• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Alphacool Unveils the Eisbaer Refill Kit

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
46,277 (7.69/day)
Location
Hyderabad, India
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard ASUS ROG Strix B450-E Gaming
Cooling DeepCool Gammax L240 V2
Memory 2x 8GB G.Skill Sniper X
Video Card(s) Palit GeForce RTX 2080 SUPER GameRock
Storage Western Digital Black NVMe 512GB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
Alphacool today unveiled the Eisbaer Refill Kit. The refill kit contains all of the important tools you need to fill your Eisbaer CPU water cooling system with a few simple steps. This includes a funnel with G1/4" thread, a high-quality thermal paste in a syringe, an adapter cable for the pump and an ATX jumper plug.

Remove the Eisbaer from your ensuring your power supply is turned off. Unplug the 24-pin ATX connector from the mainboard and fit the ATX jumper plug to it. Place the radiator on a table and the Eisbaer CPU/pump/Reservoir unit on a slightly elevated surface. Then simply mount the funnel on the fillport. With the SATA to 3-pin adapter cable you can now connect the pump of the Eisbaer to your power supply. Now slowly fill the Eisbaer with your liquid until the reservoir is full. Now you can switch on the power supply again. The ATX bridging plug starts the power supply unit and the pump of the Eisbaer starts to work. It is important that you turn off the pump occasionally to refill with liquid. The pump must never run dry.



When the Eisbaer is full, you can plug the fillport again. Then let the Eisbaer run a little outside your case, while you shake the Eisbaer in all directions. Ideally, always hold the radiator lower than the Eisbaer CPU/pump/Reservoir unit unit so that the air can move upwards into the reservoir. You will notice that you may need to top up some liquid. The reservoir should be approximately 90% full at the end of the procedure.


MSRP: 9.95€.

View at TechPowerUp Main Site
 
Joined
Apr 18, 2013
Messages
66 (0.02/day)
Location
Radio Emilia 5.9
System Name anime_server//home_pc//rufy_pc//htpc//film_server
Processor EQ8300@3.03/E7200@3.16/E8400@3.06/E5300@2.93/J1900
Motherboard Asus P5Q-DLX/MSI G31M3-L V2/GA-G41M-ES2L/AsRock Conroe1333-D667/AsRock Q1900-ITX
Cooling CM Hyper48+Vantec Tornado/stock/Asus Triton/stock/stock
Memory 2*2G PI8000+2*1G Extreme800+/2*2G PC2-6400/1*2G+1*512M PC2-6400/2*1G Kingston PC2-6400/2*4G so-DDR3
Video Card(s) Palit GTX460 1GB w EK Supreme/GTS240 1GB/Asus HD4550 512MB/Asus 7200GS 128MB/iHD
Storage too many in too many config
Display(s) Asus VS239--BenQ G922HDL--Philips 191V--Panasonic TX-40CS620--BenQ 2220HDL
Case Chieftec super towa--Nokia Style--TechSolo TC-020--Lenovo Case--NXT one
Audio Device(s) Creative Audigy!--onboard--onboard--onboard--onboard
Power Supply Corsair TX850 w Aerocool fan--Antec EA380--FSP-300-60GHS--crappy one--LC-Power LC7300
Software W7Pro x64--W8.1Pro--W7Pro x64--W7Pro--Win server 2012r2
Benchmark Scores need more GB, more GPU and more CPU.. at least can share all with my rig
well..
i do not like reservoir placed lower than rad.. you will have half of the rad filled with air and bubble going in circle (and so lower thermal conductivity in both WB and RAD)
"long time ago" there were 5.25" reservoir or tube-style placed in the upper end of the case and so the filling of loop was easy and well done.. now you have reservoir placed bottom.
i do not understand why business focalize more on eastethics than performance.
bubble...bubble everywhere
 
Joined
Nov 13, 2007
Messages
10,209 (1.71/day)
Location
Austin Texas
Processor 13700KF Undervolted @ 5.6/ 5.5, 4.8Ghz Ring 200W PL1
Motherboard MSI 690-I PRO
Cooling Thermalright Peerless Assassin 120 w/ Arctic P12 Fans
Memory 48 GB DDR5 7600 MHZ CL36
Video Card(s) RTX 4090 FE
Storage 2x 2TB WDC SN850, 1TB Samsung 960 prr
Display(s) Alienware 32" 4k 240hz OLED
Case SLIGER S620
Audio Device(s) Yes
Power Supply Corsair SF750
Mouse Xlite V2
Keyboard RoyalAxe
Software Windows 11
Benchmark Scores They're pretty good, nothing crazy.
Yeah the main issue with that fillport is definitely not the lack of a funnel. :D
 
Joined
Feb 1, 2013
Messages
1,248 (0.31/day)
System Name Gentoo64 /w Cold Coffee
Processor 9900K 5.2GHz @1.312v
Motherboard MXI APEX
Cooling Raystorm Pro + 1260mm Super Nova
Memory 2x16GB TridentZ 4000-14-14-28-2T @1.6v
Video Card(s) RTX 4090 LiquidX Barrow 3015MHz @1.1v
Storage 660P 1TB, 860 QVO 2TB
Display(s) LG C1 + Predator XB1 QHD
Case Open Benchtable V2
Audio Device(s) SB X-Fi
Power Supply MSI A1000G
Mouse G502
Keyboard G815
Software Gentoo/Windows 10
Benchmark Scores Always only ever very fast
lil late for april fools
 
Joined
Nov 7, 2017
Messages
1,311 (0.56/day)
Location
Ibiza, Spain.
System Name Main
Processor R7 5950x
Motherboard MSI x570S Unify-X Max
Cooling D5 clone, 280 rad, two F14 + three F12S bottom/intake, two P14S + F14S (Rad) + two F14 (top)
Memory 2x8 GB Corsair Vengeance bdie 3600@CL16 1.35v
Video Card(s) GB 2080S WaterForce WB
Storage six M.2 pcie gen 4
Display(s) Sony 50X90J
Case Tt Level 20 HT
Audio Device(s) Asus Xonar AE, modded Sennheiser HD 558, Klipsch 2.1 THX
Power Supply Corsair RMx 750w
Mouse Logitech G903
Keyboard GSKILL Ripjaws
VR HMD NA
Software win 10 pro x64
Benchmark Scores TimeSpy score Fire Strike Ultra SuperPosition CB20
well..
i do not like reservoir placed lower than rad.. you will have half of the rad filled with air and bubble going in circle (and so lower thermal conductivity in both WB and RAD)
Lol, a proper filled system will not have ANY air in it (thats why you start running it outside first), and the water will push air out of the rad.
The small bubble of air inside the res is irrelevant, as long as window faces up.

Dont blame a product if you dont know what/how to do stuff, and dont want to spend 5min on google..
 
Joined
Jun 29, 2009
Messages
1,871 (0.35/day)
Location
Heart of Eutopia!
System Name ibuytheusedstuff
Processor 5960x
Motherboard x99 sabertooth
Cooling old socket775 cooler
Memory 32 Viper
Video Card(s) 1080ti on morpheus 1
Storage raptors+ssd
Display(s) acer 120hz
Case open bench
Audio Device(s) onb
Power Supply antec 1200 moar power
Mouse mx 518
Keyboard roccat arvo
just use a cone of paper or cut the filler plug from a plastic bottle.
no need to buy everything (in plastic) when you got good alternatives at home or you got enough plastic bottles at home.
 
Joined
Jun 2, 2017
Messages
7,797 (3.13/day)
System Name Best AMD Computer
Processor AMD 7900X3D
Motherboard Asus X670E E Strix
Cooling In Win SR36
Memory GSKILL DDR5 32GB 5200 30
Video Card(s) Sapphire Pulse 7900XT (Watercooled)
Storage Corsair MP 700, Seagate 530 2Tb, Adata SX8200 2TBx2, Kingston 2 TBx2, Micron 8 TB, WD AN 1500
Display(s) GIGABYTE FV43U
Case Corsair 7000D Airflow
Audio Device(s) Corsair Void Pro, Logitch Z523 5.1
Power Supply Deepcool 1000M
Mouse Logitech g7 gaming mouse
Keyboard Logitech G510
Software Windows 11 Pro 64 Steam. GOG, Uplay, Origin
Benchmark Scores Firestrike: 46183 Time Spy: 25121
The jumper is nice but Alphacool already sells a refill kit that comes with a bottle with a snake and any kitchen funnel works as well. The price is not bad though.
 
Top