• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Search results

  1. Malik Sajid

    Unigine Heaven 4.0 Benchmark Scores Part 2

    Is the temp okay for that fan speed?
  2. Malik Sajid

    Unigine Heaven 4.0 Benchmark Scores Part 2

    Nice score there, mate! I think heaven isn't optimized to benefit from multithreading, in this situation i3-6100 > i7-950 single thread performance wise and packed with some newer instructions, Also let's not overlook that these clocks +1500mhz/2250mhz are quite high for an Rx 570 within the...
  3. Malik Sajid

    RivaTuner Statistic Server Scanline Sync

    Woah! chill out glorious Alex Unwinder and don't put words in my mouth. No need to put yourself in the victim cage, No one called you an "evil developer" or even asked you to provide 24/7 online support to poor Malik! It's a free software and you have all the power not to dedicate a neat and...
  4. Malik Sajid

    RivaTuner Statistic Server Scanline Sync

    That's right. lower the negative value to get the tear line out of the screen. S-Sync X2 allow RTSS to cap fps at (Refresh rate x2) X/2 allow it to cap at half of the refresh rate in case you can't maintain 60fps on a 60hz monitor e.g. You shouldn't. When you using scanline sync, RTSS will...
  5. Malik Sajid

    RivaTuner Statistic Server Scanline Sync

    It's better to combine scanline sync with vsync off to get similar results as freesync on non-VRR monitors, but you can still use it with fastsync, it will give you lower input than normal vsync anyway. Now to answer your question, you're dealing with your monitor vertical line so what does...
  6. Malik Sajid

    RivaTuner Statistic Server Scanline Sync

    Well, the best value depends on the sync mode you're using. For vsync off, enter -100 in the scanline sync field, if the tear line isn't visible then you're good to go, if it's visible consistently in the bottom of the screen, then you need to push it further out, go and lower the negative...
  7. Malik Sajid

    RivaTuner Statistic Server Scanline Sync

    Scanline sync value doesn't function as a fps limiter but it's meant to sync the tear line with a certain vertical line in your monitor. Now let's say that your 1080p monitor got 1125 vertical line [1080 visible lines + 45 invisible lines], so if you use 500 as a sync value you'll get the tear...
  8. Malik Sajid

    High FPS but games stutter/choppy

    For those games that doesn't make you able to activate vsync or freesync, you may want to try scanlinesync method via RTSS, it gives the same results as freesync, good frame pacing, no tearing or stuttering, low input-lag.
  9. Malik Sajid

    High FPS but games stutter/choppy

    https://community.amd.com/thread/226170
  10. Malik Sajid

    High FPS but games stutter/choppy

    That's not how things go in AMD driver UI, there's no apply button, you just select vsync off within certain game profile and you're done. It's known issue with amd driver. the only mode that works for me through the driver is the enhanced sync.
  11. Malik Sajid

    High FPS but games stutter/choppy

    I've an RX 570. AMD driver vsync control is completely useless, it doesn't allow me to get vsync disabled for many games. I'm using RadeonPro, it allows you to disable vsync properly, control flip queue size, which should come in handy in your situation. I also want to say that some engines...
  12. Malik Sajid

    Dell Workstation Owners Club

    Sorry, I should've mentioned that! It was running on a pretty old ver 'A02', I had to updated it first to 'A06' as a transition stage so I can be able to update it to the latest ver 'A17' Here's a link including all the versions of BIOS...
  13. Malik Sajid

    Dell Workstation Owners Club

    Good tip that everyone is working on those kinds of machines needs to know but it wasn't the case, it turned out to be the BIOS, I've updated it for him then reinstalled the same LTSC copy without any issues. Thanks guys for your replies, really appreciate it.
  14. Malik Sajid

    Dell Workstation Owners Club

    Yes, Since you've conformed that T3500 is capable of running Win10 with no problems then he should try a different one.
  15. Malik Sajid

    Dell Workstation Owners Club

    It's a clean and raw LTSC version by the way. Any BIOS settings need to be adjusted?
  16. Malik Sajid

    Dell Workstation Owners Club

    Hi.. A friend of mine got T3500 w/ x5670 + gtx 1060, but it seems that he isn't able to install Windows 10 properly, 'Your PC needs to be restarted' keeps showing up, are there any compatability issues in this situation? Does T3500 support windows 10? Also he's running two different rams; one...
  17. Malik Sajid

    AMD Readies Radeon Adrenalin 2019 Edition, You Can Talk to Your Graphics Card

    Actually I've a real Sapphire Nitro+ RX 570 not an RX 580 2048SP, but the newer drivers is identifying it as an RX 580! when I've rolled back to a random old driver it's been detected as an RX 570! Do you think they've modified the drivers so it can detect the 2048SP version (((which is just an...
  18. Malik Sajid

    AMD Readies Radeon Adrenalin 2019 Edition, You Can Talk to Your Graphics Card

    But can it show my RX 570 as an actual RX 570 not an RX 580?
  19. Malik Sajid

    Unigine Heaven 4.0 Benchmark Scores Part 2

    Yeah It was me, What a thread! :D Actually I checked it out yesterday but I've really got so confused then I thought it's supposed to be a lot easier in this situation since trixx is alread able to do +200mv but I think I'm wrong about that and I guess we got nothing to do with the I2C approach...
  20. Malik Sajid

    Unigine Heaven 4.0 Benchmark Scores Part 2

    After restarting Overdrive says that's I2C isn't available, My problem with trixx is that I've already tried to do +200mv with it but it doesn't seem to be accurate like AB, it was doing some random scary voltage spikes and bypassing 1.3v to 1.35v I was afraid at this point so I cancelled the...
  21. Malik Sajid

    Unigine Heaven 4.0 Benchmark Scores Part 2

    [Update] i7-950 @ 4.0GHz + RX 570 @ 1540/2250 = 1459 I've noticed that Trixx allows to add +200mv unlike Msi AB which only allows +100mv, so would it be safe to go to 1.3v to bench @1600mhz not for daily use ofc? and is there anyway to make AB able to push those 200mv like trixx?
  22. Malik Sajid

    Which part of a graphics card is most likely to have failed when there is no video output?

    All possibilities exist. It's hard to tell without examine the card physically. But since all the sockets usually are exposed to the same conditions and one of them is still working I'd rule out losing the contact with the PCB. HDMI and DP are hollow compared to VGA and DVI so most likely the...
  23. Malik Sajid

    Unigine Heaven 4.0 Benchmark Scores Part 2

    The first RX 570 is here.. i7-950 @ 3.0GHz + Rx 570 8Gb @ 1540/2250 = 1436
  24. Malik Sajid

    I just bought an ex-mining gpu but it's confusing me!

    Okay guys, It's a driver related issue. I've wiped the drivers (latest) with DDU then rolled back to crimson relive 17.11.4 and GPU-Z identified it as an rx 570. Thanks for all of you! Yeah fortunately it is. I keep one chip safe and playing with the other one Thanks for your time and efforts...
  25. Malik Sajid

    I just bought an ex-mining gpu but it's confusing me!

    Thanks for your concern! I'm not an expert but I'm familiar with flashing cards, actually this card has dual bios chips so I'm doing all the dirty works on one of them. I'll try that paired with the latest crimson relive driver 17.11.4, talking about the chipset driver I forget to say that I've...
Top