xD

 

[RAF-MODS]

Today's work with my sister started with polishing CPU / GPU cooling.

The move went to the toothpaste and polishing tips - the whole went out great, you can see the delicate effect of the mirror.

I did not want to waste the "teddy bear" on trial tests - so on the CPU and GPU went past the Alphacool paste.

CPU load after 5 min 100% (UV CPU -130mv) 65 Degrees MAX! - the temperature is obtained without the use of the LC stand 4GHz, you can still OC

The pump also got a braid

 

[RAF-MODS]

I would like 4.5 ghz (it is possible because I checked without the LC snapshot but it shows that the CPU gets too little PAPU - will need to raise the W limit and reduce the UV procka - because after 1min cpu decreases the clock to 4,5 Ghz, and again 3.9 Ghz) as soon as the starter is complete (I am waiting for Temp sensors and other duperele) then I am putting on CPU and GPU - then we will catastrophe: D

I increased W and decreased the UV (- 40 do not know if you can more) moment and 70 degree pair: D with LC will be better: D (did not jump Power throttling so is cool ) - because I was afraid the power supply may be too weak.

 

[RAF-MODS]

came pack from Alphacool and Phobya.

I took off the cooling - I corrected a little February using the end of the tin I had. The two-component thermo-conductive adhesive on it did not equate - I know that there is no conductivity of the tin, but some of it has more to smooth out the surface curves so it's visually better to apply black matte paint.

There are also thermocouples, RGB controller, pastes and sensors. So you can fold the cooling rack to the end. Today is my birthday so I had other things to do than a long time digging for the project - I'll try to catch up

 

[RAF-MODS]

witam !

Cooling painted, dries

Sensor stand ready and waiting for flood!

We assume a moment to cool down and ...

still today

be cautious!

 

[RAF-MODS]

It's hard to breathe the system - like last time

Well, nothing for longer tests do not have time: P bubbles fly and fly. Starting fluid temperature - 27 degrees - at the end of the test - 35. How not to look at the benchmark, so it will not play - and the laptop turns on the fans only for the first run. Later I will see the pace of the game - more important to me!

 

[RAF-MODS]

one round of wot - laptop does not even turn on the xD fans (gpu fan activates from 50 degrees to cpu from 55 degrees)

 

[RAF-MODS]

They are leds (RGB) is a party!

I seriously sacrificed some time ago. In addition, the reservoir has already taken the assembly threads and stick to the destination.

You need to buy a handle for these wires

 

[Durvelle27]

Dude that looks sick

Not a huge fan of laptops but this really makes me wish i had one unique like it

 

[AleksandarK]

This reaches all the limits of the known universe. AWESOME WORK!!!

I would like to see more mods from you!

 

[RAF-MODS]

thank you very much !
Still a bit and the mod will be finished
Would you like me to finish the same movie at the end:

just with a laptop?

 

[AleksandarK]

Yes, do it.

 

[RAF-MODS]

Leads from leds have been arranged

The ledges on the leds got black rims and waited to cut the matte Plexiglas

Wooden ornamental dies on the die received three layers of paint and are ready for assembly.

 

[RAF-MODS]

I improved slightly down according to one user's guide.

Overlays affixed to the lid of a laptop:

 

[RAF-MODS]

Latest project photos:

There is not much to do - soon to end

 

[RAF-MODS]

Plexi on the sides inserted into silicone.

 

[jboydgolfer]

Latest project photos:

even I have to admit that work is really nice looking. not to mention the Image uploads ALONE are a lot of work

 

[RAF-MODS]

something I clicked on

but not final pics - because ready to go xD must be upright.

I know more or less some pics I want: D

Only the sponsors logo on the matrix has been made

 

[RAF-MODS]

The project is complemented by:

Memory Kingston HyperX DDR4 2400MHz 16GB x 2

SSDs:
1 Drive - WD BLACK2 128GB SSD / 1TB HDD,
2 Drive - Samsung Evo 840 1TB,
3 Drive - Crucial M.2 (Sata) SSD MX300 275GB,
4 Drive - Apacer Z270 M.2 PCIe GEN 3 x 4 240GB

So thanks to the sponsors

tomorrow will put the laptop disks, cut logs and final session already in the wekkend

 

[Sasqui]

Wow!

 

[RAF-MODS]

is the power