- Joined
- Apr 6, 2015
- Messages
- 246 (0.07/day)
- Location
- Japan
System Name | ChronicleScienceWorkStation |
---|---|
Processor | AMD Threadripper 1950X |
Motherboard | Asrock X399 Taichi |
Cooling | Noctua U14S-TR4 |
Memory | G.Skill DDR4 3200 C14 16GB*4 |
Video Card(s) | AMD Radeon VII |
Storage | Samsung 970 Pro*1, Kingston A2000 1TB*2 RAID 0, HGST 8TB*5 RAID 6 |
Case | Lian Li PC-A75X |
Power Supply | Corsair AX1600i |
Software | Proxmox 6.2 |
The chassis's side panel has a bump (there was a defect when the aluminum was folded), that made it hard to close the case properly.
I only realize it today after the machine has been assembled after a week, I didn't want to return the chassis for this reason so I used a plier to flatten the bump.
To so do, I put multilayers of foam between both side of the panel and the pliers to not leave scratches, but then I could still see some marks:
They are actually quite small and on a side that I don't get to see, but I wonder if there is anything I can apply to make them less apparent?
I only realize it today after the machine has been assembled after a week, I didn't want to return the chassis for this reason so I used a plier to flatten the bump.
To so do, I put multilayers of foam between both side of the panel and the pliers to not leave scratches, but then I could still see some marks:
They are actually quite small and on a side that I don't get to see, but I wonder if there is anything I can apply to make them less apparent?