Ryzen Owners Zen Garden

[zo0lykas]

?? ;-) https://www.techpowerup.com/237586/amd-ryzen-5-1600-and-1600x-cpus-found-with-8-working-cores

nahhh i loved it

Just need to downgrade

wondering if the 1600 would hold back dual Vega 64s

 

[Durvelle27]

I think dual Vega 64s would hold back dual Vega 64s lol. I want a 56 or 64 so bad (need to replace GTX970). I think a 1600 (and X) will be fine with it. Arguably more compute power than a 7700K via thread count on multi-threaded apps, "fast enough" single threaded... I don't think there'd be a problem.

Under water they should be fine

?? ;-) https://www.techpowerup.com/237586/amd-ryzen-5-1600-and-1600x-cpus-found-with-8-working-cores

Ehhhh I need further proof than task manager

 

[zo0lykas]

Not bad at all ) just jump from
Fx-9370 to 1800x. If we compare synthetic benchmarks 1800x 3x faster, and take less powet, but if we compare in games no different at all

btw i notice when pc is off, from wall socket pc draining 19-20w strange.
With old fx9370 was 1-3w only..

Any ideas?

Good stuff, glad its working at 2933... better than 2400, hey

I think you're probably sorted, your ram should handle 2933 no problem since its lower than its XMP stock. Hope you enjoy your Ryzen more now too

Happy to have helped a bit.

 

[R-T-B]

btw i notice when pc is off, from wall socket pc draining 19-20w strange.
With old fx9370 was 1-3w only..

Any ideas?

Did you change the PSU or any other components during the build? CPU shouldn't matter there.

 

[zo0lykas]

not really.
i change motherboard + rams + cpu + gpu, rest staff like water pump,fans,psu,ssd,dvd same :-/

just wondering, or some one have "watt reader" and notice same think ? on ryzen setup?

Did you change the PSU or any other components during the build? CPU shouldn't matter there.

 

[toilet pepper]

not really.
i change motherboard + rams + cpu + gpu, rest staff like water pump,fans,psu,ssd,dvd same :-/

just wondering, or some one have "watt reader" and notice same think ? on ryzen setup?

New boards wpuld have some new fearures like leds that wont freaking turn off unless you switch the psu off.

 

[PHaS3]

Not bad at all ) just jump from
Fx-9370 to 1800x. If we compare synthetic benchmarks 1800x 3x faster, and take less powet, but if we compare in games no different at all

btw i notice when pc is off, from wall socket pc draining 19-20w strange.
With old fx9370 was 1-3w only..

Any ideas?

New boards wpuld have some new fearures like leds that wont freaking turn off unless you switch the psu off.

LEDs don't use a whole lot of power by themselves, a wall power adapter to power some external ones may use a bit even if they're not on, but not on-board LEDs. Certainly not like 10W, as far as I know.

Are you shutting your PC down completely or just sleeping it? Full shut down should be off, minimal power for PSU like your 9370 was, where sleep will still pull some power. I assume you aren't running your monitor off the same power cable split, too? If your water cooling is custom loop, does it all shut down completely when PC is off still?

Other than those ideas, i got nothing. Could be a faulty reading or just a quirk of the hardware.

 

[R-T-B]

You also could try erp lot 3 (or whatever it is called) enabled in bios, if you have it. Turns off unnecesary things on full shutdown.

 

[zo0lykas]

LEDs don't use a whole lot of power by themselves, a wall power adapter to power some external ones may use a bit even if they're not on, but not on-board LEDs. Certainly not like 10W, as far as I know.

Are you shutting your PC down completely or just sleeping it? Full shut down should be off, minimal power for PSU like your 9370 was, where sleep will still pull some power. I assume you aren't running your monitor off the same power cable split, too? If your water cooling is custom loop, does it all shut down completely when PC is off still?

Other than those ideas, i got nothing. Could be a faulty reading or just a quirk of the hardware.

iam on same opinion about LED's they just cant drain ~19W when they are OFF :-D if they are draining 19W then off how much draining then they are on? if now iam browsing or
watching movies from socket 110-120W.

Yes i make full shut down, never sleep or hibernation sleep. sure i check before all power settings in power plan.

And "Watt Reader" conneted only for PSU cable so that ~19W going fck knows where in board.

You also could try erp lot 3 (or whatever it is called) enabled in bios, if you have it. Turns off unnecesary things on full shutdown.

like what ? not really understand you

 

[Nuckles56]

A lot of motherboards always have power to the USB ports even when the system is fully shut down so that will add to the power draw and when you're drawing 19W from the wall, you are only getting probably 12 or 13W available to the system by the time you have PSU losses

 

[zo0lykas]

yes sure i know what you mean but anyway 19W its far to much, like i said with old FX9370 + motherboard was gigabyte ud7 v1 and i have like you try say usb power, and most time i charge or mouse or phone, was 2-5W when charging.

when system shutted down, drainig 18-19W, when on at moment 107W with ryzen 1800x oc to 4ghz and 1080 oc, + 8 fans + water pump and some RGBBB lol

no sense :-/ for me

A lot of motherboards always have power to the USB ports even when the system is fully shut down so that will add to the power draw and when you're drawing 19W from the wall, you are only getting probably 12 or 13W available to the system by the time you have PSU losses

 

[YautjaLord]

I'm alive! lol Let's make this Zen garden great again. Nah, f*ck it, i had terrible day, entire f*ckin' day, fiddling with what da f*ck is wrong with everything - everything - i did to OC my 1700X. Last tweak looked like this:

CPU freq: 4.0GHz;
CPU voltage: 1.4000v;
DRAM: XMP Profile 1 2400MHz (Ripjaws V, you can see my sys specs);
VDD18: 1.880v;
VDDP: Auto;
SoC Voltz: 1.15v;
The rest either Auto or i forgot, coz my head have gone quite bananaz from all this shit, slightly but still..... lol But hey, atleast i can run P95 - right now - plus type this shit, without this PC dying/BSOD'ing on me all of the sudden. How many F-bomb & profanities i used? Yeah, i had quite a headache, ain't i? lol P95 Blend test, should have mentioned. Also CPU is @ default 3.4GHz clock.

 

[PHaS3]

1.400v a little much, isn't it?

I took delivery of my AM4 retention bracket for my H105 this morning. Tonight's the night I may see how far I can go, but I've been impressed with even the stock performance of my 1700.

 

[R-T-B]

1.400v a little much, isn't it?

The chip can take that no prob with proper cooling, and it's not really for 4GHz.

 

[PHaS3]

I thought 1.40 was a lot for Ryzen, but I see with some proper cooling 1.45 is max. Interesting Most tweaking I've done with CPU clocks and voltages was a minor 3.8 OC on all cores with 1.35v, just to see if it would work (and naturally it did).

The bug has bit now though, when my H105 is on all bets are off

 

[R-T-B]

AMD has pretty much said 1.45 is the "max safe" voltage (technically they are more conservative but admit the "silicon can take it no problem.")

They don't really recommend going too far into the 1.4v territory without good cooling though.

 

[PHaS3]

Hows your 1800X going? Its your second one hey, after your RMA fun time and linux issues?

 

[YautjaLord]

Update. P95 found worker/core #13 stopped working after 1h of Blend test. On default 3.4GHz freq. Dafuk?!!!! lol Even funnier than that is this:

The one below was prior to me fiddling around with frequencies n stuff, the last one was after i reverted back to the same 3.4GHz frequency after all attempts to sort this shit out. Dunno what happened, i'll keep tryin', if any of you have anything to add, like what to tweak & what to leave @ Auto or disable altogether - i'm all ears.

CPU-Z's bench on both 3.4GHz & 4.0GHz - gave awesome numbers, reference CPU for both single & multi thread benches was i7 5960X, 4.0GHz 1700X was 41% better/faster(?) than 5960X; CPU-Z stress test on 4.0GHz failed miserably, as in crashed to the mobo's splash/BIOS screen. lol I'm really interested in reaching these 4.02 gigahertz. Cheers.

 

[the54thvoid]

On my 1700X, on a good air cooler, my max is 3.82Ghz rock solid stable. Memory is at 3200 with 14 timings though. It'd be interesting to see what is better, 4.0Ghz at 2400 mem frequency or 3.8Ghz at 3200 mem frequency

 

[YautjaLord]

On my 1700X, on a good air cooler, my max is 3.82Ghz rock solid stable. Memory is at 3200 with 14 timings though. It'd be interesting to see what is better, 4.0Ghz at 2400 mem frequency or 3.8Ghz at 3200 mem frequency

Should have mentioned, the mobo's (GA-AX370-Gaming-K7) BIOS is F7a - read a lot of stories how wonky & f*cked up GB's BIOSes can be, but this...... RMA for either or both mobo & CPU? lol And yeah, i'd like to see this shit too, don't worry, actually these 2x16GBs of DDR4 2400MHz RAM will (most definitely) be replaced with 2x8GB of DDR4 3600MHz HyperX Predators just to suit my all black/LED RGB rig aesthetics, will purchase GB's 2xGTX 1070 G1s along with Samsung's 950 Pro M.2, just gimme few months tho. lol

P.S. M$'s Edge browser is one whacky POS, back to good ol' IE11, lol, also uninstalled a bunch of Win 10 shit i don't feel i need, IE11 FTW!!!! Sorry for OT, cheers all.

Testing if something is wonky with RAM sticks, how do you find out if whether BIOS or CPU done f*cked up as well? (sorry for AngryJoe-esque gimmick, lol jk) Will take me some time to figure out if either RAM slot(s) or RAM sticks went FUBAR. Prior to removing one of RAM sticks i had 2 series of 3 short beeps followed by one series of single long beep, PC turn off & back on between each of the series, than it would get back to normal short beep, POST, Win 10. Now it's one short beep, Win 10, done. Albeit with one 16GB stick.

 

[YautjaLord]

Update time, sorry for double post. Here:

Using Ryzen Master, so far so good. Will keep going, definitely won't OC RAM at all, atleast til I get my hands on 2x8GB HyperX Predator 3600MHz, 1541cbs on 3.6GHz made easy eh? lol Cheers.

P.S. Left vCore & SoC voltages at their Ryzen Master defaults, i.e. didn't touched these for now, vCore is at 1.325 methink.

P.P.S. 3.40GHz? Why? 3.40 is better than 3.40? Dafuk? Quirky dorky CinebenchR15? lol

 

[ChristTheGreat]

1700 here, with a gigabyte AX370-Gaming K3, Corsair 2666mhz, cpu goes to 3.65ghz at 1.33v, can't even reach 3.8ghz with 1.38v. I guess the board is not suited for good overclock, as there is no loadline calibration, or fixed voltage

 

[Norton]

1700 here, with a gigabyte AX370-Gaming K3, Corsair 2666mhz, cpu goes to 3.65ghz at 1.33v, can't even reach 3.8ghz with 1.38v. I guess the board is not suited for good overclock, as there is no loadline calibration, or fixed voltage

Gotta crunch that beast... should be good for 12k ppd

 

[agent00skid]

My Ryzen 5 1400 in an AsRock AB350 Pro4 with a 4GB stick of whatever memory. CPU at 3,75GHz and 3066CL18 on the memory.

 

[ChristTheGreat]

Gotta crunch that beast... should be good for 12k ppd

WIll soon